lkml.org 
[lkml]   [2013]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Input: synaptics - disable fuzz when using mt slots
Date
The input fuzz algorithm does a pretty good job filtering out small
jitter on input samples.

However, there is a subtle problem when fuzz is used with mt drivers that
also use input_mt_report_pointer_emulation() to report legacy single
touch coordinates. The reported single touch coordinates are taken from
the active MT slot with smallest tracking id. However, since the MT data
is sent first, it has already had FUZZ applied. Thus, the ST coordinates
actually get FUZZ applied a second time, with the just-fuzzed MT value as
the 'old value'.

It appears that it is non-trivial to fix this in the mt layer/input core,
so, for now, just disable fuzz for the synaptics IMAGE_SENSOR path that
uses input_mt_report_pointer_emulation().

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
---
drivers/input/mouse/synaptics.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 12d12ca..b6c6838 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -1211,7 +1211,8 @@ static void set_abs_position_params(struct input_dev *dev,
int x_max = priv->x_max ?: XMAX_NOMINAL;
int y_min = priv->y_min ?: YMIN_NOMINAL;
int y_max = priv->y_max ?: YMAX_NOMINAL;
- int fuzz = SYN_CAP_REDUCED_FILTERING(priv->ext_cap_0c) ?
+ int fuzz = (SYN_CAP_REDUCED_FILTERING(priv->ext_cap_0c) &&
+ !SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) ?
SYN_REDUCED_FILTER_FUZZ : 0;

input_set_abs_params(dev, x_code, x_min, x_max, fuzz, 0);
--
1.8.1


\
 
 \ /
  Last update: 2013-02-01 10:01    [W:0.047 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site