lkml.org 
[lkml]   [2013]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] gpio: ich: add GPO_BLINK support
Date
This patch makes sure blink hardware is disabled for selected GPIO. Blink
hardware is controled by GPO_BLINK register and is available for GPIOs from 0
to 31.

Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com>

diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c
index de3c317..181828f 100644
--- a/drivers/gpio/gpio-ich.c
+++ b/drivers/gpio/gpio-ich.c
@@ -41,12 +41,14 @@ enum GPIO_REG {
GPIO_USE_SEL = 0,
GPIO_IO_SEL,
GPIO_LVL,
+ GPO_BLINK
};

-static const u8 ichx_regs[3][3] = {
+static const u8 ichx_regs[4][3] = {
{0x00, 0x30, 0x40}, /* USE_SEL[1-3] offsets */
{0x04, 0x34, 0x44}, /* IO_SEL[1-3] offsets */
{0x0c, 0x38, 0x48}, /* LVL[1-3] offsets */
+ {0x18, 0x18, 0x18}, /* BLINK offset */
};

static const u8 ichx_reglen[3] = {
@@ -154,6 +156,10 @@ static int ichx_gpio_direction_output(struct gpio_chip *gpio, unsigned nr,
if (!ichx_gpio_check_available(gpio, nr))
return -ENXIO;

+ /* Disable blink hardware which is available for GPIOs from 0 to 31. */
+ if (nr < 32)
+ ichx_write_bit(GPO_BLINK, nr, 0, 0);
+
/* Set GPIO output value. */
ichx_write_bit(GPIO_LVL, nr, val, 0);

--
1.7.9.5


\
 
 \ /
  Last update: 2013-06-14 16:21    [W:1.072 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site