lkml.org 
[lkml]   [2013]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V6 28/30] thermal: exynos: Support for TMU regulator defined at device tree
Date
TMU probe function now checks for a device tree defined regulator.
For compatibility reasons it is allowed to probe driver even without
this regulator defined.

Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
---
.../devicetree/bindings/thermal/exynos-thermal.txt | 4 +++
drivers/thermal/samsung/exynos_tmu.c | 23 ++++++++++++++++++++
2 files changed, 27 insertions(+), 0 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
index e6386ea..284f530 100644
--- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
@@ -16,6 +16,9 @@
- interrupts : Should contain interrupt for thermal system
- clocks : The main clock for TMU device
- clock-names : Thermal system clock name
+- vtmu-supply: This entry is optional and provides the regulator node supplying
+ voltage to TMU. If needed this entry can be placed inside
+ board/platform specific dts file.

Example 1):

@@ -27,6 +30,7 @@ Example 1):
clocks = <&clock 383>;
clock-names = "tmu_apbif";
status = "disabled";
+ vtmu-supply = <&tmu_regulator_node>;
};

Example 2):
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 7a259f4..441efd5 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -29,6 +29,7 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>

#include "exynos_thermal_common.h"
#include "exynos_tmu.h"
@@ -48,6 +49,7 @@
* @clk: pointer to the clock structure.
* @temp_error1: fused value of the first point trim.
* @temp_error2: fused value of the second point trim.
+ * @regulator: pointer to the TMU regulator structure.
* @reg_conf: pointer to structure to register with core thermal.
*/
struct exynos_tmu_data {
@@ -61,6 +63,7 @@ struct exynos_tmu_data {
struct mutex lock;
struct clk *clk;
u8 temp_error1, temp_error2;
+ struct regulator *regulator;
struct thermal_sensor_conf *reg_conf;
};

@@ -510,10 +513,27 @@ static int exynos_map_dt_data(struct platform_device *pdev)
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct exynos_tmu_platform_data *pdata;
struct resource res;
+ int ret;

if (!data)
return -ENODEV;

+ /*
+ * Try enabling the regulator if found
+ * TODO: Add regulator as an SOC feature, so that regulator enable
+ * is a compulsory call.
+ */
+ data->regulator = devm_regulator_get(&pdev->dev, "vtmu");
+ if (!IS_ERR(data->regulator)) {
+ ret = regulator_enable(data->regulator);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable vtmu\n");
+ return ret;
+ }
+ } else {
+ dev_info(&pdev->dev, "Regulator node (vtmu) not found\n");
+ }
+
data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl");
if (data->id < 0)
data->id = 0;
@@ -680,6 +700,9 @@ static int exynos_tmu_remove(struct platform_device *pdev)

clk_unprepare(data->clk);

+ if (!IS_ERR(data->regulator))
+ regulator_disable(data->regulator);
+
return 0;
}

--
1.7.1


\
 
 \ /
  Last update: 2013-06-17 09:41    [W:0.727 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site