[lkml]   [2013]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH V7 0/7] POWER/cpuidle: Generic IBM-POWER cpuidle driver enabled for PSERIES and POWERNV platforms
This patch series consolidates the backend cpuidle driver for pSeries
and powernv platforms with minimal code duplication.

Current existing backend driver for pseries has been moved to drivers/cpuidle
and has been extended to accommodate powernv idle power mgmt states.
As seen in V1 of this patch series, having a separate powernv backend driver
results in too much code duplication, which is less elegant and can pose
maintenance problems going further.

Using the cpuidle framework to exploit platform low power idle states
management can take advantage of advanced heuristics, tunables and features
provided by framework. The statistics and tracing infrastructure provided
by the cpuidle framework also helps in enabling power management
related tools and help tune the system and applications.

Earlier in 3.3 kernel, pSeries idle state management was modified to
exploit the cpuidle framework and the end goal of this patch is to have powernv
platform also to hook its idle states into cpuidle framework with minimal
code duplication between both platforms.

This series aims to maintain compatibility and functionality to existing pseries
and powernv idle cpu management code. There are no new functions or idle
states added as part of this series. This can be extended by adding more
states to this existing framework.

With this patch series, the powernv cpuidle functionalities are on-par with
pSeries idle management.

V1 ->
V2 ->
V3 ->
V4 ->
V5 ->
V6 ->

Changes in V7:
* Rebased to the latest kernel 3.12-rc7
* Default idle routine to be called on POWERNV
is power7_idle() instead of HMT_low() routines.

Changes in V6:
* Made changes in Patch3: Generic POWER cpuidle driver in V5 by
breaking down to multiple patches, as there were multiple changes
including moving the file location.
* Remove MAX_IDLE_STATE macro and kernel command line for
IBM-POWER systems.

* Make backend driver a built-in, instead of a module.
As building this as a module is currently not possible.

* Generic backend driver minor cleanups.

* First two patches in V5 are not a part of the series, as
they are generic cleanups, already pushed into the tree.

Changes in V5:
* As per the discussions in the community, this patch series
enables cpuidle backend driver only for IBM-POWER
platforms. File is re-named from drivers/cpuidle/cpuidle-powerpc.c
to drivers/cpuidle/cpuildle-ibm-power.c
New back-end cpuidle driver is called IBM-POWER-Idle.

* General cleanups on the accessors front that was introduced in
previous version.

Changes in V4:
* This patch series includes generic backend driver cpuidle cleanups
including, replacing the driver and device initialisation
routines with cpuidle_register function.

* Enable CPUIDLE framework only for POWER and POWERNV platforms.

Changes in V3:
* This patch series does not include smt-snooze-delay fixes.
This will be taken up later on.

* Integrated POWERPC driver in drivers/cpuidle. Enabled for all of
POWERPC platform. Currently has PSERIES and POWERNV support.
No compile time flags in .c file. This will be one consolidated
binary that does a run time detection based on platform and take
decisions accordingly.

* Enabled CPUIDLE framwork for all of PPC64.

Changes in V2:
* Merged the backend driver posted out for powernv in V1 with
pSeries to create a single powerpc driver but this had compile
time flags.

Deepthi Dharwar (7):
pseries/cpuidle: Move processor_idle.c to drivers/cpuidle.
pseries/cpuidle: Use cpuidle_register() for initialisation.
pseries/cpuidle: Make pseries_idle backend driver a non-module.
pseries/cpuidle: Remove MAX_IDLE_STATE macro.
POWER/cpuidle: Generic POWER CPUIDLE driver supporting PSERIES.
POWER/cpuidle: Enable powernv cpuidle support.
powernv/cpuidle: Enable idle powernv cpu to call into the cpuidle framework.

arch/powerpc/include/asm/processor.h | 2
arch/powerpc/platforms/powernv/setup.c | 13 +
arch/powerpc/platforms/pseries/Kconfig | 9 -
arch/powerpc/platforms/pseries/Makefile | 1
arch/powerpc/platforms/pseries/processor_idle.c | 364 -----------------------
drivers/cpuidle/Kconfig | 5
drivers/cpuidle/Kconfig.powerpc | 10 +
drivers/cpuidle/Makefile | 4
drivers/cpuidle/cpuidle-ibm-power.c | 320 ++++++++++++++++++++
9 files changed, 352 insertions(+), 376 deletions(-)
delete mode 100644 arch/powerpc/platforms/pseries/processor_idle.c
create mode 100644 drivers/cpuidle/Kconfig.powerpc
create mode 100644 drivers/cpuidle/cpuidle-ibm-power.c

-- Deepthi

 \ /
  Last update: 2013-10-29 12:21    [from the cache]
©2003-2014 Jasper Spaans. hosted at Digital Ocean