lkml.org 
[lkml]   [2012]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCHv2 0/3] remoteproc: introduce rproc recovery
Date
These set of patches make possible the remoteproc recover after a crash.
This is a hard recovery, that means the remoteproc is reset and it will
start from the beginning. When a crash happen all the virtio devices are
destroyed. Therefore, both rpmsg drivers and devices are gracefully
removed which also cause rproc users become 0 and the remoteproc is turned
off. After the virtio devices are destroyed the crash handler function
will read the virtio information from the firmware in order to recreate
the virtio devices that will boot the remoteproc and everything will be
functional again.

-Version 2
* Wait untill there is no more rproc users before realoding the FW again
in order to make sure the recovery will work fine. As suggested by
Sjur BRENDELAND

Fernando Guzman Lugo (3):
remoteproc: add rproc_report_crash function to notify rproc crashes
remoteproc: recover a remoteproc when it has crashed
remoteproc: create debugfs entry to disable/enable recovery
dynamically

Documentation/remoteproc.txt | 7 ++
drivers/remoteproc/remoteproc_core.c | 116 ++++++++++++++++++++++++++++--
drivers/remoteproc/remoteproc_debugfs.c | 83 +++++++++++++++++++++
drivers/remoteproc/remoteproc_internal.h | 1 +
include/linux/remoteproc.h | 22 ++++++
5 files changed, 222 insertions(+), 7 deletions(-)



\
 
 \ /
  Last update: 2012-08-30 22:01    [W:0.078 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site