lkml.org 
[lkml]   [2011]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 07/10] TTY: serial, inline uart_get
Date
We need to expand uart_get into uart_open. We need it to move on with
conversion to use tty_port_open helper. After we do this, the code
will be much more similar to what tty_port_open does.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Alan Cox <alan@linux.intel.com>
---
drivers/tty/serial/serial_core.c | 66 ++++++++++++-------------------------
1 files changed, 22 insertions(+), 44 deletions(-)

diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 4b1dcd3..2ca4df4 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -1429,33 +1429,6 @@ static void uart_dtr_rts(struct tty_port *port, int onoff)
uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
}

-static struct uart_state *uart_get(struct uart_driver *drv, int line)
-{
- struct uart_state *state;
- struct tty_port *port;
- int ret = 0;
-
- state = drv->state + line;
- port = &state->port;
- if (mutex_lock_interruptible(&port->mutex)) {
- ret = -ERESTARTSYS;
- goto err;
- }
-
- port->count++;
- if (!state->uart_port || state->uart_port->flags & UPF_DEAD) {
- ret = -ENXIO;
- goto err_unlock;
- }
- return state;
-
- err_unlock:
- port->count--;
- mutex_unlock(&port->mutex);
- err:
- return ERR_PTR(ret);
-}
-
/*
* calls to uart_open are serialised by the BKL in
* fs/char_dev.c:chrdev_open()
@@ -1469,26 +1442,29 @@ static struct uart_state *uart_get(struct uart_driver *drv, int line)
static int uart_open(struct tty_struct *tty, struct file *filp)
{
struct uart_driver *drv = (struct uart_driver *)tty->driver->driver_state;
- struct uart_state *state;
- struct tty_port *port;
int retval, line = tty->index;
+ struct uart_state *state = drv->state + line;
+ struct tty_port *port = &state->port;

pr_debug("uart_open(%d) called\n", line);

/*
- * We take the semaphore inside uart_get to guarantee that we won't
- * be re-entered while allocating the state structure, or while we
- * request any IRQs that the driver may need. This also has the nice
- * side-effect that it delays the action of uart_hangup, so we can
- * guarantee that state->port.tty will always contain something
- * reasonable.
+ * We take the semaphore here to guarantee that we won't be re-entered
+ * while allocating the state structure, or while we request any IRQs
+ * that the driver may need. This also has the nice side-effect that
+ * it delays the action of uart_hangup, so we can guarantee that
+ * state->port.tty will always contain something reasonable.
*/
- state = uart_get(drv, line);
- if (IS_ERR(state)) {
- retval = PTR_ERR(state);
- goto fail;
+ if (mutex_lock_interruptible(&port->mutex)) {
+ retval = -ERESTARTSYS;
+ goto end;
+ }
+
+ port->count++;
+ if (!state->uart_port || state->uart_port->flags & UPF_DEAD) {
+ retval = -ENXIO;
+ goto err_dec_count;
}
- port = &state->port;

/*
* Once we set tty->driver_data here, we are guaranteed that
@@ -1505,9 +1481,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
*/
if (tty_hung_up_p(filp)) {
retval = -EAGAIN;
- port->count--;
- mutex_unlock(&port->mutex);
- goto fail;
+ goto err_dec_count;
}

/*
@@ -1528,8 +1502,12 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
if (retval == 0)
retval = tty_port_block_til_ready(port, tty, filp);

-fail:
+end:
return retval;
+err_dec_count:
+ port->count--;
+ mutex_unlock(&port->mutex);
+ goto end;
}

static const char *uart_type(struct uart_port *port)
--
1.7.7



\
 
 \ /
  Last update: 2011-11-09 21:37    [W:0.233 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site