lkml.org 
[lkml]   [2012]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectARM: s3c2410: remove dead mach-s3c2410 directory
From
Date
Commit 85fd6d63bf2927b9da7ab1b0d46723bfdb13808c ("ARM: S3C2410: move
mach-s3c2410/* into mach-s3c24xx/") orphaned
arch/arm/mach-s3c2410/Kconfig: currently no other Kconfig file sources
that file. This means that the Kconfig symbols S3C2410_CPUFREQ and
S3C2410_PLLTABLE will never be set, which in turns means that the macros
CONFIG_S3C2410_CPUFREQ and CONFIG_S3C2410_PLLTABLE will never be
defined.

All this makes that all four files in the mach-directory (Kconfig,
Makefile, cpu-freq.c, and pll.c) are effectively dead files since v3.4:
none of them can lead to any code in someones kernel. This directory can
safely be removed.

Also delete two lines from mach-s3c24xx/Kconfig that now also become
meaningless.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
---
0) Tested only with a number of git commands.

1) Previously discussed in https://lkml.org/lkml/2012/4/22/26 .

arch/arm/mach-s3c2410/Kconfig | 20 -----
arch/arm/mach-s3c2410/Makefile | 14 ---
arch/arm/mach-s3c2410/cpu-freq.c | 163 --------------------------------------
arch/arm/mach-s3c2410/pll.c | 99 -----------------------
arch/arm/mach-s3c24xx/Kconfig | 2 -
5 files changed, 0 insertions(+), 298 deletions(-)
delete mode 100644 arch/arm/mach-s3c2410/Kconfig
delete mode 100644 arch/arm/mach-s3c2410/Makefile
delete mode 100644 arch/arm/mach-s3c2410/cpu-freq.c
delete mode 100644 arch/arm/mach-s3c2410/pll.c

diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
deleted file mode 100644
index 68d89cb..0000000
--- a/arch/arm/mach-s3c2410/Kconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-# cpu frequency scaling support
-
-config S3C2410_CPUFREQ
- bool
- depends on CPU_FREQ_S3C24XX && CPU_S3C2410
- select S3C2410_CPUFREQ_UTILS
- help
- CPU Frequency scaling support for S3C2410
-
-config S3C2410_PLLTABLE
- bool
- depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
- default y
- help
- Select the PLL table for the S3C2410
-
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
deleted file mode 100644
index 6b9a316..0000000
--- a/arch/arm/mach-s3c2410/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-# arch/arm/mach-s3c2410/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-obj-$(CONFIG_S3C2410_CPUFREQ) += cpu-freq.o
-obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o
-
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c
deleted file mode 100644
index 5404535..0000000
--- a/arch/arm/mach-s3c2410/cpu-freq.c
+++ /dev/null
@@ -1,163 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/cpu-freq.c
- *
- * Copyright (c) 2006-2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 CPU Frequency scaling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/cpu-freq-core.h>
-
-/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */
-
-static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
-{
- u32 clkdiv = 0;
-
- if (cfg->divs.h_divisor == 2)
- clkdiv |= S3C2410_CLKDIVN_HDIVN;
-
- if (cfg->divs.p_divisor != cfg->divs.h_divisor)
- clkdiv |= S3C2410_CLKDIVN_PDIVN;
-
- __raw_writel(clkdiv, S3C2410_CLKDIVN);
-}
-
-static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
-{
- unsigned long hclk, fclk, pclk;
- unsigned int hdiv, pdiv;
- unsigned long hclk_max;
-
- fclk = cfg->freq.fclk;
- hclk_max = cfg->max.hclk;
-
- cfg->freq.armclk = fclk;
-
- s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n",
- __func__, fclk, hclk_max);
-
- hdiv = (fclk > cfg->max.hclk) ? 2 : 1;
- hclk = fclk / hdiv;
-
- if (hclk > cfg->max.hclk) {
- s3c_freq_dbg("%s: hclk too big\n", __func__);
- return -EINVAL;
- }
-
- pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
- pclk = hclk / pdiv;
-
- if (pclk > cfg->max.pclk) {
- s3c_freq_dbg("%s: pclk too big\n", __func__);
- return -EINVAL;
- }
-
- pdiv *= hdiv;
-
- /* record the result */
- cfg->divs.p_divisor = pdiv;
- cfg->divs.h_divisor = hdiv;
-
- return 0 ;
-}
-
-static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
- .max = {
- .fclk = 200000000,
- .hclk = 100000000,
- .pclk = 50000000,
- },
-
- /* transition latency is about 5ms worst-case, so
- * set 10ms to be sure */
- .latency = 10000000,
-
- .locktime_m = 150,
- .locktime_u = 150,
- .locktime_bits = 12,
-
- .need_pll = 1,
-
- .name = "s3c2410",
- .calc_iotiming = s3c2410_iotiming_calc,
- .set_iotiming = s3c2410_iotiming_set,
- .get_iotiming = s3c2410_iotiming_get,
- .resume_clocks = s3c2410_setup_clocks,
-
- .set_fvco = s3c2410_set_fvco,
- .set_refresh = s3c2410_cpufreq_setrefresh,
- .set_divs = s3c2410_cpufreq_setdivs,
- .calc_divs = s3c2410_cpufreq_calcdivs,
-
- .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
-};
-
-static int s3c2410_cpufreq_add(struct device *dev,
- struct subsys_interface *sif)
-{
- return s3c_cpufreq_register(&s3c2410_cpufreq_info);
-}
-
-static struct subsys_interface s3c2410_cpufreq_interface = {
- .name = "s3c2410_cpufreq",
- .subsys = &s3c2410_subsys,
- .add_dev = s3c2410_cpufreq_add,
-};
-
-static int __init s3c2410_cpufreq_init(void)
-{
- return subsys_interface_register(&s3c2410_cpufreq_interface);
-}
-
-arch_initcall(s3c2410_cpufreq_init);
-
-static int s3c2410a_cpufreq_add(struct device *dev,
- struct subsys_interface *sif)
-{
- /* alter the maximum freq settings for S3C2410A. If a board knows
- * it only has a maximum of 200, then it should register its own
- * limits. */
-
- s3c2410_cpufreq_info.max.fclk = 266000000;
- s3c2410_cpufreq_info.max.hclk = 133000000;
- s3c2410_cpufreq_info.max.pclk = 66500000;
- s3c2410_cpufreq_info.name = "s3c2410a";
-
- return s3c2410_cpufreq_add(dev, sif);
-}
-
-static struct subsys_interface s3c2410a_cpufreq_interface = {
- .name = "s3c2410a_cpufreq",
- .subsys = &s3c2410a_subsys,
- .add_dev = s3c2410a_cpufreq_add,
-};
-
-static int __init s3c2410a_cpufreq_init(void)
-{
- return subsys_interface_register(&s3c2410a_cpufreq_interface);
-}
-
-arch_initcall(s3c2410a_cpufreq_init);
diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c
deleted file mode 100644
index e0b3b34..0000000
--- a/arch/arm/mach-s3c2410/pll.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/* arch/arm/mach-s3c2410/pll.c
- *
- * Copyright (c) 2006-2007 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- * Vincent Sanders <vince@arm.linux.org.uk>
- *
- * S3C2410 CPU PLL tables
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <plat/cpu.h>
-#include <plat/cpu-freq-core.h>
-
-static struct cpufreq_frequency_table pll_vals_12MHz[] = {
- { .frequency = 34000000, .index = PLLVAL(82, 2, 3), },
- { .frequency = 45000000, .index = PLLVAL(82, 1, 3), },
- { .frequency = 51000000, .index = PLLVAL(161, 3, 3), },
- { .frequency = 48000000, .index = PLLVAL(120, 2, 3), },
- { .frequency = 56000000, .index = PLLVAL(142, 2, 3), },
- { .frequency = 68000000, .index = PLLVAL(82, 2, 2), },
- { .frequency = 79000000, .index = PLLVAL(71, 1, 2), },
- { .frequency = 85000000, .index = PLLVAL(105, 2, 2), },
- { .frequency = 90000000, .index = PLLVAL(112, 2, 2), },
- { .frequency = 101000000, .index = PLLVAL(127, 2, 2), },
- { .frequency = 113000000, .index = PLLVAL(105, 1, 2), },
- { .frequency = 118000000, .index = PLLVAL(150, 2, 2), },
- { .frequency = 124000000, .index = PLLVAL(116, 1, 2), },
- { .frequency = 135000000, .index = PLLVAL(82, 2, 1), },
- { .frequency = 147000000, .index = PLLVAL(90, 2, 1), },
- { .frequency = 152000000, .index = PLLVAL(68, 1, 1), },
- { .frequency = 158000000, .index = PLLVAL(71, 1, 1), },
- { .frequency = 170000000, .index = PLLVAL(77, 1, 1), },
- { .frequency = 180000000, .index = PLLVAL(82, 1, 1), },
- { .frequency = 186000000, .index = PLLVAL(85, 1, 1), },
- { .frequency = 192000000, .index = PLLVAL(88, 1, 1), },
- { .frequency = 203000000, .index = PLLVAL(161, 3, 1), },
-
- /* 2410A extras */
-
- { .frequency = 210000000, .index = PLLVAL(132, 2, 1), },
- { .frequency = 226000000, .index = PLLVAL(105, 1, 1), },
- { .frequency = 266000000, .index = PLLVAL(125, 1, 1), },
- { .frequency = 268000000, .index = PLLVAL(126, 1, 1), },
- { .frequency = 270000000, .index = PLLVAL(127, 1, 1), },
-};
-
-static int s3c2410_plls_add(struct device *dev, struct subsys_interface *sif)
-{
- return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz));
-}
-
-static struct subsys_interface s3c2410_plls_interface = {
- .name = "s3c2410_plls",
- .subsys = &s3c2410_subsys,
- .add_dev = s3c2410_plls_add,
-};
-
-static int __init s3c2410_pll_init(void)
-{
- return subsys_interface_register(&s3c2410_plls_interface);
-
-}
-
-arch_initcall(s3c2410_pll_init);
-
-static struct subsys_interface s3c2410a_plls_interface = {
- .name = "s3c2410a_plls",
- .subsys = &s3c2410a_subsys,
- .add_dev = s3c2410_plls_add,
-};
-
-static int __init s3c2410a_pll_init(void)
-{
- return subsys_interface_register(&s3c2410a_plls_interface);
-}
-
-arch_initcall(s3c2410a_pll_init);
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index e249611..8f0592a 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -20,7 +20,6 @@ config CPU_S3C2410
select S3C2410_CLOCK
select CPU_LLSERIAL_S3C2410
select S3C2410_PM if PM
- select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
help
Support for S3C2410 and S3C2410A family from the S3C24XX line
of Samsung Mobile CPUs.
@@ -156,7 +155,6 @@ config MACH_AML_M5900

config ARCH_BAST
bool "Simtec Electronics BAST (EB2410ITX)"
- select S3C2410_IOTIMING if S3C2410_CPUFREQ
select S3C24XX_SIMTEC_PM if PM
select S3C24XX_SIMTEC_NOR
select S3C24XX_SIMTEC_USB
--
1.7.7.6


\
 
 \ /
  Last update: 2012-06-25 13:01    [W:0.054 / U:0.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site