lkml.org 
[lkml]   [2011]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCHv1 -next] HWMON: HWMON module of DA9052 PMIC driver
Hi,

HWMON Driver for Dialog Semiconductor DA9052 PMICs.

Changes made since last submission:
. Changed the return format for charging current, bat temperature
and junction temperature
. conversion of temperature to mill degree

Signed-off-by: D. Chen <dchen@diasemi.com>
---

diff -Naur linux-next-20110421.orig/Documentation/hwmon/da9052 linux-next-20110421/Documentation/hwmon/da9052
--- linux-next-20110421.orig/Documentation/hwmon/da9052 1970-01-01 05:00:00.000000000 +0500
+++ linux-next-20110421/Documentation/hwmon/da9052 2011-04-26 14:58:54.000000000 +0500
@@ -0,0 +1,54 @@
+Kernel driver da9052-hwmon
+==========================
+
+Supported chips:
+ * Dialog Semiconductors DA9052 PMICs
+ Prefix: 'da9052'
+ Datasheet: Kindly visit www.dialog-semiconductor.com and request for the
+ official datasheet.
+
+Authors: David Dajun Chen <dchen@diasemi.com>
+
+Description
+-----------
+
+The DA9052 provides an Analogue to Digital Converter (ADC) with 10 bits
+resolution and track and hold circuitry combined with an analogue input
+multiplexer. The analogue input multiplexer will allow conversion of up to 10
+different inputs. The track and hold circuit ensures stable input voltages at
+the input of the ADC during the conversion.
+
+The ADC is used to measure the following inputs:
+Channel 0: VDDOUT - measurement of the system voltage
+Channel 1: ICH - internal battery charger current measurement
+Channel 2: TBAT - output from the battery NTC
+Channel 3: VBAT - measurement of the battery voltage
+Channel 4: ADC_IN4 - high impedance input (0 - 2.5V)
+Channel 5: ADC_IN5 - high impedance input (0 - 2.5V)
+Channel 6: ADC_IN6 - high impedance input (0 - 2.5V)
+Channel 7: XY - TSI interface to measure the X and Y voltage of the touch
+screen resistive potentiometers
+Channel 8: Internal Tjunc. - sense (internal temp. sensor)
+Channel 9: VBBAT - measurement of the backup battery voltage
+
+By using sysfs attributes we can measure the system voltage VDDOUT, the battery
+charging current ICH, battery temperature TBAT, battery junction temperature
+TJUNC, battery voltage VBAT and the back up battery voltage VBBAT.
+
+Voltage Monitoring
+------------------
+
+Voltages are sampled by a 10 bit ADC. Voltages in millivolts are 1.465
+times the ADC value.
+
+Temperature Monitoring
+----------------------
+
+Temperatures are sampled by a 10 bit ADC. Chip and battery temperatures
+are available. The chip temperature is calculated as:
+
+ Degrees celsius = (512.18 - data) / 1.0983
+
+while the battery temperature calculation will depend on the NTC
+thermistor component.
+
diff -Naur linux-next-20110421.orig/drivers/hwmon/da9052-hwmon.c linux-next-20110421/drivers/hwmon/da9052-hwmon.c
--- linux-next-20110421.orig/drivers/hwmon/da9052-hwmon.c 1970-01-01 05:00:00.000000000 +0500
+++ linux-next-20110421/drivers/hwmon/da9052-hwmon.c 2011-04-26 14:16:50.000000000 +0500
@@ -0,0 +1,329 @@
+/*
+ * HWMON Driver for Dialog DA9052
+ *
+ * Copyright(c) 2009 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/hwmon.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/da9052/da9052.h>
+#include <linux/mfd/da9052/reg.h>
+
+#define DA9052_ADC_CHANNELS(id, func_name, name)\
+ static SENSOR_DEVICE_ATTR(in##id##_label, S_IRUGO, show_label,\
+ NULL, name);\
+ static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, func_name,\
+ NULL, name)
+
+struct da9052_hwmon {
+ struct da9052 *da9052;
+ struct device *class_device;
+ struct mutex hwmon_lock;
+};
+
+static const char *input_names[] = {
+ [DA9052_ADC_VDDOUT] = "VDDOUT",
+ [DA9052_ADC_ICH] = "CHARGING CURRENT",
+ [DA9052_ADC_TBAT] = "BATTERY TEMP",
+ [DA9052_ADC_VBAT] = "BATTERY VOLTAGE",
+ [DA9052_ADC_IN4] = "ADC IN4",
+ [DA9052_ADC_IN5] = "ADC IN5",
+ [DA9052_ADC_IN6] = "ADC IN6",
+ [DA9052_ADC_TJUNC] = "BATTERY JUNCTION TEMP",
+ [DA9052_ADC_VBBAT] = "BACK-UP BATTERY VOLTAGE",
+};
+
+static int da9052_enable_vddout_channel(struct da9052 *da9052)
+{
+ int ret;
+
+ ret = da9052_reg_read(da9052, DA9052_ADC_CONT_REG);
+ if (ret < 0)
+ return ret;
+
+ ret |= DA9052_ADCCONT_AUTOVDDEN;
+ return da9052_reg_write(da9052, DA9052_ADC_CONT_REG, ret);
+}
+
+static int da9052_disable_vddout_channel(struct da9052 *da9052)
+{
+ int ret;
+
+ ret = da9052_reg_read(da9052, DA9052_ADC_CONT_REG);
+ if (ret < 0)
+ return ret;
+
+ ret &= ~DA9052_ADCCONT_AUTOVDDEN;
+ return da9052_reg_write(da9052, DA9052_ADC_CONT_REG, ret);
+
+}
+
+static ssize_t da9052_read_vddout(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct da9052_hwmon *hwmon = dev_get_drvdata(dev);
+ int ret = -EIO;
+
+ mutex_lock(&hwmon->hwmon_lock);
+
+ ret = da9052_enable_vddout_channel(hwmon->da9052);
+ if (ret < 0)
+ goto hwmon_err;
+
+ ret = da9052_reg_read(hwmon->da9052, DA9052_VDD_RES_REG);
+ if (ret < 0)
+ goto hwmon_err;
+
+ ret = da9052_disable_vddout_channel(hwmon->da9052);
+ if (ret < 0)
+ goto hwmon_err;
+
+ mutex_unlock(&hwmon->hwmon_lock);
+ return sprintf(buf, "%u\n", ret);
+
+hwmon_err:
+ mutex_unlock(&hwmon->hwmon_lock);
+ return ret;
+}
+
+static ssize_t da9052_read_ich(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct da9052_hwmon *hwmon = dev_get_drvdata(dev);
+ int ret;
+
+ ret = da9052_reg_read(hwmon->da9052, DA9052_ICHG_AV_REG);
+ if (ret < 0)
+ return ret;
+
+ /* Equivalent to 3.9mA/bit in register ICHG_AV */
+ ret = DIV_ROUND_CLOSEST(ret * 39, 10);
+ return sprintf(buf, "%d\n", ret);
+}
+
+static ssize_t da9052_read_tbat(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct da9052_hwmon *hwmon = dev_get_drvdata(dev);
+ int ret;
+
+ ret = da9052_reg_read(hwmon->da9052, DA9052_TBAT_RES_REG);
+ if (ret < 0)
+ return ret;
+
+ /* Degrees celsius = (512.18-ret) / 1.0983 */
+ ret = 512180 - (ret * 1000);
+ ret = DIV_ROUND_CLOSEST(ret * 10000, 10983);
+ return sprintf(buf, "%d\n", ret);
+}
+
+static ssize_t da9052_read_vbat(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct da9052_hwmon *hwmon = dev_get_drvdata(dev);
+ int ret;
+
+ ret = da9052_adc_manual_read(hwmon->da9052, DA9052_ADC_VBAT);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%u\n", ret);
+}
+
+static ssize_t da9052_read_misc_channel(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct da9052_hwmon *hwmon = dev_get_drvdata(dev);
+ int channel = to_sensor_dev_attr(devattr)->index;
+ int ret;
+
+ ret = da9052_adc_manual_read(hwmon->da9052, channel);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%u\n", ret);
+}
+
+static ssize_t da9052_read_tjunc(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct da9052_hwmon *hwmon = dev_get_drvdata(dev);
+ int temp;
+ int ret;
+
+ ret = da9052_reg_read(hwmon->da9052, DA9052_TJUNC_RES_REG);
+ if (ret < 0)
+ return ret;
+
+ temp = ret;
+
+ ret = da9052_reg_read(hwmon->da9052, DA9052_T_OFFSET_REG);
+ if (ret < 0)
+ return ret;
+
+ /* Degrees celsius = 1.708 * (TJUNC_RES - T_OFFSET) - 108.8 */
+ ret = 1708 * (temp - ret) - 108800;
+ return sprintf(buf, "%d\n", ret);
+}
+
+static ssize_t da9052_read_vbbat(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct da9052_hwmon *hwmon = dev_get_drvdata(dev);
+ int ret;
+
+ ret = da9052_adc_manual_read(hwmon->da9052, DA9052_ADC_VBBAT);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%u\n", ret);
+
+}
+
+static ssize_t da9052_hwmon_show_name(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ return sprintf(buf, "da9052-hwmon\n");
+}
+
+static ssize_t show_label(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ return sprintf(buf, "%s\n", input_names[to_sensor_dev_attr(devattr)->index]);
+}
+
+DA9052_ADC_CHANNELS(0, da9052_read_vddout, DA9052_ADC_VDDOUT);
+DA9052_ADC_CHANNELS(3, da9052_read_vbat, DA9052_ADC_VBAT);
+DA9052_ADC_CHANNELS(4, da9052_read_misc_channel, DA9052_ADC_IN4);
+DA9052_ADC_CHANNELS(5, da9052_read_misc_channel, DA9052_ADC_IN5);
+DA9052_ADC_CHANNELS(6, da9052_read_misc_channel, DA9052_ADC_IN6);
+DA9052_ADC_CHANNELS(9, da9052_read_vbbat, DA9052_ADC_VBBAT);
+static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, da9052_read_ich, NULL,
+ DA9052_ADC_ICH);
+static SENSOR_DEVICE_ATTR(curr1_label, S_IRUGO, show_label, NULL,
+ DA9052_ADC_TJUNC);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, da9052_read_tbat, NULL,
+ DA9052_ADC_TBAT);
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL,
+ DA9052_ADC_TBAT);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, da9052_read_tjunc, NULL,
+ DA9052_ADC_TJUNC);
+static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_label, NULL,
+ DA9052_ADC_TJUNC);
+
+static DEVICE_ATTR(name, S_IRUGO, da9052_hwmon_show_name, NULL);
+
+static struct attribute *da9052_attr[] = {
+ &dev_attr_name.attr,
+
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in0_label.dev_attr.attr,
+ &sensor_dev_attr_curr1_input.dev_attr.attr,
+ &sensor_dev_attr_curr1_label.dev_attr.attr,
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_label.dev_attr.attr,
+ &sensor_dev_attr_in3_input.dev_attr.attr,
+ &sensor_dev_attr_in3_label.dev_attr.attr,
+ &sensor_dev_attr_in4_input.dev_attr.attr,
+ &sensor_dev_attr_in4_label.dev_attr.attr,
+ &sensor_dev_attr_in5_input.dev_attr.attr,
+ &sensor_dev_attr_in5_label.dev_attr.attr,
+ &sensor_dev_attr_in6_input.dev_attr.attr,
+ &sensor_dev_attr_in6_label.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_label.dev_attr.attr,
+ &sensor_dev_attr_in9_input.dev_attr.attr,
+ &sensor_dev_attr_in9_label.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group da9052_attr_group = {.attrs = da9052_attr};
+
+static int __init da9052_hwmon_probe(struct platform_device *pdev)
+{
+ struct da9052_hwmon *hwmon;
+ int ret;
+
+ hwmon = kzalloc(sizeof(struct da9052_hwmon), GFP_KERNEL);
+ if (!hwmon)
+ return -ENOMEM;
+
+ mutex_init(&hwmon->hwmon_lock);
+ hwmon->da9052 = dev_get_drvdata(pdev->dev.parent);
+
+ platform_set_drvdata(pdev, hwmon);
+
+ hwmon->class_device = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(hwmon->class_device)) {
+ ret = PTR_ERR(hwmon->class_device);
+ goto err_mem;
+ }
+
+ ret = sysfs_create_group(&pdev->dev.kobj, &da9052_attr_group);
+ if (ret)
+ goto err_sysfs;
+
+ return 0;
+
+err_sysfs:
+ hwmon_device_unregister(hwmon->class_device);
+err_mem:
+ kfree(hwmon);
+ return ret;
+}
+
+static int __devexit da9052_hwmon_remove(struct platform_device *pdev)
+{
+ struct da9052_hwmon *hwmon = platform_get_drvdata(pdev);
+
+ mutex_destroy(&hwmon->hwmon_lock);
+ hwmon_device_unregister(hwmon->class_device);
+ sysfs_remove_group(&pdev->dev.kobj, &da9052_attr_group);
+ kfree(hwmon);
+
+ return 0;
+}
+
+static struct platform_driver da9052_hwmon_driver = {
+ .driver = {
+ .name = "da9052-hwmon",
+ .owner = THIS_MODULE,
+ },
+ .probe = da9052_hwmon_probe,
+ .remove = __devexit_p(da9052_hwmon_remove),
+
+};
+
+static int __init da9052_hwmon_init(void)
+{
+
+ return platform_driver_register(&da9052_hwmon_driver);
+}
+module_init(da9052_hwmon_init);
+
+static void __exit da9052_hwmon_exit(void)
+{
+ platform_driver_unregister(&da9052_hwmon_driver);
+}
+module_exit(da9052_hwmon_exit);
+
+MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
+MODULE_DESCRIPTION("DA9052 ADC driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:da9052-hwmon");
diff -Naur linux-next-20110421.orig/drivers/hwmon/Kconfig linux-next-20110421/drivers/hwmon/Kconfig
--- linux-next-20110421.orig/drivers/hwmon/Kconfig 2011-04-26 09:31:34.000000000 +0500
+++ linux-next-20110421/drivers/hwmon/Kconfig 2011-04-26 14:27:08.000000000 +0500
@@ -303,6 +303,16 @@
This driver can also be built as a module. If so, the module
will be called ds1621.

+config SENSORS_DA9052_ADC
+ tristate "Dialog DA9052 HWMON"
+ depends on PMIC_DA9052
+ help
+ Say y here to support the ADC found on
+ Dialog Semiconductor DA9052 PMIC.
+
+ This driver can also be built as module. If so, the module
+ will be called da9052-hwmon.
+
config SENSORS_I5K_AMB
tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
depends on PCI && EXPERIMENTAL
diff -Naur linux-next-20110421.orig/drivers/hwmon/Makefile linux-next-20110421/drivers/hwmon/Makefile
--- linux-next-20110421.orig/drivers/hwmon/Makefile 2011-04-26 09:31:34.000000000 +0500
+++ linux-next-20110421/drivers/hwmon/Makefile 2011-04-26 14:24:49.000000000 +0500
@@ -41,6 +41,7 @@
obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o
obj-$(CONFIG_SENSORS_PKGTEMP) += pkgtemp.o
+obj-$(CONFIG_SENSORS_DA9052_ADC) += da9052-hwmon.o
obj-$(CONFIG_SENSORS_DME1737) += dme1737.o
obj-$(CONFIG_SENSORS_DS620) += ds620.o
obj-$(CONFIG_SENSORS_DS1621) += ds1621.o


Regards,
Ashish


\
 
 \ /
  Last update: 2011-04-26 13:39    [W:0.061 / U:0.008 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site