lkml.org 
[lkml]   [2011]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[12/38] lis3: fix regression of HP DriveGuard with 8bit chip
3.0-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 05faadcf59507e8eea57ffbeea9cbb14c9a2ab3d upstream.

Commit 2a7fade7e03 ("hwmon: lis3: Power on corrections") caused a
regression on HP laptops with 8bit chip. Writing CTRL2_BOOT_8B bit seems
clearing the BIOS setup, and no proper interrupt for DriveGuard will be
triggered any more.

Since the init code there is basically only for embedded devices, put a
pdata check so that the problematic initialization will be skipped for
hp_accel stuff.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Cc: Samu Onkalo <samu.p.onkalo@nokia.com>
Signed-off-by: Andrew Morton <akpm@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
drivers/misc/lis3lv02d/lis3lv02d.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)

--- a/drivers/misc/lis3lv02d/lis3lv02d.c
+++ b/drivers/misc/lis3lv02d/lis3lv02d.c
@@ -375,12 +375,14 @@ void lis3lv02d_poweron(struct lis3lv02d
* both have been read. So the value read will always be correct.
* Set BOOT bit to refresh factory tuning values.
*/
- lis3->read(lis3, CTRL_REG2, &reg);
- if (lis3->whoami == WAI_12B)
- reg |= CTRL2_BDU | CTRL2_BOOT;
- else
- reg |= CTRL2_BOOT_8B;
- lis3->write(lis3, CTRL_REG2, reg);
+ if (lis3->pdata) {
+ lis3->read(lis3, CTRL_REG2, &reg);
+ if (lis3->whoami == WAI_12B)
+ reg |= CTRL2_BDU | CTRL2_BOOT;
+ else
+ reg |= CTRL2_BOOT_8B;
+ lis3->write(lis3, CTRL_REG2, reg);
+ }

/* LIS3 power on delay is quite long */
msleep(lis3->pwron_delay / lis3lv02d_get_odr());



\
 
 \ /
  Last update: 2011-10-11 19:09    [W:0.156 / U:1.920 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site