lkml.org 
[lkml]   [2013]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/7] mfd: twl4030-irq: use irq_get_trigger_type() to get IRQ flags
Date
Use irq_get_trigger_type() to get the IRQ trigger type flags
instead calling irqd_get_trigger_type(irq_get_irq_data(irq))

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
---
drivers/mfd/twl4030-irq.c | 5 +----
1 files changed, 1 insertions(+), 4 deletions(-)

diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index a5f9888..9d2d1ba 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -537,16 +537,13 @@ static void twl4030_sih_bus_sync_unlock(struct irq_data *data)
/* Modify only the bits we know must change */
while (edge_change) {
int i = fls(edge_change) - 1;
- struct irq_data *idata;
int byte = i >> 2;
int off = (i & 0x3) * 2;
unsigned int type;

- idata = irq_get_irq_data(i + agent->irq_base);
-
bytes[byte] &= ~(0x03 << off);

- type = irqd_get_trigger_type(idata);
+ type = irq_get_trigger_type(i + agent->irq_base);
if (type & IRQ_TYPE_EDGE_RISING)
bytes[byte] |= BIT(off + 1);
if (type & IRQ_TYPE_EDGE_FALLING)
--
1.7.7.6


\
 
 \ /
  Last update: 2013-06-14 20:21    [W:0.151 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site