[lkml]   [2012]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[ 13/78] mtd: sst25l: initialize writebufsize
3.3-stable review patch.  If anyone has any objections, please let me know.


From: Artem Bityutskiy <>

commit c4cc625ea5958d065c21cc0fcea29e9ed8f3d2bc upstream.

The writebufsize concept was introduce by commit
"0e4ca7e mtd: add writebufsize field to mtd_info struct" and it represents
the maximum amount of data the device writes to the media at a time. This is
an important parameter for UBIFS which is used during recovery and which
basically defines how big a corruption caused by a power cut can be.

Set writebufsize to the flash page size because it is the maximum amount of
data it writes at a time.

Signed-off-by: Artem Bityutskiy <>
Signed-off-by: David Woodhouse <>
Signed-off-by: Greg Kroah-Hartman <>

drivers/mtd/devices/sst25l.c | 1 +
1 file changed, 1 insertion(+)

--- a/drivers/mtd/devices/sst25l.c
+++ b/drivers/mtd/devices/sst25l.c
@@ -402,6 +402,7 @@ static int __devinit sst25l_probe(struct
flash->mtd.flags = MTD_CAP_NORFLASH;
flash->mtd.erasesize = flash_info->erase_size;
flash->mtd.writesize = flash_info->page_size;
+ flash->mtd.writebufsize = flash_info->page_size;
flash->mtd.size = flash_info->page_size * flash_info->nr_pages;
flash->mtd.erase = sst25l_erase;
flash-> = sst25l_read;

 \ /
  Last update: 2012-04-12 01:17    [W:0.252 / U:0.328 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site