lkml.org 
[lkml]   [2013]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/8] pch_uart: Add uart_clk selection for the MinnowBoard
Date
Use DMI_BOARD_NAME to determine if we are running on a MinnowBoard and
set the uart clock to 50MHz if so. This removes the need to pass the
user_uartclk to the kernel at boot time.

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Waskiewicz <peter.p.waskiewicz.jr@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: linux-serial@vger.kernel.org
---
drivers/tty/serial/pch_uart.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 21a7e17..572d481 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -217,6 +217,7 @@ enum {
#define FRI2_64_UARTCLK 64000000 /* 64.0000 MHz */
#define FRI2_48_UARTCLK 48000000 /* 48.0000 MHz */
#define NTC1_UARTCLK 64000000 /* 64.0000 MHz */
+#define MINNOW_UARTCLK 50000000 /* 50.0000 MHz */

struct pch_uart_buffer {
unsigned char *buf;
@@ -398,6 +399,10 @@ static int pch_uart_get_uartclk(void)
strstr(cmp, "nanoETXexpress-TT")))
return NTC1_UARTCLK;

+ cmp = dmi_get_system_info(DMI_BOARD_NAME);
+ if (cmp && strstr(cmp, "MinnowBoard"))
+ return MINNOW_UARTCLK;
+
return DEFAULT_UARTCLK;
}

--
1.8.1.2


\
 
 \ /
  Last update: 2013-06-26 04:21    [W:0.341 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site