lkml.org 
[lkml]   [2012]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRE: [PATCH 2/4] leds-lp5521: add 'update_config' in the lp5521_platform_data
Add Arun, Srinidhi, Linus and Andrew on CC

> -----Original Message-----
> From: Kim, Milo
> Sent: Sunday, January 22, 2012 3:10 AM
> To: 'linux-kernel@vger.kernel.org'; 'rpurdie@rpsys.net'
> Subject: [PATCH 2/4] leds-lp5521: add 'update_config' in the
> lp5521_platform_data
>
> The value of CONFIG register(Addr 08h) is configurable.
> For supporting this feature, update_config is added in the platform
> data.
> If 'update_config' is not defined, the default value is
> 'LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT'.
>
> To define CONFIG register in the platform data, the bit definitions
> were moved
> to the header file.
>
> Documentation updated : description about 'update_config' and example.
>
> Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
> ---
> Documentation/leds/leds-lp5521.txt | 19 +++++++++++++++++++
> drivers/leds/leds-lp5521.c | 19 ++++---------------
> include/linux/leds-lp5521.h | 13 +++++++++++++
> 3 files changed, 36 insertions(+), 15 deletions(-)
>
> diff --git a/Documentation/leds/leds-lp5521.txt
> b/Documentation/leds/leds-lp5521.txt
> index f48ab75..e3c66c6 100644
> --- a/Documentation/leds/leds-lp5521.txt
> +++ b/Documentation/leds/leds-lp5521.txt
> @@ -92,3 +92,22 @@ static struct lp5521_platform_data
> lp5521_platform_data = {
>
> If the current is set to 0 in the platform data, that channel is
> disabled and it is not visible in the sysfs.
> +
> +The 'update_config' : CONFIG register (ADDR 08h)
> +This value is platform-specific data.
> +If update_config is not defined, the CONFIG register is set with
> +'LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT'.
> +(Enable auto-powersave, set charge pump to auto, red to battery)
> +
> +example of update_config :
> +
> +#define LP5521_CONFIGS (LP5521_PWM_HF | LP5521_PWRSAVE_EN | \
> + LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT | \
> + LP5521_CLK_INT)
> +
> +static struct lp5521_platform_data lp5521_pdata = {
> + .led_config = lp5521_led_config,
> + .num_channels = ARRAY_SIZE(lp5521_led_config),
> + .clock_mode = LP5521_CLOCK_INT,
> + .update_config = LP5521_CONFIGS,
> +};
> diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
> index c0e7c10..4fa792d 100644
> --- a/drivers/leds/leds-lp5521.c
> +++ b/drivers/leds/leds-lp5521.c
> @@ -82,18 +82,6 @@
> #define LP5521_LOGARITHMIC_PWM 0x80 /* Logarithmic PWM
> adjustment */
> #define LP5521_EXEC_RUN 0x2A
>
> -/* Bits in CONFIG register */
> -#define LP5521_PWM_HF 0x40 /* PWM: 0 = 256Hz, 1 = 558Hz
> */
> -#define LP5521_PWRSAVE_EN 0x20 /* 1 = Power save mode */
> -#define LP5521_CP_MODE_OFF 0 /* Charge pump (CP) off */
> -#define LP5521_CP_MODE_BYPASS 8 /* CP forced to bypass
> mode */
> -#define LP5521_CP_MODE_1X5 0x10 /* CP forced to 1.5x mode */
> -#define LP5521_CP_MODE_AUTO 0x18 /* Automatic mode selection
> */
> -#define LP5521_R_TO_BATT 4 /* R out: 0 = CP, 1 = Vbat */
> -#define LP5521_CLK_SRC_EXT 0 /* Ext-clk source (CLK_32K)
> */
> -#define LP5521_CLK_INT 1 /* Internal clock */
> -#define LP5521_CLK_AUTO 2 /* Automatic clock
> selection */
> -
> /* Status */
> #define LP5521_EXT_CLK_USED 0x08
>
> @@ -238,15 +226,16 @@ static int lp5521_configure(struct i2c_client
> *client)
> {
> struct lp5521_chip *chip = i2c_get_clientdata(client);
> int ret;
> + u8 cfg;
>
> lp5521_init_engine(chip);
>
> /* Set all PWMs to direct control mode */
> ret = lp5521_write(client, LP5521_REG_OP_MODE, 0x3F);
>
> - /* Enable auto-powersave, set charge pump to auto, red to battery
> */
> - ret |= lp5521_write(client, LP5521_REG_CONFIG,
> - LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT);
> + cfg = chip->pdata->update_config ?
> + : (LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO |
> LP5521_R_TO_BATT);
> + ret |= lp5521_write(client, LP5521_REG_CONFIG, cfg);
>
> /* Initialize all channels PWM to zero -> leds off */
> ret |= lp5521_write(client, LP5521_REG_R_PWM, 0);
> diff --git a/include/linux/leds-lp5521.h b/include/linux/leds-lp5521.h
> index e675b8d..e9ab583 100644
> --- a/include/linux/leds-lp5521.h
> +++ b/include/linux/leds-lp5521.h
> @@ -36,6 +36,18 @@ struct lp5521_led_config {
> #define LP5521_CLOCK_INT 1
> #define LP5521_CLOCK_EXT 2
>
> +/* Bits in CONFIG register */
> +#define LP5521_PWM_HF 0x40 /* PWM: 0 = 256Hz, 1 = 558Hz
> */
> +#define LP5521_PWRSAVE_EN 0x20 /* 1 = Power save mode */
> +#define LP5521_CP_MODE_OFF 0 /* Charge pump (CP) off */
> +#define LP5521_CP_MODE_BYPASS 8 /* CP forced to bypass
> mode */
> +#define LP5521_CP_MODE_1X5 0x10 /* CP forced to 1.5x mode */
> +#define LP5521_CP_MODE_AUTO 0x18 /* Automatic mode selection
> */
> +#define LP5521_R_TO_BATT 4 /* R out: 0 = CP, 1 = Vbat */
> +#define LP5521_CLK_SRC_EXT 0 /* Ext-clk source (CLK_32K)
> */
> +#define LP5521_CLK_INT 1 /* Internal clock */
> +#define LP5521_CLK_AUTO 2 /* Automatic clock
> selection */
> +
> struct lp5521_platform_data {
> struct lp5521_led_config *led_config;
> u8 num_channels;
> @@ -44,6 +56,7 @@ struct lp5521_platform_data {
> void (*release_resources)(void);
> void (*enable)(bool state);
> const char *label;
> + u8 update_config;
> };
>
> #endif /* __LINUX_LP5521_H */
> --
> 1.7.4.1
>
>
> Best Regards,
> Milo (Woogyom) Kim
> Texas Instruments Incorporated




\
 
 \ /
  Last update: 2012-01-27 03:25    [W:0.041 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site