lkml.org 
[lkml]   [2011]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 03/10] TTY: serial, switch closing_wait and close_delay to jiffies
Date
As the tty_port helpers think closing_wait and close_delay are in
jiffies and we want to use the helpers (next patches), we have to
switch the closing_wait and close_delay from ms to jiffies now.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Alan Cox <alan@linux.intel.com>
---
drivers/tty/serial/serial_core.c | 19 ++++++++++---------
1 files changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 8d825a3..2b1ee7c 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -659,10 +659,10 @@ static int uart_get_info(struct uart_state *state,
tmp.flags = uport->flags;
tmp.xmit_fifo_size = uport->fifosize;
tmp.baud_base = uport->uartclk / 16;
- tmp.close_delay = port->close_delay / 10;
+ tmp.close_delay = jiffies_to_msecs(port->close_delay) / 10;
tmp.closing_wait = port->closing_wait == ASYNC_CLOSING_WAIT_NONE ?
ASYNC_CLOSING_WAIT_NONE :
- port->closing_wait / 10;
+ jiffies_to_msecs(port->closing_wait) / 10;
tmp.custom_divisor = uport->custom_divisor;
tmp.hub6 = uport->hub6;
tmp.io_type = uport->iotype;
@@ -696,9 +696,10 @@ static int uart_set_info(struct tty_struct *tty, struct uart_state *state,
new_port += (unsigned long) new_serial.port_high << HIGH_BITS_OFFSET;

new_serial.irq = irq_canonicalize(new_serial.irq);
- close_delay = new_serial.close_delay * 10;
+ close_delay = msecs_to_jiffies(new_serial.close_delay * 10);
closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
- ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;
+ ASYNC_CLOSING_WAIT_NONE :
+ msecs_to_jiffies(new_serial.closing_wait * 10);

/*
* This semaphore protects port->count. It is also
@@ -1305,8 +1306,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
spin_unlock_irqrestore(&port->lock, flags);

if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
- tty_wait_until_sent_from_close(tty,
- msecs_to_jiffies(port->closing_wait));
+ tty_wait_until_sent_from_close(tty, port->closing_wait);

/*
* At this point, we stop accepting input. To do this, we
@@ -1338,7 +1338,8 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
if (port->blocked_open) {
spin_unlock_irqrestore(&port->lock, flags);
if (port->close_delay)
- msleep_interruptible(port->close_delay);
+ msleep_interruptible(
+ jiffies_to_msecs(port->close_delay));
spin_lock_irqsave(&port->lock, flags);
} else if (!uart_console(uport)) {
spin_unlock_irqrestore(&port->lock, flags);
@@ -2276,8 +2277,8 @@ int uart_register_driver(struct uart_driver *drv)

tty_port_init(port);
port->ops = &uart_port_ops;
- port->close_delay = 500; /* .5 seconds */
- port->closing_wait = 30000; /* 30 seconds */
+ port->close_delay = HZ / 2; /* .5 seconds */
+ port->closing_wait = 30 * HZ;/* 30 seconds */
}

retval = tty_register_driver(normal);
--
1.7.7



\
 
 \ /
  Last update: 2011-11-09 21:37    [from the cache]
©2003-2011 Jasper Spaans