lkml.org 
[lkml]   [2011]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v5 0/2] Add PRUSS UIO driver support
Date
This patch series add support for PRUSS (Programmable Real-time Unit Sub
System) UIO driver in Texas Instruments DA850, AM18xx and OMAPL1-38 processors.
PRUSS is programmable RISC core which can be used to implement Soft IPs
(eg:- DMA, CAN, UART,SmartCard) and Industrial communications data link layers
(eg:- PROFIBUS). UIO driver exposes PRUSS resources like memory and interrupts
to user space application.PRUSS UIO application API can be used to control PRUs
in PRUSS, setup PRU INTC, load firmware to PRUs and implement IPC between Host
processor and PRUs. More information on PRUSS and UIO linux user space API
available in the links below

http://processors.wiki.ti.com/index.php/Programmable_Realtime_Unit_Subsystem
http://processors.wiki.ti.com/index.php/PRU_Linux_Application_Loader
http://processors.wiki.ti.com/index.php/PRU_Linux_Application_Loader_API_Guide

Pratheesh Gangadhar (2):
PRUSS UIO driver support
Defines DA850/AM18xx/OMAPL1-38 SOC resources used by PRUSS UIO driver

arch/arm/mach-davinci/board-da850-evm.c | 4 +
arch/arm/mach-davinci/da850.c | 35 +++++
arch/arm/mach-davinci/devices-da8xx.c | 73 ++++++++++
arch/arm/mach-davinci/include/mach/da8xx.h | 3 +
drivers/uio/Kconfig | 17 +++
drivers/uio/Makefile | 1 +
drivers/uio/uio_pruss.c | 217 ++++++++++++++++++++++++++++
7 files changed, 350 insertions(+), 0 deletions(-)
create mode 100644 drivers/uio/uio_pruss.c



\
 
 \ /
  Last update: 2011-02-25 09:49    [W:0.070 / U:0.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site