lkml.org 
[lkml]   [2013]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] I2C: Fix i2c fail problem when a process is terminated by a signal on octeon in 3.8

I rewrite my patch because the patch before i sent have many white space.
Thanks!
---
I've been debugging the abnormal operation of i2c on octeon.
If a process is terminated by signal in the middle of i2c operation,
next i2c read operation which is done by another process was failed.
So i changed to ignore signal in the middle of i2c operation.
After that the problem was not reproduced.

Signed-off-by: Eunbong Song <eunb.song@samsung.com>
---
drivers/i2c/busses/i2c-octeon.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c
index 935585e..b2e3259 100644
--- a/drivers/i2c/busses/i2c-octeon.c
+++ b/drivers/i2c/busses/i2c-octeon.c
@@ -183,7 +183,7 @@ static irqreturn_t octeon_i2c_isr(int irq, void *dev_id)
struct octeon_i2c *i2c = dev_id;

octeon_i2c_int_disable(i2c);
- wake_up_interruptible(&i2c->queue);
+ wake_up(&i2c->queue);

return IRQ_HANDLED;
}
@@ -206,9 +206,9 @@ static int octeon_i2c_wait(struct octeon_i2c *i2c)

octeon_i2c_int_enable(i2c);

- result = wait_event_interruptible_timeout(i2c->queue,
- octeon_i2c_test_iflg(i2c),
- i2c->adap.timeout);
+ result = wait_event_timeout(i2c->queue,
+ octeon_i2c_test_iflg(i2c),
+ i2c->adap.timeout);

octeon_i2c_int_disable(i2c);

--
1.7.0.4
\
 
 \ /
  Last update: 2013-04-18 10:21    [W:0.038 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site