lkml.org 
[lkml]   [2013]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH REPOST] ARM: tegra: use dt-binding header for key code
Date
In place of hardcoding the key code in DTS file and comment the
key code as side notes, use the key code macro defines in the
dt-bindings/input/input.h directly.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
Reposting this patch as it was sent earlier when merge window was closed.

arch/arm/boot/dts/tegra114-dalmore.dts | 9 +++++----
1 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 6023028..05a3aae 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -1,5 +1,6 @@
/dts-v1/;

+#include <dt-bindings/input/input.h>
#include "tegra114.dtsi"

/ {
@@ -1081,26 +1082,26 @@
home {
label = "Home";
gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
- linux,code = <102>; /* KEY_HOME */
+ linux,code = <KEY_HOME>;
};

power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
- linux,code = <116>; /* KEY_POWER */
+ linux,code = <KEY_POWER>;
gpio-key,wakeup;
};

volume_down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
- linux,code = <114>; /* KEY_VOLUMEDOWN */
+ linux,code = <KEY_VOLUMEDOWN>;
};

volume_up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
- linux,code = <115>; /* KEY_VOLUMEUP */
+ linux,code = <KEY_VOLUMEUP>;
};
};

--
1.7.1.1


\
 
 \ /
  Last update: 2013-09-18 15:21    [W:0.092 / U:0.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site