lkml.org 
[lkml]   [2013]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] regulator: as3722: Don't set min_uV/uV_step/linear_min_sel for linear_ranges
From
Date
These settings are not used when using linear_ranges and it makes the code
looks confusing. Thus remove them.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/regulator/as3722-regulator.c | 3 ---
1 file changed, 3 deletions(-)

diff --git a/drivers/regulator/as3722-regulator.c b/drivers/regulator/as3722-regulator.c
index b9f1d24..27fe63c 100644
--- a/drivers/regulator/as3722-regulator.c
+++ b/drivers/regulator/as3722-regulator.c
@@ -842,9 +842,6 @@ static int as3722_regulator_probe(struct platform_device *pdev)
ops = &as3722_ldo_extcntrl_ops;
else
ops = &as3722_ldo_ops;
- as3722_regs->desc[id].min_uV = 825000;
- as3722_regs->desc[id].uV_step = 25000;
- as3722_regs->desc[id].linear_min_sel = 1;
as3722_regs->desc[id].enable_time = 500;
as3722_regs->desc[id].linear_ranges = as3722_ldo_ranges;
as3722_regs->desc[id].n_linear_ranges =
--
1.8.1.2




\
 
 \ /
  Last update: 2013-12-20 06:21    [W:0.051 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site