lkml.org 
[lkml]   [2011]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC v2 PATCH 6/7] drivers: rtc: Add support for Qualcomm PMIC8058 RTC
Date
PMIC8058 is Qualcomm's power management IC. A
32-bit RTC is housed inside this PMIC. The RTC driver
uses SSBI to communicate with the RTC module.

Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
---
Changes from v1:
Addressed review comments from Peter.
removed rtc"0", local variable to store ctrl register state,
removed rtc_irq, added alarm_irq_enable

drivers/rtc/Kconfig | 9 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-pm8058.c | 488 ++++++++++++++++++++++++++++++++++++++++
include/linux/rtc/rtc-pm8058.h | 29 +++
4 files changed, 527 insertions(+), 0 deletions(-)
create mode 100644 drivers/rtc/rtc-pm8058.c
create mode 100644 include/linux/rtc/rtc-pm8058.h

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 4941cad..1458c26 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -985,4 +985,13 @@ config RTC_DRV_LPC32XX
This driver can also be buillt as a module. If so, the module
will be called rtc-lpc32xx.

+config RTC_DRV_PM8058
+ tristate "Qualcomm PMIC8058 RTC"
+ depends on PMIC8058
+ help
+ Say Y here if you want to support the Qualcomm PMIC8058 RTC.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pmic8058-rtc.
+
endif # RTC_CLASS
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 2afdaf3..4bee015 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -74,6 +74,7 @@ obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o
obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o
obj-$(CONFIG_RTC_DRV_PCF2123) += rtc-pcf2123.o
obj-$(CONFIG_RTC_DRV_PCF50633) += rtc-pcf50633.o
+obj-$(CONFIG_RTC_DRV_PM8058) += rtc-pm8058.o
obj-$(CONFIG_RTC_DRV_PL030) += rtc-pl030.o
obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o
obj-$(CONFIG_RTC_DRV_PS3) += rtc-ps3.o
diff --git a/drivers/rtc/rtc-pm8058.c b/drivers/rtc/rtc-pm8058.c
new file mode 100644
index 0000000..3588273
--- /dev/null
+++ b/drivers/rtc/rtc-pm8058.c
@@ -0,0 +1,488 @@
+/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/rtc.h>
+#include <linux/mfd/pmic8058.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/rtc/rtc-pm8058.h>
+
+/* RTC control registers */
+#define PM8058_RTC_CTRL 0x1E8
+#define PM8058_RTC_ALARM_CTRL 0x1E9
+#define PM8058_RTC_TEST 0x1F6
+
+/* RTC register bases */
+#define PM8058_RTC_READ_BASE 0x1EE
+#define PM8058_RTC_WRITE_BASE 0x1EA
+#define PM8058_RTC_ALARM_BASE 0x1F2
+
+/* RTC_CTRL register bit fields */
+#define PM8058_RTC_ENABLE BIT(7)
+#define PM8058_RTC_ALARM_ENABLE BIT(1)
+
+#define NUM_8_BIT_RTC_REGS 0x4
+
+/**
+ * struct pm8058_rtc - rtc driver internal structure
+ * @rtc: rtc device for this driver
+ * @rtc_alarm_irq: rtc alarm irq number
+ * @pm_chip: pointer to pm8058 parent structure
+ */
+struct pm8058_rtc {
+ struct rtc_device *rtc;
+ int rtc_alarm_irq;
+ u8 rtc_ctrl_reg;
+ struct pm8058_chip *pm_chip;
+};
+
+/*
+ * The RTC registers need to be read/written one byte at a time. This is a
+ * hardware limitation.
+ */
+static int
+pm8058_rtc_read_bytes(struct pm8058_rtc *rtc_dd, u8 *rtc_val, int base)
+{
+ int i, rc;
+
+ /* Read the 32-bit register value, 8 bits at a time. */
+ for (i = 0; i < NUM_8_BIT_RTC_REGS; i++) {
+ rc = pm8058_read(rtc_dd->pm_chip, base + i, &rtc_val[i], 1);
+ if (rc < 0) {
+ pr_err("PM8058 read failed\n");
+ return rc;
+ }
+ }
+
+ return 0;
+}
+
+static int
+pm8058_rtc_write_bytes(struct pm8058_rtc *rtc_dd, u8 *rtc_val, int base)
+{
+ int i, rc;
+
+ /* Write the 32-bit register value, 8 bits at a time. */
+ for (i = 0; i < NUM_8_BIT_RTC_REGS; i++) {
+ rc = pm8058_write(rtc_dd->pm_chip, base + i, &rtc_val[i], 1);
+ if (rc < 0) {
+ pr_err("PM8058 read failed\n");
+ return rc;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Steps to write the RTC registers.
+ * 1. Disable alarm if enabled.
+ * 2. Write 0x00 to LSB.
+ * 3. Write Byte[1], Byte[2], Byte[3] then Byte[0].
+ * 4. Enable alarm if disabled in step 1.
+ */
+static int
+pm8058_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ int rc;
+ unsigned long secs;
+ u8 value[4], reg = 0, alarm_enabled = 0, i;
+ struct pm8058_rtc *rtc_dd = dev_get_drvdata(dev);
+
+ rtc_tm_to_time(tm, &secs);
+
+ value[0] = secs & 0xFF;
+ value[1] = (secs >> 8) & 0xFF;
+ value[2] = (secs >> 16) & 0xFF;
+ value[3] = (secs >> 24) & 0xFF;
+
+ dev_dbg(dev, "Seconds value to be written to RTC = %lu\n", secs);
+
+ if (rtc_dd->rtc_ctrl_reg & PM8058_RTC_ALARM_ENABLE) {
+ alarm_enabled = 1;
+ rtc_dd->rtc_ctrl_reg &= ~PM8058_RTC_ALARM_ENABLE;
+ rc = pm8058_write(rtc_dd->pm_chip, PM8058_RTC_CTRL,
+ &rtc_dd->rtc_ctrl_reg, 1);
+ if (rc < 0) {
+ dev_err(dev, "PM8058 write failed\n");
+ rtc_dd->rtc_ctrl_reg |= PM8058_RTC_ALARM_ENABLE;
+ return rc;
+ }
+ }
+
+ /* Write Byte[1], Byte[2], Byte[3], Byte[0] */
+ reg = 0;
+ rc = pm8058_write(rtc_dd->pm_chip, PM8058_RTC_WRITE_BASE, &reg, 1);
+ if (rc < 0) {
+ dev_err(dev, "PM8058 write failed\n");
+ return rc;
+ }
+
+ for (i = 1; i < NUM_8_BIT_RTC_REGS; i++) {
+ rc = pm8058_write(rtc_dd->pm_chip, PM8058_RTC_WRITE_BASE + i,
+ &value[i], 1);
+ if (rc < 0) {
+ dev_err(dev, "Write to RTC registers failed\n");
+ return rc;
+ }
+ }
+
+ rc = pm8058_write(rtc_dd->pm_chip, PM8058_RTC_WRITE_BASE,
+ &value[0], 1);
+ if (rc < 0) {
+ dev_err(dev, "PM8058 write failed\n");
+ return rc;
+ }
+
+ if (alarm_enabled) {
+ rtc_dd->rtc_ctrl_reg |= PM8058_RTC_ALARM_ENABLE;
+ rc = pm8058_write(rtc_dd->pm_chip, PM8058_RTC_CTRL,
+ &rtc_dd->rtc_ctrl_reg, 1);
+ if (rc < 0) {
+ dev_err(dev, "PM8058 write failed\n");
+ rtc_dd->rtc_ctrl_reg &= ~PM8058_RTC_ALARM_ENABLE;
+ return rc;
+ }
+ }
+
+ return 0;
+}
+
+static int
+pm8058_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ int rc;
+ u8 value[4], reg;
+ unsigned long secs;
+ struct pm8058_rtc *rtc_dd = dev_get_drvdata(dev);
+
+ rc = pm8058_rtc_read_bytes(rtc_dd, value, PM8058_RTC_READ_BASE);
+ if (rc < 0) {
+ dev_err(dev, "RTC time read failed\n");
+ return rc;
+ }
+
+ /*
+ * Read the LSB again and check if there has been a carry over.
+ * If there is, redo the read operation.
+ */
+ rc = pm8058_read(rtc_dd->pm_chip, PM8058_RTC_READ_BASE, &reg, 1);
+ if (rc < 0) {
+ dev_err(dev, "PM8058 read failed\n");
+ return rc;
+ }
+
+ if (unlikely(reg < value[0])) {
+ rc = pm8058_rtc_read_bytes(rtc_dd, value,
+ PM8058_RTC_READ_BASE);
+ if (rc < 0) {
+ dev_err(dev, "RTC time read failed\n");
+ return rc;
+ }
+ }
+
+ secs = value[0] | (value[1] << 8) | (value[2] << 16) | (value[3] << 24);
+
+ rtc_time_to_tm(secs, tm);
+
+ rc = rtc_valid_tm(tm);
+ if (rc < 0) {
+ dev_err(dev, "Invalid time read from PMIC8058\n");
+ return rc;
+ }
+
+ dev_dbg(dev, "secs = %lu, h:m:s == %d:%d:%d, d/m/y = %d/%d/%d\n",
+ secs, tm->tm_hour, tm->tm_min, tm->tm_sec,
+ tm->tm_mday, tm->tm_mon, tm->tm_year);
+
+ return 0;
+}
+
+static int
+pm8058_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+ int rc;
+ u8 value[4], reg;
+ unsigned long secs;
+ struct pm8058_rtc *rtc_dd = dev_get_drvdata(dev);
+
+ rtc_tm_to_time(&alarm->time, &secs);
+
+ value[0] = secs & 0xFF;
+ value[1] = (secs >> 8) & 0xFF;
+ value[2] = (secs >> 16) & 0xFF;
+ value[3] = (secs >> 24) & 0xFF;
+
+ rc = pm8058_rtc_write_bytes(rtc_dd, value, PM8058_RTC_ALARM_BASE);
+ if (rc < 0) {
+ dev_err(dev, "Alarm could not be set\n");
+ return rc;
+ }
+
+ reg = rtc_dd->rtc_ctrl_reg;
+
+ reg = (alarm->enabled) ? (reg | PM8058_RTC_ALARM_ENABLE) :
+ (reg & ~PM8058_RTC_ALARM_ENABLE);
+
+ rc = pm8058_write(rtc_dd->pm_chip, PM8058_RTC_CTRL, &reg, 1);
+ if (rc < 0) {
+ dev_err(dev, "PM8058 write failed\n");
+ return rc;
+ }
+ rtc_dd->rtc_ctrl_reg = reg;
+
+ dev_dbg(dev, "Alarm Set for h:r:s=%d:%d:%d, d/m/y=%d/%d/%d\n",
+ alarm->time.tm_hour, alarm->time.tm_min,
+ alarm->time.tm_sec, alarm->time.tm_mday,
+ alarm->time.tm_mon, alarm->time.tm_year);
+
+ return 0;
+}
+
+static int
+pm8058_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+ int rc;
+ u8 value[4];
+ unsigned long secs;
+ struct pm8058_rtc *rtc_dd = dev_get_drvdata(dev);
+
+ /* Check if the alarm is enabled */
+ alarm->enabled = !!(rtc_dd->rtc_ctrl_reg & PM8058_RTC_ALARM_ENABLE);
+
+ rc = pm8058_rtc_read_bytes(rtc_dd, value,
+ PM8058_RTC_ALARM_BASE);
+ if (rc < 0) {
+ dev_err(dev, "RTC alarm time read failed\n");
+ return rc;
+ }
+
+ secs = value[0] | (value[1] << 8) | (value[2] << 16) | (value[3] << 24);
+
+ rtc_time_to_tm(secs, &alarm->time);
+
+ rc = rtc_valid_tm(&alarm->time);
+ if (rc < 0) {
+ dev_err(dev, "Invalid time read from PMIC8058\n");
+ return rc;
+ }
+
+ dev_dbg(dev, "Alarm set for - h:r:s=%d:%d:%d, d/m/y=%d/%d/%d\n",
+ alarm->time.tm_hour, alarm->time.tm_min,
+ alarm->time.tm_sec, alarm->time.tm_mday,
+ alarm->time.tm_mon, alarm->time.tm_year);
+
+ return 0;
+}
+
+
+static int
+pm8058_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+ int rc;
+ struct pm8058_rtc *rtc_dd = dev_get_drvdata(dev);
+ u8 reg = rtc_dd->rtc_ctrl_reg;
+
+ reg = (enabled) ? (reg | PM8058_RTC_ALARM_ENABLE) :
+ (reg & ~PM8058_RTC_ALARM_ENABLE);
+
+ rc = pm8058_write(rtc_dd->pm_chip, PM8058_RTC_CTRL, &reg, 1);
+ if (rc < 0) {
+ dev_err(dev, "PM8058 write failed\n");
+ return rc;
+ }
+ rtc_dd->rtc_ctrl_reg = reg;
+
+ return 0;
+}
+
+static struct rtc_class_ops pm8058_rtc_ops = {
+ .read_time = pm8058_rtc_read_time,
+ .set_alarm = pm8058_rtc_set_alarm,
+ .read_alarm = pm8058_rtc_read_alarm,
+ .alarm_irq_enable = pm8058_rtc_alarm_irq_enable,
+};
+
+static irqreturn_t pm8058_alarm_trigger(int irq, void *dev_id)
+{
+ struct pm8058_rtc *rtc_dd = dev_id;
+
+ rtc_update_irq(rtc_dd->rtc, 1, RTC_IRQF | RTC_AF);
+
+ pr_debug("Alarm Triggered !!\n");
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit pm8058_rtc_probe(struct platform_device *pdev)
+{
+ int rc;
+ u8 reg;
+ bool rtc_write_enable = false;
+ struct pm8058_rtc *rtc_dd;
+ struct pm8058_chip *pm_chip;
+ const struct pm8058_rtc_pdata *pdata = pdev->dev.platform_data;
+
+ if (pdata != NULL)
+ rtc_write_enable = pdata->rtc_write_enable;
+
+ pm_chip = platform_get_drvdata(pdev);
+ if (pm_chip == NULL) {
+ dev_err(&pdev->dev, "Invalid driver information!\n");
+ return -ENXIO;
+ }
+
+ rtc_dd = kzalloc(sizeof(*rtc_dd), GFP_KERNEL);
+ if (rtc_dd == NULL) {
+ dev_err(&pdev->dev, "Unable to allocate memory!\n");
+ return -ENOMEM;
+ }
+
+ rtc_dd->rtc_alarm_irq = platform_get_irq(pdev, 0);
+ if (!rtc_dd->rtc_alarm_irq) {
+ dev_err(&pdev->dev, "RTC / Alarm IRQ resource absent!\n");
+ rc = -ENXIO;
+ goto fail_rtc_enable;
+ }
+
+ rtc_dd->pm_chip = pm_chip;
+
+ /* Check if the RTC is on, else turn it on */
+ rc = pm8058_read(pm_chip, PM8058_RTC_CTRL, &reg, 1);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "PM8058 read failed!\n");
+ goto fail_rtc_enable;
+ }
+
+ if (!(reg & PM8058_RTC_ENABLE)) {
+ reg |= PM8058_RTC_ENABLE;
+ rc = pm8058_write(pm_chip, PM8058_RTC_CTRL, &reg, 1);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "PM8058 write failed!\n");
+ goto fail_rtc_enable;
+ }
+ }
+ rtc_dd->rtc_ctrl_reg = reg;
+
+ if (rtc_write_enable == true)
+ pm8058_rtc_ops.set_time = pm8058_rtc_set_time,
+
+ /* Register the RTC device */
+ rtc_dd->rtc = rtc_device_register("pm8058_rtc", &pdev->dev,
+ &pm8058_rtc_ops, THIS_MODULE);
+ if (IS_ERR(rtc_dd->rtc)) {
+ dev_err(&pdev->dev, "%s: RTC registration failed (%ld)\n",
+ __func__, PTR_ERR(rtc_dd->rtc));
+ rc = PTR_ERR(rtc_dd->rtc);
+ goto fail_rtc_enable;
+ }
+
+ platform_set_drvdata(pdev, rtc_dd);
+
+ /* Request the alarm IRQ */
+ rc = request_any_context_irq(rtc_dd->rtc_alarm_irq,
+ pm8058_alarm_trigger, IRQF_TRIGGER_RISING,
+ "pm8058_rtc_alarm", rtc_dd);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "Request IRQ failed (%d)\n", rc);
+ goto fail_req_irq;
+ }
+
+ device_init_wakeup(&pdev->dev, 1);
+
+ dev_dbg(&pdev->dev, "Probe success !!\n");
+
+ return 0;
+
+fail_req_irq:
+ rtc_device_unregister(rtc_dd->rtc);
+fail_rtc_enable:
+ kfree(rtc_dd);
+ return rc;
+}
+
+#ifdef CONFIG_PM
+static int pm8058_rtc_resume(struct device *dev)
+{
+ struct pm8058_rtc *rtc_dd = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ disable_irq_wake(rtc_dd->rtc_alarm_irq);
+
+ return 0;
+}
+
+static int pm8058_rtc_suspend(struct device *dev)
+{
+ struct pm8058_rtc *rtc_dd = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ enable_irq_wake(rtc_dd->rtc_alarm_irq);
+
+ return 0;
+}
+
+static const struct dev_pm_ops pm8058_rtc_pm_ops = {
+ .suspend = pm8058_rtc_suspend,
+ .resume = pm8058_rtc_resume,
+};
+#endif
+
+static int __devexit pm8058_rtc_remove(struct platform_device *pdev)
+{
+ struct pm8058_rtc *rtc_dd = platform_get_drvdata(pdev);
+
+ device_init_wakeup(&pdev->dev, 0);
+ free_irq(rtc_dd->rtc_alarm_irq, rtc_dd);
+ rtc_device_unregister(rtc_dd->rtc);
+ kfree(rtc_dd);
+
+ return 0;
+}
+
+static struct platform_driver pm8058_rtc_driver = {
+ .probe = pm8058_rtc_probe,
+ .remove = __devexit_p(pm8058_rtc_remove),
+ .driver = {
+ .name = "pm8058-rtc",
+ .owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .pm = &pm8058_rtc_pm_ops,
+#endif
+ },
+};
+
+static int __init pm8058_rtc_init(void)
+{
+ return platform_driver_register(&pm8058_rtc_driver);
+}
+module_init(pm8058_rtc_init);
+
+static void __exit pm8058_rtc_exit(void)
+{
+ platform_driver_unregister(&pm8058_rtc_driver);
+}
+module_exit(pm8058_rtc_exit);
+
+MODULE_ALIAS("platform:pm8058-rtc");
+MODULE_DESCRIPTION("PMIC8058 RTC driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Anirudh Ghayal <aghayal@codeaurora.org>");
diff --git a/include/linux/rtc/rtc-pm8058.h b/include/linux/rtc/rtc-pm8058.h
new file mode 100644
index 0000000..651c5b4
--- /dev/null
+++ b/include/linux/rtc/rtc-pm8058.h
@@ -0,0 +1,29 @@
+/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef __RTC_PM8058_H__
+#define __RTC_PM8058_H__
+
+/**
+ * struct pm8058_rtc_pdata - RTC driver platform data
+ * @rtc_write_enable: variable stating RTC write capability
+ */
+struct pm8058_rtc_pdata {
+ bool rtc_write_enable;
+};
+
+#endif /* __RTC_PM8058_H__ */
--
1.7.3.5


\
 
 \ /
  Last update: 2011-02-01 14:53    [W:0.400 / U:0.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site