lkml.org 
[lkml]   [2012]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/1] driver-core: Shut up dev_dbg_reatelimited() without DEBUG
On 08/20/2012 02:14 PM, Hiroshi Doyu wrote:
> Hi Antti,
>
> Antti Palosaari <crope@iki.fi> wrote @ Sat, 18 Aug 2012 02:11:56 +0200:
>
>> On 08/17/2012 09:04 AM, Hiroshi Doyu wrote:
>>> dev_dbg_reatelimited() without DEBUG printed "217078 callbacks
>>> suppressed". This shouldn't print anything without DEBUG.
>>>
>>> Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
>>> Reported-by: Antti Palosaari <crope@iki.fi>
>>> ---
>>> include/linux/device.h | 6 +++++-
>>> 1 files changed, 5 insertions(+), 1 deletions(-)
>>>
>>> diff --git a/include/linux/device.h b/include/linux/device.h
>>> index eb945e1..d4dc26e 100644
>>> --- a/include/linux/device.h
>>> +++ b/include/linux/device.h
>>> @@ -962,9 +962,13 @@ do { \
>>> dev_level_ratelimited(dev_notice, dev, fmt, ##__VA_ARGS__)
>>> #define dev_info_ratelimited(dev, fmt, ...) \
>>> dev_level_ratelimited(dev_info, dev, fmt, ##__VA_ARGS__)
>>> +#if defined(DEBUG)
>>> #define dev_dbg_ratelimited(dev, fmt, ...) \
>>> dev_level_ratelimited(dev_dbg, dev, fmt, ##__VA_ARGS__)
>>> -
>>> +#else
>>> +#define dev_dbg_ratelimited(dev, fmt, ...) \
>>> + no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
>>> +#endif
>>> /*
>>> * Stupid hackaround for existing uses of non-printk uses dev_info
>>> *
>>>
>>
>> NACK. I don't think that's correct behavior. After that patch it kills
>> all output of dev_dbg_ratelimited(). If I use dynamic debugs and order
>> debugs, I expect to see debugs as earlier.
>
> You are right. I attached the update patch, just moving *_ratelimited
> functions after dev_dbg() definitions.
>
> With DEBUG defined/undefined in your "test.ko", it works fine. With
> CONFIG_DYNAMIC_DEBUG, it works with "+p", but with "-p", still
> "..callbacks suppressed" is printed.

I am using dynamic debugs and behavior is now just same as it was when
reported that bug. OK, likely for static debug it is now correct.

> $ insmod test.ko
> $ echo -n 'module test +p' > /sys/kernel/debug/dynamic_debug/control"
> $ rmmod test
> $ dmesg | tail -15
> <7>[ 69.047192] (NULL device *): print_dev_dbg_ratelimited: dev_dbg_ratelimited()
> <7>[ 69.047233] (NULL device *): print_dev_dbg_ratelimited: dev_dbg_ratelimited()
> <7>[ 69.047275] (NULL device *): print_dev_dbg_ratelimited: dev_dbg_ratelimited()
> <4>[ 75.057045] print_dev_dbg_ratelimited: 90 callbacks suppressed
> <7>[ 75.063595] (NULL device *): print_dev_dbg_ratelimited: dev_dbg_ratelimited()
> <7>[ 75.063796] (NULL device *): print_dev_dbg_ratelimited: dev_dbg_ratelimited()
> <7>[ 75.063970] (NULL device *): print_dev_dbg_ratelimited: dev_dbg_ratelimited()
> <7>[ 75.064137] (NULL device *): print_dev_dbg_ratelimited: dev_dbg_ratelimited()
> <7>[ 75.064307] (NULL device *): print_dev_dbg_ratelimited: dev_dbg_ratelimited()
> <7>[ 75.064472] (NULL device *): print_dev_dbg_ratelimited: dev_dbg_ratelimited()
> <7>[ 75.064640] (NULL device *): print_dev_dbg_ratelimited: dev_dbg_ratelimited()
> <7>[ 75.064806] (NULL device *): print_dev_dbg_ratelimited: dev_dbg_ratelimited()
> <7>[ 75.064972] (NULL device *): print_dev_dbg_ratelimited: dev_dbg_ratelimited()
> <7>[ 75.065137] (NULL device *): print_dev_dbg_ratelimited: dev_dbg_ratelimited()
> <6>[ 75.065510] test module unloaded!
>
> $ insmod test.ko
> $ echo -n 'module test -p' > /sys/kernel/debug/dynamic_debug/control"
> $ rmmod test
> $ dmesg
> ...
> <6>[ 82.715925] test module loaded!
> <6>[ 82.795642] dynamic_debug:ddebug_exec_queries: processed 1 queries, with 1 matches, 0 errs
> <4>[ 88.892096] print_dev_dbg_ratelimited: 90 callbacks suppressed
> <6>[ 88.898397] test module unloaded!
>
> Any suggestion to control "... callbacks suppressed" with
> CONFIG_DYNAMIC_DEBUG would be appreciated.

Is it Joe Perches who has added these Kernel dynamic pr_ and dev_
debugging? Maybe he has proper solution that fixes ratelimit for dynamic
debugging too.

regards
Antti

>
>>From 5b33751f89c2e91ee734325e6d73ed7e1c6d4b02 Mon Sep 17 00:00:00 2001
> From: Hiroshi Doyu <hdoyu@nvidia.com>
> Date: Mon, 20 Aug 2012 13:49:19 +0300
> Subject: [PATCH 1/1] driver-core: Shut up dev_dbg_reatelimited() without
> DEBUG
>
> dev_dbg_reatelimited() without DEBUG printed "217078 callbacks
> suppressed". This shouldn't print anything without DEBUG.
>
> With CONFIG_DYNAMIC_DEBUG, the print should be configured as expected.
>
> Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
> Reported-by: Antti Palosaari <crope@iki.fi>
> ---
> include/linux/device.h | 53 ++++++++++++++++++++++++++---------------------
> 1 files changed, 29 insertions(+), 24 deletions(-)
>
> diff --git a/include/linux/device.h b/include/linux/device.h
> index 9648331..763bca4 100644
> --- a/include/linux/device.h
> +++ b/include/linux/device.h
> @@ -932,6 +932,32 @@ int _dev_info(const struct device *dev, const char *fmt, ...)
>
> #endif
>
> +/*
> + * Stupid hackaround for existing uses of non-printk uses dev_info
> + *
> + * Note that the definition of dev_info below is actually _dev_info
> + * and a macro is used to avoid redefining dev_info
> + */
> +
> +#define dev_info(dev, fmt, arg...) _dev_info(dev, fmt, ##arg)
> +
> +#if defined(CONFIG_DYNAMIC_DEBUG)
> +#define dev_dbg(dev, format, ...) \
> +do { \
> + dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \
> +} while (0)
> +#elif defined(DEBUG)
> +#define dev_dbg(dev, format, arg...) \
> + dev_printk(KERN_DEBUG, dev, format, ##arg)
> +#else
> +#define dev_dbg(dev, format, arg...) \
> +({ \
> + if (0) \
> + dev_printk(KERN_DEBUG, dev, format, ##arg); \
> + 0; \
> +})
> +#endif
> +
> #define dev_level_ratelimited(dev_level, dev, fmt, ...) \
> do { \
> static DEFINE_RATELIMIT_STATE(_rs, \
> @@ -955,33 +981,12 @@ do { \
> dev_level_ratelimited(dev_notice, dev, fmt, ##__VA_ARGS__)
> #define dev_info_ratelimited(dev, fmt, ...) \
> dev_level_ratelimited(dev_info, dev, fmt, ##__VA_ARGS__)
> +#if defined(CONFIG_DYNAMIC_DEBUG) || defined(DEBUG)
> #define dev_dbg_ratelimited(dev, fmt, ...) \
> dev_level_ratelimited(dev_dbg, dev, fmt, ##__VA_ARGS__)
> -
> -/*
> - * Stupid hackaround for existing uses of non-printk uses dev_info
> - *
> - * Note that the definition of dev_info below is actually _dev_info
> - * and a macro is used to avoid redefining dev_info
> - */
> -
> -#define dev_info(dev, fmt, arg...) _dev_info(dev, fmt, ##arg)
> -
> -#if defined(CONFIG_DYNAMIC_DEBUG)
> -#define dev_dbg(dev, format, ...) \
> -do { \
> - dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \
> -} while (0)
> -#elif defined(DEBUG)
> -#define dev_dbg(dev, format, arg...) \
> - dev_printk(KERN_DEBUG, dev, format, ##arg)
> #else
> -#define dev_dbg(dev, format, arg...) \
> -({ \
> - if (0) \
> - dev_printk(KERN_DEBUG, dev, format, ##arg); \
> - 0; \
> -})
> +#define dev_dbg_ratelimited(dev, fmt, ...) \
> + no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
> #endif
>
> #ifdef VERBOSE_DEBUG
>


--
http://palosaari.fi/


\
 
 \ /
  Last update: 2012-08-21 00:01    [W:1.976 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site