lkml.org 
[lkml]   [2013]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCHv2] iio: mxs-lradc: compute temperature from channel 8 and 9
Date
The mxs LRADC is able to read an internal die temperature sensor. The
temperature has to be calculated from the value read on channel 8 and channel 9.
To be able to expose the result to hwmon, implement iio channel 8 as
(channel 9 - channel 8). Then, implement IIO_CHAN_INFO_SCALE and
IIO_CHAN_INFO_OFFSET so that it can be processed by hwmon through the in kernel
provider/consumer mechanism.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
---
Changes in v2:
- rebased on v3.13.0-rc3

drivers/staging/iio/adc/mxs-lradc.c | 91 +++++++++++++++++++++++++++++++------
1 file changed, 78 insertions(+), 13 deletions(-)

diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c
index e2dd7830b320..5a4499c3d22a 100644
--- a/drivers/staging/iio/adc/mxs-lradc.c
+++ b/drivers/staging/iio/adc/mxs-lradc.c
@@ -759,20 +759,11 @@ static void mxs_lradc_handle_touch(struct mxs_lradc *lradc)
/*
* Raw I/O operations
*/
-static int mxs_lradc_read_raw(struct iio_dev *iio_dev,
- const struct iio_chan_spec *chan,
- int *val, int *val2, long m)
+static int mxs_lradc_read_single(struct iio_dev *iio_dev, int chan, int *val)
{
struct mxs_lradc *lradc = iio_priv(iio_dev);
int ret;

- if (m != IIO_CHAN_INFO_RAW)
- return -EINVAL;
-
- /* Check for invalid channel */
- if (chan->channel > LRADC_MAX_TOTAL_CHANS)
- return -EINVAL;
-
/*
* See if there is no buffered operation in progess. If there is, simply
* bail out. This can be improved to support both buffered and raw IO at
@@ -797,7 +788,7 @@ static int mxs_lradc_read_raw(struct iio_dev *iio_dev,

/* Clean the slot's previous content, then set new one. */
mxs_lradc_reg_clear(lradc, LRADC_CTRL4_LRADCSELECT_MASK(0), LRADC_CTRL4);
- mxs_lradc_reg_set(lradc, chan->channel, LRADC_CTRL4);
+ mxs_lradc_reg_set(lradc, chan, LRADC_CTRL4);

mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(0));

@@ -824,6 +815,71 @@ err:
return ret;
}

+static int mxs_lradc_read_temp(struct iio_dev *iio_dev, int *val)
+{
+ int ret, min, max;
+
+ ret = mxs_lradc_read_single(iio_dev, 8, &min);
+ if (ret != IIO_VAL_INT)
+ return ret;
+
+ ret = mxs_lradc_read_single(iio_dev, 9, &max);
+ if (ret != IIO_VAL_INT)
+ return ret;
+
+ *val = max - min;
+
+ return IIO_VAL_INT;
+}
+
+static int mxs_lradc_read_raw(struct iio_dev *iio_dev,
+ const struct iio_chan_spec *chan,
+ int *val, int *val2, long m)
+{
+ /* Check for invalid channel */
+ if (chan->channel > LRADC_MAX_TOTAL_CHANS)
+ return -EINVAL;
+
+ switch (m) {
+ case IIO_CHAN_INFO_RAW:
+ if (chan->type == IIO_TEMP)
+ return mxs_lradc_read_temp(iio_dev, val);
+
+ return mxs_lradc_read_single(iio_dev, chan->channel, val);
+
+ case IIO_CHAN_INFO_SCALE:
+ if (chan->type == IIO_TEMP) {
+ /* From the datasheet, we have to multiply by 1.012 and
+ * divide by 4
+ */
+ *val = 0;
+ *val2 = 253000;
+ return IIO_VAL_INT_PLUS_MICRO;
+ }
+
+ return -EINVAL;
+
+ case IIO_CHAN_INFO_OFFSET:
+ if (chan->type == IIO_TEMP) {
+ /* The calculated value from the ADC is in Kelvin, we
+ * want Celsius for hwmon so the offset is
+ * -272.15 * scale
+ */
+ *val = -1075;
+ *val2 = 691699;
+
+ return IIO_VAL_INT_PLUS_MICRO;
+ }
+
+ return -EINVAL;
+
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+
static const struct iio_info mxs_lradc_iio_info = {
.driver_module = THIS_MODULE,
.read_raw = mxs_lradc_read_raw,
@@ -1151,8 +1207,17 @@ static const struct iio_chan_spec mxs_lradc_chan_spec[] = {
MXS_ADC_CHAN(5, IIO_VOLTAGE),
MXS_ADC_CHAN(6, IIO_VOLTAGE),
MXS_ADC_CHAN(7, IIO_VOLTAGE), /* VBATT */
- MXS_ADC_CHAN(8, IIO_TEMP), /* Temp sense 0 */
- MXS_ADC_CHAN(9, IIO_TEMP), /* Temp sense 1 */
+ /* Combined Temperature sensors */
+ {
+ .type = IIO_TEMP,
+ .indexed = 1,
+ .scan_index = 8,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_OFFSET) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ .channel = 8,
+ .scan_type = {.sign = 'u', .realbits = 18, .storagebits = 32,},
+ },
MXS_ADC_CHAN(10, IIO_VOLTAGE), /* VDDIO */
MXS_ADC_CHAN(11, IIO_VOLTAGE), /* VTH */
MXS_ADC_CHAN(12, IIO_VOLTAGE), /* VDDA */
--
1.8.3.2


\
 
 \ /
  Last update: 2013-12-06 20:41    [W:0.046 / U:1.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site