lkml.org 
[lkml]   [2013]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/7] gpio: mvebu: use irq_get_trigger_type() to get IRQ flags
Date
Use irq_get_trigger_type() to get the IRQ trigger type flags
instead calling irqd_get_trigger_type(irq_get_irq_data(irq))

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
---
drivers/gpio/gpio-mvebu.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index 3a4816a..80ad35e 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -457,7 +457,7 @@ static void mvebu_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
if (!(cause & (1 << i)))
continue;

- type = irqd_get_trigger_type(irq_get_irq_data(irq));
+ type = irq_get_trigger_type(irq);
if ((type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
/* Swap polarity (race with GPIO line) */
u32 polarity;
--
1.7.7.6


\
 
 \ /
  Last update: 2013-06-14 20:21    [W:0.146 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site