lkml.org 
[lkml]   [2011]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib
On 4/17/2011 2:37 PM, Linus Walleij wrote:
> From: Linus Walleij<linus.walleij@linaro.org>
>
> This adds two functions for struct gpio_chip chips to provide pin
> bias and drive mode settings for individual pins. Implementers does
> this a bit differently and usually there are a few possible modes you
> can select, I'm providing a few common modes for biasing and driving
> pins.
>
> Since we have no previous hacked-up arch-specific drivers for this
> we can avoid any __override_functions and we just allow this to be
> properly implemented using gpiolib. Further the function is made
> non-mandatory, if it is not defined for the chip it will be silently
> ignored.
This is a great start for something that the msm tree has been doing
internally through its gpiomux architecture.
Currently, msm has to configure a the pinmux in addition to the drive
and the bias, so we would like to make this more powerful to support
different gpio parameters. This has been mentioned previously - but a
way to define a custom config and set and get its parameters seems like
a more extensible model.

> Signed-off-by: Linus Walleij<linus.walleij@linaro.org>
> ---
> drivers/gpio/gpiolib.c | 43 ++++++++++++++++++++++++++++++++++++++
> include/asm-generic/gpio.h | 12 ++++++++++
> include/linux/gpio.h | 49 ++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 104 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
> index 36a2974..f79f4a3 100644
> --- a/drivers/gpio/gpiolib.c
> +++ b/drivers/gpio/gpiolib.c
> @@ -1573,6 +1573,49 @@ void __gpio_set_value(unsigned gpio, int value)
> EXPORT_SYMBOL_GPL(__gpio_set_value);
>
> /**
> + * gpio_set_bias() - set a gpio's bias
> + * @gpio: gpio whose bias will be set
> + * @bias: bias mode to set
> + * Context: process
> + *
> + * This is used to directly or indirectly to implement gpio_set_bias().
> + * It invokes the associated gpio_chip.set_bias() method. Usually this
> + * applies to input pins.
> + */
> +void gpio_set_bias(unsigned gpio, enum gpio_bias bias)
> +{
> + struct gpio_chip *chip;
> +
> + chip = gpio_to_chip(gpio);
> + /* Implementing this is not mandatory */
> + if (chip->set_bias)
> + chip->set_bias(chip, gpio - chip->base, bias);
> +}
> +EXPORT_SYMBOL_GPL(gpio_set_bias);
> +
> +/**
> + * gpio_set_drive() - set a gpio's drive mode
> + * @gpio: gpio whose drive mode will be set
> + * @drive: drive mode to set
> + * Context: process
> + *
> + * This is used to directly or indirectly to implement gpio_set_drive().
> + * It invokes the associated gpio_chip.set_drive() method. Call this
> + * before the __gpio_set_output() function to enable special drive modes.
> + */
> +void gpio_set_drive(unsigned gpio, enum gpio_drive drive)
> +{
> + struct gpio_chip *chip;
> +
> + chip = gpio_to_chip(gpio);
> + /* Implementing this is not mandatory */
> + if (chip->set_drive)
> + chip->set_drive(chip, gpio - chip->base, drive);
> +}
> +EXPORT_SYMBOL_GPL(gpio_set_drive);
> +
> +
> +/**
> * __gpio_cansleep() - report whether gpio value access will sleep
> * @gpio: gpio in question
> * Context: any
> diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
> index ff5c660..b4971b1 100644
> --- a/include/asm-generic/gpio.h
> +++ b/include/asm-generic/gpio.h
> @@ -59,6 +59,8 @@ struct device_node;
> * returns either the value actually sensed, or zero
> * @direction_output: configures signal "offset" as output, or returns error
> * @set: assigns output value for signal "offset"
> + * @set_bias: set a certain bias for the GPIO
> + * @set_drive: set a certain drive mode for the GPIO
> * @to_irq: optional hook supporting non-static gpio_to_irq() mappings;
> * implementation may not sleep
> * @dbg_show: optional routine to show contents in debugfs; default code
> @@ -109,6 +111,14 @@ struct gpio_chip {
> void (*set)(struct gpio_chip *chip,
> unsigned offset, int value);
>
> + void (*set_bias)(struct gpio_chip *chip,
> + unsigned offset,
> + enum gpio_bias bias);
> +
> + void (*set_drive)(struct gpio_chip *chip,
> + unsigned offset,
> + enum gpio_drive drive);
> +
> int (*to_irq)(struct gpio_chip *chip,
> unsigned offset);
>
> @@ -158,6 +168,8 @@ extern int gpio_set_debounce(unsigned gpio, unsigned debounce);
> extern int gpio_get_value_cansleep(unsigned gpio);
> extern void gpio_set_value_cansleep(unsigned gpio, int value);
>
> +extern void gpio_set_bias(unsigned gpio, enum gpio_bias bias);
> +extern void gpio_set_drive(unsigned gpio, enum gpio_drive drive);
With the pinmux architecture a gpio can be multiplexed with different
functional modules.
Another API to select this would make it more powerful. At boot a lot of
gpios are configured by the board-file.
How do you feel about another API that can accepts the gpio config
parameters (void *data) and set them all at once?
This would make it more generic to suit different gpio parameters that
an arch might have.

>
> /* A platform's<asm/gpio.h> code may want to inline the I/O calls when
> * the GPIO is constant and refers to some always-present controller,
> diff --git a/include/linux/gpio.h b/include/linux/gpio.h
> index 32720ba..6b48c15 100644
> --- a/include/linux/gpio.h
> +++ b/include/linux/gpio.h
> @@ -3,6 +3,43 @@
>
> /* see Documentation/gpio.txt */
>
> +/**
> + * enum gpio_bias - bias modes for GPIOs
> + * @GPIO_BIAS_FLOAT: no specific bias, the GPIO will float or state is no
> + * controlled by software
> + * @GPIO_BIAS_PULL_UP: the GPIO will be pulled up (usually with high impedance
> + * to VDD)
> + * @GPIO_BIAS_PULL_DOWN: the GPIO will be pulled down (usually with high
> + * impedance to GROUND)
> + * @GPIO_BIAS_HIGH: the GPIO will be wired high, connected to VDD
> + * @GPIO_BIAS_GROUND: the GPIO will be grounded, connected to GROUND
> + */
> +enum gpio_bias {
> + GPIO_BIAS_FLOAT,
> + GPIO_BIAS_PULL_UP,
> + GPIO_BIAS_PULL_DOWN,
> + GPIO_BIAS_HIGH,
> + GPIO_BIAS_GROUND,
> +};
> +
> +/**
> + * enum gpio_drive - drive modes for GPIOs (output)
> + * @GPIO_DRIVE_PUSH_PULL: the GPIO will be driven actively high and low, this
> + * is the most typical case and is typically achieved with two active
> + * transistors on the output
> + * @GPIO_DRIVE_OPEN_DRAIN: the GPIO will be driven with open drain (open
> + * collector) which means it is usually wired with other output ports
> + * which are then pulled up with an external resistor
> + * @GPIO_DRIVE_OPEN_SOURCE: the GPIO will be driven with open drain
> + * (open emitter) which is the same as open drain mutatis mutandis but
> + * pulled to ground
> + */
> +enum gpio_drive {
> + GPIO_DRIVE_PUSH_PULL,
> + GPIO_DRIVE_OPEN_DRAIN,
> + GPIO_DRIVE_OPEN_SOURCE,
> +};
> +
> #ifdef CONFIG_GENERIC_GPIO
> #include<asm/gpio.h>
>
> @@ -90,6 +127,18 @@ static inline void gpio_set_value(unsigned gpio, int value)
> WARN_ON(1);
> }
>
> +static inline void gpio_set_bias(unsigned gpio, enum gpio_bias bias)
> +{
> + /* GPIO can never have been requested */
> + WARN_ON(1);
> +}
> +
> +static inline void gpio_set_drive(unsigned gpio, enum gpio_drive drive)
> +{
> + /* GPIO can never have been requested */
> + WARN_ON(1);
> +}
> +
> static inline int gpio_cansleep(unsigned gpio)
> {
> /* GPIO can never have been requested or set as {in,out}put */


Thanks,
Rohit Vaswani

--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.


\
 
 \ /
  Last update: 2011-04-25 20:55    [W:0.165 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site