lkml.org 
[lkml]   [2011]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectProblem with ide-cs
With kernel 3.0, my external hard drive attached to a PCMCIA card reports "irq 
11: nobody cared (try booting with the "irqpoll" option)". The driver in
question is ide-cs. When I try irqpoll, the device works correctly. Naturally,
the interrupt is shared with yenta, the PCMCIA adapter driver. In addition, that
same interrupt is used by a BCM4318 Cardbus device.

I plan on preparing a Bugzilla entry for this problem, but I'm not quite ready.
What I would like to know if there is any documentation on what kinds of changes
are needed to fix the problem.

Thanks,

Larry


\
 
 \ /
  Last update: 2011-07-30 06:17    [W:1.562 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site