lkml.org 
[lkml]   [2011]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH resend 2] Add sc16is7x2 driver
IRQ is now implemented with work queue (like max3100).
The problem is, that the sc16is7x2 has a low active irq. But with active
low threaded_irqs, shared irqs are not allowed.

Please try this one and report errors.

Regards,
Manuel Stahl

PS: sorry that the patch is not inline, not sure how to configure
thunderbird correctly
Add sc16is7x2 driver

This patch adds support for the sc16is7x2 SPI to UART chips.
Each chip has two UARTs and 8 GPIOs.

Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
---

drivers/serial/Kconfig | 9 +
drivers/serial/Makefile | 1 +
drivers/serial/sc16is7x2.c | 1063 ++++++++++++++++++++++++++++++++++++++
include/linux/serial_core.h | 6 +-
include/linux/serial_sc16is7x2.h | 17 +
5 files changed, 1095 insertions(+), 1 deletions(-)

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 188aff6..a070345 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -269,6 +269,15 @@ config SERIAL_8250_RM9K

comment "Non-8250 serial port support"

+config SERIAL_SC16IS7X2
+ tristate "SC16IS7x2 chips"
+ depends on SPI_MASTER
+ select SERIAL_CORE
+ help
+ Selecting this option will add support for SC16IS7x2 SPI UARTs.
+ The GPIOs are exported via gpiolib interface.
+ If unsure, say N.
+
config SERIAL_AMBA_PL010
tristate "ARM AMBA PL010 serial port support"
depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 8ea92e9..6ff1f0f 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o
obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o
obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
+obj-$(CONFIG_SERIAL_SC16IS7X2) += sc16is7x2.o
obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
diff --git a/drivers/serial/sc16is7x2.c b/drivers/serial/sc16is7x2.c
new file mode 100644
index 0000000..d3156b4
--- /dev/null
+++ b/drivers/serial/sc16is7x2.c
@@ -0,0 +1,1063 @@
+/**
+ * drivers/serial/sc16is7x2.c
+ *
+ * Copyright (C) 2009 Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The SC16IS7x2 device is a SPI driven dual UART with GPIOs.
+ *
+ * The driver exports two uarts and a gpiochip interface.
+ */
+
+/* #define DEBUG */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/freezer.h>
+#include <linux/serial_sc16is7x2.h>
+
+#define MAX_SC16IS7X2 8
+#define FIFO_SIZE 64
+
+#define DRIVER_NAME "sc16is7x2"
+#define TYPE_NAME "SC16IS7x2"
+
+
+#define REG_READ 0x80
+#define REG_WRITE 0x00
+
+/* Special registers */
+#define REG_TXLVL 0x08 /* Transmitter FIFO Level register */
+#define REG_RXLVL 0x09 /* Receiver FIFO Level register */
+#define REG_IOD 0x0A /* IO Direction register */
+#define REG_IOS 0x0B /* IO State register */
+#define REG_IOI 0x0C /* IO Interrupt Enable register */
+#define REG_IOC 0x0E /* IO Control register */
+
+#define IOC_SRESET 0x08 /* Software reset */
+#define IOC_GPIO30 0x04 /* GPIO 3:0 unset: as IO, set: as modem pins */
+#define IOC_GPIO74 0x02 /* GPIO 7:4 unset: as IO, set: as modem pins */
+#define IOC_IOLATCH 0x01 /* Unset: input unlatched, set: input latched */
+
+struct sc16is7x2_chip;
+
+/*
+ * Some registers must be read back to modify.
+ * To save time we cache them here in memory.
+ */
+struct sc16is7x2_channel {
+ struct sc16is7x2_chip *chip; /* back link */
+ struct uart_port uart;
+
+ /* Workqueue that does all the magic */
+ struct workqueue_struct *workqueue;
+ struct work_struct work;
+
+ u16 quot; /* baud rate divisor */
+ u8 iir; /* state of IIR register */
+ u8 lsr; /* state of LSR register */
+ u8 msr; /* state of MSR register */
+ u8 ier; /* cache for IER register */
+ u8 fcr; /* cache for FCR register */
+ u8 lcr; /* cache for LCR register */
+ u8 mcr; /* cache for MCR register */
+ u8 efr; /* cache for EFR register */
+#ifdef DEBUG
+ bool handle_irq;
+#endif
+ bool handle_baud; /* baud rate needs update */
+ bool handle_regs; /* other regs need update */
+ u8 buf[FIFO_SIZE+1]; /* fifo transfer buffer */
+};
+
+struct sc16is7x2_chip {
+ struct spi_device *spi;
+ struct sc16is7x2_channel channel[2];
+
+#ifdef CONFIG_GPIOLIB
+ struct gpio_chip gpio;
+ struct mutex io_lock; /* lock for GPIO functions */
+ u8 io_dir; /* cache for IODir register */
+ u8 io_state; /* cache for IOState register */
+ u8 io_gpio; /* PIN is GPIO */
+ u8 io_control; /* cache for IOControl register */
+#endif
+};
+
+/* ******************************** SPI ********************************* */
+
+static inline u8 write_cmd(u8 reg, u8 ch)
+{
+ return REG_WRITE | (reg & 0xf) << 3 | (ch & 0x1) << 1;
+}
+
+static inline u8 read_cmd(u8 reg, u8 ch)
+{
+ return REG_READ | (reg & 0xf) << 3 | (ch & 0x1) << 1;
+}
+
+/*
+ * sc16is7x2_write - Write a new register content (sync)
+ * @reg: Register offset
+ * @ch: Channel (0 or 1)
+ */
+static int sc16is7x2_write(struct sc16is7x2_chip *ts, u8 reg, u8 ch, u8 val)
+{
+ u8 out[2];
+
+ out[0] = write_cmd(reg, ch);
+ out[1] = val;
+ return spi_write(ts->spi, out, sizeof(out));
+}
+
+/**
+ * sc16is7x2_read - Read back register content
+ * @reg: Register offset
+ * @ch: Channel (0 or 1)
+ *
+ * Returns positive 8 bit value from the device if successful or a
+ * negative value on error
+ */
+static int sc16is7x2_read(struct sc16is7x2_chip *ts, unsigned reg, unsigned ch)
+{
+ return spi_w8r8(ts->spi, read_cmd(reg, ch));
+}
+
+/* ******************************** IRQ ********************************* */
+
+static void sc16is7x2_handle_rx(struct sc16is7x2_chip *ts, unsigned ch)
+{
+ struct sc16is7x2_channel *chan = &ts->channel[ch];
+ struct uart_port *uart = &chan->uart;
+ struct tty_struct *tty = uart->state->port.tty;
+ struct spi_message message;
+ struct spi_transfer t[2];
+ unsigned long flags;
+ u8 lsr = chan->lsr;
+ int rxlvl;
+
+ rxlvl = sc16is7x2_read(ts, REG_RXLVL, ch);
+ if (rxlvl <= 0) {
+ return;
+ } else if (rxlvl > FIFO_SIZE) {
+ /* Ensure sanity of RX level */
+ rxlvl = FIFO_SIZE;
+ }
+
+ dev_dbg(&ts->spi->dev, " %s (%i) %d bytes\n", __func__, ch, rxlvl);
+
+ memset(t, 0, sizeof t);
+ chan->buf[0] = read_cmd(UART_RX, ch);
+ t[0].len = 1;
+ t[0].tx_buf = &chan->buf[0];
+ t[1].len = rxlvl;
+ t[1].rx_buf = &chan->buf[1];
+
+ spi_message_init(&message);
+ spi_message_add_tail(&t[0], &message);
+ spi_message_add_tail(&t[1], &message);
+
+ if (spi_sync(ts->spi, &message)) {
+ dev_err(&ts->spi->dev, " SPI transfer RX handling failed\n");
+ return;
+ }
+ chan->buf[rxlvl + 1] = '\0';
+ dev_dbg(&ts->spi->dev, "%s\n", &chan->buf[1]);
+
+ spin_lock_irqsave(&uart->lock, flags);
+
+ if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) {
+ /*
+ * For statistics only
+ */
+ if (lsr & UART_LSR_BI) {
+ lsr &= ~(UART_LSR_FE | UART_LSR_PE);
+ chan->uart.icount.brk++;
+ /*
+ * We do the SysRQ and SAK checking
+ * here because otherwise the break
+ * may get masked by ignore_status_mask
+ * or read_status_mask.
+ */
+ if (uart_handle_break(&chan->uart))
+ goto ignore_char;
+ } else if (lsr & UART_LSR_PE)
+ chan->uart.icount.parity++;
+ else if (lsr & UART_LSR_FE)
+ chan->uart.icount.frame++;
+ if (lsr & UART_LSR_OE)
+ chan->uart.icount.overrun++;
+ }
+
+ /* Insert received data */
+ tty_insert_flip_string(tty, &chan->buf[1], rxlvl);
+ /* Update RX counter */
+ uart->icount.rx += rxlvl;
+
+ignore_char:
+ spin_unlock_irqrestore(&uart->lock, flags);
+
+ /* Push the received data to receivers */
+ if (rxlvl)
+ tty_flip_buffer_push(tty);
+}
+
+static void sc16is7x2_handle_tx(struct sc16is7x2_chip *ts, unsigned ch)
+{
+ struct sc16is7x2_channel *chan = &ts->channel[ch];
+ struct uart_port *uart = &chan->uart;
+ struct circ_buf *xmit = &uart->state->xmit;
+ unsigned long flags;
+ unsigned i, len;
+ int txlvl;
+
+ if (chan->uart.x_char && chan->lsr & UART_LSR_THRE) {
+ dev_dbg(&ts->spi->dev, " tx: x-char\n");
+ sc16is7x2_write(ts, UART_TX, ch, uart->x_char);
+ uart->icount.tx++;
+ uart->x_char = 0;
+ return;
+ }
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&chan->uart))
+ /* No data to send or TX is stopped */
+ return;
+
+ txlvl = sc16is7x2_read(ts, REG_TXLVL, ch);
+ if (txlvl <= 0) {
+ dev_dbg(&ts->spi->dev, " %s (%i) fifo full\n", __func__, ch);
+ return;
+ }
+
+ /* number of bytes to transfer to the fifo */
+ len = min(txlvl, (int)uart_circ_chars_pending(xmit));
+
+ dev_dbg(&ts->spi->dev, " %s (%i) %d bytes\n", __func__, ch, len);
+
+ spin_lock_irqsave(&uart->lock, flags);
+ for (i = 1; i <= len ; i++) {
+ chan->buf[i] = xmit->buf[xmit->tail];
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ }
+ uart->icount.tx += len;
+ spin_unlock_irqrestore(&uart->lock, flags);
+
+ chan->buf[0] = write_cmd(UART_TX, ch);
+ if (spi_write(ts->spi, chan->buf, len + 1))
+ dev_err(&ts->spi->dev, " SPI transfer TX handling failed\n");
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(uart);
+}
+
+static void sc16is7x2_handle_baud(struct sc16is7x2_chip *ts, unsigned ch)
+{
+ struct sc16is7x2_channel *chan = &ts->channel[ch];
+
+ if (!chan->handle_baud)
+ return;
+
+ dev_dbg(&ts->spi->dev, "%s\n", __func__);
+
+ sc16is7x2_write(ts, UART_IER, ch, 0);
+ sc16is7x2_write(ts, UART_LCR, ch, UART_LCR_DLAB); /* access DLL&DLM */
+ sc16is7x2_write(ts, UART_DLL, ch, chan->quot & 0xff);
+ sc16is7x2_write(ts, UART_DLM, ch, chan->quot >> 8);
+ sc16is7x2_write(ts, UART_LCR, ch, chan->lcr); /* reset DLAB */
+
+ chan->handle_baud = false;
+}
+
+static void sc16is7x2_handle_regs(struct sc16is7x2_chip *ts, unsigned ch)
+{
+ struct sc16is7x2_channel *chan = &ts->channel[ch];
+
+ if (!chan->handle_regs)
+ return;
+
+ dev_dbg(&ts->spi->dev, "%s\n", __func__);
+
+ sc16is7x2_write(ts, UART_LCR, ch, 0xBF); /* access EFR */
+ sc16is7x2_write(ts, UART_EFR, ch, chan->efr);
+ sc16is7x2_write(ts, UART_LCR, ch, chan->lcr);
+ sc16is7x2_write(ts, UART_FCR, ch, chan->fcr);
+ sc16is7x2_write(ts, UART_MCR, ch, chan->mcr);
+ sc16is7x2_write(ts, UART_IER, ch, chan->ier);
+
+ chan->handle_regs = false;
+}
+
+static void sc16is7x2_read_status(struct sc16is7x2_chip *ts, unsigned ch)
+{
+ struct sc16is7x2_channel *chan = &(ts->channel[ch]);
+/* struct spi_message m;
+ struct spi_transfer t;
+ u8 *buf = chan->buf; */
+ u8 ier;
+
+#ifdef DEBUG
+ ier = sc16is7x2_read(ts, UART_IER, ch);
+#endif
+ chan->iir = sc16is7x2_read(ts, UART_IIR, ch);
+ chan->msr = sc16is7x2_read(ts, UART_MSR, ch);
+ chan->lsr = sc16is7x2_read(ts, UART_LSR, ch);
+/*
+ buf[0] = read_cmd(UART_IER, ch);
+ buf[1] = read_cmd(UART_IIR, ch);
+ buf[2] = read_cmd(UART_MSR, ch);
+ buf[3] = read_cmd(UART_LSR, ch);
+
+ t.tx_buf = buf;
+ t.rx_buf = &buf[16];
+ t.len = 5;
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t, &m);
+ spi_sync(ts->spi, &m); */
+
+ dev_dbg(&ts->spi->dev, " %s ier=0x%02x iir=0x%02x msr=0x%02x lsr=0x%02x\n",
+ __func__, ier, chan->iir, chan->msr, chan->lsr);
+/*
+ dev_dbg(&ts->spi->dev, " %s ier=0x%02x iir=0x%02x msr=0x%02x lsr=0x%02x\n",
+ __func__, buf[17], buf[18], buf[19], buf[20]);
+*/
+}
+
+static void sc16is7x2_handle_channel(struct work_struct *w)
+{
+ struct sc16is7x2_channel *chan =
+ container_of(w, struct sc16is7x2_channel, work);
+ struct sc16is7x2_chip *ts = chan->chip;
+ unsigned ch = (chan == ts->channel) ? 0 : 1;
+
+#ifdef DEBUG
+ dev_dbg(&ts->spi->dev, "%s (%i) %s\n", __func__, ch,
+ chan->handle_irq ? "irq" : "");
+ chan->handle_irq = false;
+#endif
+
+ do {
+ sc16is7x2_handle_baud(ts, ch);
+ sc16is7x2_handle_regs(ts, ch);
+
+ sc16is7x2_read_status(ts, ch);
+ sc16is7x2_handle_tx(ts, ch);
+ sc16is7x2_handle_rx(ts, ch);
+ } while (!(chan->iir & UART_IIR_NO_INT));
+
+ dev_dbg(&ts->spi->dev, "%s finished\n", __func__);
+}
+
+/* Trigger work thread*/
+static void sc16is7x2_dowork(struct sc16is7x2_channel *chan)
+{
+ if (!freezing(current))
+ queue_work(chan->workqueue, &chan->work);
+}
+
+static irqreturn_t sc16is7x2_irq(int irq, void *data)
+{
+ struct sc16is7x2_channel *chan = data;
+
+#ifdef DEBUG
+ /* Indicate irq */
+ chan->handle_irq = true;
+#endif
+
+ /* Trigger work thread */
+ sc16is7x2_dowork(chan);
+
+ return IRQ_HANDLED;
+}
+
+/* ******************************** UART ********************************* */
+
+#define to_sc16is7x2_channel(port) \
+ container_of(port, struct sc16is7x2_channel, uart)
+
+
+static unsigned int sc16is7x2_tx_empty(struct uart_port *port)
+{
+ struct sc16is7x2_channel *chan = to_sc16is7x2_channel(port);
+ struct sc16is7x2_chip *ts = chan->chip;
+ unsigned lsr;
+
+ dev_dbg(&ts->spi->dev, "%s = %s\n", __func__,
+ chan->lsr & UART_LSR_TEMT ? "yes" : "no");
+
+ lsr = chan->lsr;
+ return lsr & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int sc16is7x2_get_mctrl(struct uart_port *port)
+{
+ struct sc16is7x2_channel *chan = to_sc16is7x2_channel(port);
+ struct sc16is7x2_chip *ts = chan->chip;
+ unsigned int status;
+ unsigned int ret;
+
+ dev_dbg(&ts->spi->dev, "%s (0x%02x)\n", __func__, chan->msr);
+
+ status = chan->msr;
+
+ ret = 0;
+ if (status & UART_MSR_DCD)
+ ret |= TIOCM_CAR;
+ if (status & UART_MSR_RI)
+ ret |= TIOCM_RNG;
+ if (status & UART_MSR_DSR)
+ ret |= TIOCM_DSR;
+ if (status & UART_MSR_CTS)
+ ret |= TIOCM_CTS;
+ return ret;
+}
+
+static void sc16is7x2_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct sc16is7x2_channel *chan = to_sc16is7x2_channel(port);
+ struct sc16is7x2_chip *ts = chan->chip;
+
+ dev_dbg(&ts->spi->dev, "%s (0x%02x)\n", __func__, mctrl);
+
+ /* TODO: set DCD and DSR
+ * CTS/RTS is handled automatically
+ */
+}
+
+static void sc16is7x2_stop_tx(struct uart_port *port)
+{
+ /* Do nothing */
+}
+
+static void sc16is7x2_start_tx(struct uart_port *port)
+{
+ struct sc16is7x2_channel *chan = to_sc16is7x2_channel(port);
+ struct sc16is7x2_chip *ts = chan->chip;
+
+ dev_dbg(&ts->spi->dev, "%s\n", __func__);
+
+ /* Trigger work thread for sending data */
+ sc16is7x2_dowork(chan);
+}
+
+static void sc16is7x2_stop_rx(struct uart_port *port)
+{
+ struct sc16is7x2_channel *chan = to_sc16is7x2_channel(port);
+ struct sc16is7x2_chip *ts = chan->chip;
+
+ dev_dbg(&ts->spi->dev, "%s\n", __func__);
+
+ chan->ier &= ~UART_IER_RLSI;
+ chan->uart.read_status_mask &= ~UART_LSR_DR;
+ chan->handle_regs = true;
+ /* Trigger work thread for doing the actual configuration change */
+ sc16is7x2_dowork(chan);
+}
+
+static void sc16is7x2_enable_ms(struct uart_port *port)
+{
+ struct sc16is7x2_channel *chan = to_sc16is7x2_channel(port);
+ struct sc16is7x2_chip *ts = chan->chip;
+
+ dev_dbg(&ts->spi->dev, "%s\n", __func__);
+
+ chan->ier |= UART_IER_MSI;
+ chan->handle_regs = true;
+ /* Trigger work thread for doing the actual configuration change */
+ sc16is7x2_dowork(chan);
+}
+
+static void sc16is7x2_break_ctl(struct uart_port *port, int break_state)
+{
+ /* We don't support break control yet, do nothing */
+}
+
+static int sc16is7x2_startup(struct uart_port *port)
+{
+ struct sc16is7x2_channel *chan = to_sc16is7x2_channel(port);
+ struct sc16is7x2_chip *ts = chan->chip;
+ unsigned ch = (&ts->channel[1] == chan) ? 1 : 0;
+ unsigned long flags;
+
+ dev_dbg(&ts->spi->dev, "\n%s (%d)\n", __func__, port->line);
+
+ /* Clear the interrupt registers. */
+ sc16is7x2_write(ts, UART_IER, ch, 0);
+ sc16is7x2_read_status(ts, ch);
+
+ /* Initialize work queue */
+ chan->workqueue = create_freezeable_workqueue("sc16is7x2");
+ if (!chan->workqueue) {
+ dev_err(&ts->spi->dev, "Workqueue creation failed\n");
+ return -EBUSY;
+ }
+ INIT_WORK(&chan->work, sc16is7x2_handle_channel);
+
+ /* Setup IRQ. Actually we have a low active IRQ, but we want
+ * one shot behaviour */
+ if (request_irq(ts->spi->irq, sc16is7x2_irq,
+ IRQF_TRIGGER_FALLING | IRQF_SHARED,
+ "sc16is7x2", chan)) {
+ dev_err(&ts->spi->dev, "IRQ request failed\n");
+ destroy_workqueue(chan->workqueue);
+ chan->workqueue = NULL;
+ return -EBUSY;
+ }
+
+
+ spin_lock_irqsave(&chan->uart.lock, flags);
+ chan->lcr = UART_LCR_WLEN8;
+ chan->mcr = 0;
+ chan->fcr = 0;
+ chan->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI;
+ spin_unlock_irqrestore(&chan->uart.lock, flags);
+
+ sc16is7x2_write(ts, UART_FCR, ch, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ sc16is7x2_write(ts, UART_FCR, ch, chan->fcr);
+ /* Now, initialize the UART */
+ sc16is7x2_write(ts, UART_LCR, ch, chan->lcr);
+ sc16is7x2_write(ts, UART_MCR, ch, chan->mcr);
+ sc16is7x2_write(ts, UART_IER, ch, chan->ier);
+
+ return 0;
+}
+
+static void sc16is7x2_shutdown(struct uart_port *port)
+{
+ struct sc16is7x2_channel *chan = to_sc16is7x2_channel(port);
+ struct sc16is7x2_chip *ts = chan->chip;
+ unsigned long flags;
+ unsigned ch = port->line & 0x01;
+
+ dev_dbg(&ts->spi->dev, "%s\n", __func__);
+
+ BUG_ON(!chan);
+ BUG_ON(!ts);
+
+ /* Free the interrupt */
+ free_irq(ts->spi->irq, chan);
+
+ if (chan->workqueue) {
+ /* Flush and destroy work queue */
+ flush_workqueue(chan->workqueue);
+ destroy_workqueue(chan->workqueue);
+ chan->workqueue = NULL;
+ }
+
+ /* Suspend HW */
+ spin_lock_irqsave(&chan->uart.lock, flags);
+ chan->ier = UART_IERX_SLEEP;
+ spin_unlock_irqrestore(&chan->uart.lock, flags);
+ sc16is7x2_write(ts, UART_IER, ch, chan->ier);
+}
+
+static void
+sc16is7x2_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct sc16is7x2_channel *chan = to_sc16is7x2_channel(port);
+ struct sc16is7x2_chip *ts = chan->chip;
+ unsigned long flags;
+ unsigned int baud;
+ u8 lcr, fcr = 0;
+
+ /* Ask the core to calculate the divisor for us. */
+ baud = uart_get_baud_rate(port, termios, old,
+ port->uartclk / 16 / 0xffff,
+ port->uartclk / 16);
+ chan->quot = uart_get_divisor(port, baud);
+ chan->handle_baud = true;
+
+ dev_dbg(&ts->spi->dev, "%s (baud %u)\n", __func__, baud);
+
+ /* set word length */
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ lcr = UART_LCR_WLEN5;
+ break;
+ case CS6:
+ lcr = UART_LCR_WLEN6;
+ break;
+ case CS7:
+ lcr = UART_LCR_WLEN7;
+ break;
+ default:
+ case CS8:
+ lcr = UART_LCR_WLEN8;
+ break;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ lcr |= UART_LCR_STOP;
+ if (termios->c_cflag & PARENB)
+ lcr |= UART_LCR_PARITY;
+ if (!(termios->c_cflag & PARODD))
+ lcr |= UART_LCR_EPAR;
+#ifdef CMSPAR
+ if (termios->c_cflag & CMSPAR)
+ lcr |= UART_LCR_SPAR;
+#endif
+
+ fcr = UART_FCR_ENABLE_FIFO;
+ /* configure the fifo */
+ if (baud < 2400)
+ fcr |= UART_FCR_TRIGGER_1;
+ else
+ fcr |= UART_FCR_R_TRIG_01 | UART_FCR_T_TRIG_10;
+
+ chan->efr = UART_EFR_ECB;
+ chan->mcr |= UART_MCR_RTS;
+ if (termios->c_cflag & CRTSCTS)
+ chan->efr |= UART_EFR_CTS | UART_EFR_RTS;
+
+ /*
+ * Ok, we're now changing the port state. Do it with
+ * interrupts disabled.
+ */
+ spin_lock_irqsave(&chan->uart.lock, flags);
+
+ /* we are sending char from a workqueue so enable */
+ chan->uart.state->port.tty->low_latency = 1;
+
+ /* Update the per-port timeout. */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ chan->uart.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+ if (termios->c_iflag & INPCK)
+ chan->uart.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ chan->uart.read_status_mask |= UART_LSR_BI;
+
+ /* Characters to ignore */
+ chan->uart.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ chan->uart.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
+ if (termios->c_iflag & IGNBRK) {
+ chan->uart.ignore_status_mask |= UART_LSR_BI;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ chan->uart.ignore_status_mask |= UART_LSR_OE;
+ }
+
+ /* ignore all characters if CREAD is not set */
+ if ((termios->c_cflag & CREAD) == 0)
+ chan->uart.ignore_status_mask |= UART_LSR_DR;
+
+ /* CTS flow control flag and modem status interrupts */
+ chan->ier &= ~UART_IER_MSI;
+ if (UART_ENABLE_MS(&chan->uart, termios->c_cflag))
+ chan->ier |= UART_IER_MSI;
+
+ chan->lcr = lcr; /* Save LCR */
+ chan->fcr = fcr; /* Save FCR */
+ chan->handle_regs = true;
+
+ spin_unlock_irqrestore(&chan->uart.lock, flags);
+
+ /* Trigger work thread for doing the actual configuration change */
+ sc16is7x2_dowork(chan);
+}
+
+static const char * sc16is7x2_type(struct uart_port *port)
+{
+ pr_debug("%s\n", __func__);
+ return TYPE_NAME;
+}
+
+static void sc16is7x2_release_port(struct uart_port *port)
+{
+ pr_debug("%s\n", __func__);
+}
+
+static int sc16is7x2_request_port(struct uart_port *port)
+{
+ pr_debug("%s\n", __func__);
+ return 0;
+}
+
+static void sc16is7x2_config_port(struct uart_port *port, int flags)
+{
+ struct sc16is7x2_channel *chan = to_sc16is7x2_channel(port);
+ struct sc16is7x2_chip *ts = chan->chip;
+
+ dev_dbg(&ts->spi->dev, "%s\n", __func__);
+ if (flags & UART_CONFIG_TYPE)
+ chan->uart.type = PORT_SC16IS7X2;
+}
+
+static int
+sc16is7x2_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ if (ser->type == PORT_UNKNOWN || ser->type == PORT_SC16IS7X2)
+ return 0;
+
+ return -EINVAL;
+}
+
+static struct uart_ops sc16is7x2_uart_ops = {
+ .tx_empty = sc16is7x2_tx_empty,
+ .set_mctrl = sc16is7x2_set_mctrl,
+ .get_mctrl = sc16is7x2_get_mctrl,
+ .stop_tx = sc16is7x2_stop_tx,
+ .start_tx = sc16is7x2_start_tx,
+ .stop_rx = sc16is7x2_stop_rx,
+ .enable_ms = sc16is7x2_enable_ms,
+ .break_ctl = sc16is7x2_break_ctl,
+ .startup = sc16is7x2_startup,
+ .shutdown = sc16is7x2_shutdown,
+ .set_termios = sc16is7x2_set_termios,
+ .type = sc16is7x2_type,
+ .release_port = sc16is7x2_release_port,
+ .request_port = sc16is7x2_request_port,
+ .config_port = sc16is7x2_config_port,
+ .verify_port = sc16is7x2_verify_port,
+};
+
+
+/* ******************************** GPIO ********************************* */
+
+#ifdef CONFIG_GPIOLIB
+
+static int sc16is7x2_gpio_request(struct gpio_chip *gpio, unsigned offset)
+{
+ struct sc16is7x2_chip *ts =
+ container_of(gpio, struct sc16is7x2_chip, gpio);
+ int control = (offset < 4) ? IOC_GPIO30 : IOC_GPIO74;
+ int ret = 0;
+
+ BUG_ON(offset > 8);
+ dev_dbg(&ts->spi->dev, "%s: offset = %d\n", __func__, offset);
+
+ mutex_lock(&ts->io_lock);
+
+ /* GPIO 0:3 and 4:7 can only be controlled as block */
+ ts->io_gpio |= BIT(offset);
+ if (ts->io_control & control) {
+ dev_dbg(&ts->spi->dev, "activate GPIOs %s\n",
+ (offset < 4) ? "0-3" : "4-7");
+ ts->io_control &= ~control;
+ ret = sc16is7x2_write(ts, REG_IOC, 0, ts->io_control);
+ }
+
+ mutex_unlock(&ts->io_lock);
+
+ return ret;
+}
+
+static void sc16is7x2_gpio_free(struct gpio_chip *gpio, unsigned offset)
+{
+ struct sc16is7x2_chip *ts =
+ container_of(gpio, struct sc16is7x2_chip, gpio);
+ int control = (offset < 4) ? IOC_GPIO30 : IOC_GPIO74;
+ int mask = (offset < 4) ? 0x0f : 0xf0;
+
+ BUG_ON(offset > 8);
+
+ mutex_lock(&ts->io_lock);
+
+ /* GPIO 0:3 and 4:7 can only be controlled as block */
+ ts->io_gpio &= ~BIT(offset);
+ dev_dbg(&ts->spi->dev, "%s: io_gpio = 0x%02X\n", __func__, ts->io_gpio);
+ if (!(ts->io_control & control) && !(ts->io_gpio & mask)) {
+ dev_dbg(&ts->spi->dev, "deactivate GPIOs %s\n",
+ (offset < 4) ? "0-3" : "4-7");
+ ts->io_control |= control;
+ sc16is7x2_write(ts, REG_IOC, 0, ts->io_control);
+ }
+
+ mutex_unlock(&ts->io_lock);
+}
+
+static int sc16is7x2_direction_input(struct gpio_chip *gpio, unsigned offset)
+{
+ struct sc16is7x2_chip *ts =
+ container_of(gpio, struct sc16is7x2_chip, gpio);
+ unsigned io_dir;
+
+ BUG_ON(offset > 8);
+
+ mutex_lock(&ts->io_lock);
+
+ ts->io_dir &= ~BIT(offset);
+ io_dir = ts->io_dir;
+
+ mutex_unlock(&ts->io_lock);
+
+ return sc16is7x2_write(ts, REG_IOD, 0, io_dir);
+}
+
+static int sc16is7x2_direction_output(struct gpio_chip *gpio, unsigned offset,
+ int value)
+{
+ struct sc16is7x2_chip *ts =
+ container_of(gpio, struct sc16is7x2_chip, gpio);
+
+ BUG_ON(offset > 8);
+
+ mutex_lock(&ts->io_lock);
+
+ if (value)
+ ts->io_state |= BIT(offset);
+ else
+ ts->io_state &= ~BIT(offset);
+
+ ts->io_dir |= BIT(offset);
+
+ mutex_unlock(&ts->io_lock);
+
+ sc16is7x2_write(ts, REG_IOS, 0, ts->io_state);
+ return sc16is7x2_write(ts, REG_IOD, 0, ts->io_dir);
+}
+
+static int sc16is7x2_get(struct gpio_chip *gpio, unsigned offset)
+{
+ struct sc16is7x2_chip *ts =
+ container_of(gpio, struct sc16is7x2_chip, gpio);
+ int level = -EINVAL;
+
+ BUG_ON(offset > 8);
+
+ mutex_lock(&ts->io_lock);
+
+ if (ts->io_dir & BIT(offset)) {
+ /* Output: return cached level */
+ level = (ts->io_state >> offset) & 0x01;
+ } else {
+ /* Input: read out all pins */
+ level = sc16is7x2_read(ts, REG_IOS, 0);
+ if (level >= 0) {
+ ts->io_state = level;
+ level = (ts->io_state >> offset) & 0x01;
+ }
+ }
+
+ mutex_unlock(&ts->io_lock);
+
+ return level;
+}
+
+static void sc16is7x2_set(struct gpio_chip *gpio, unsigned offset, int value)
+{
+ struct sc16is7x2_chip *ts =
+ container_of(gpio, struct sc16is7x2_chip, gpio);
+ unsigned io_state;
+
+ BUG_ON(offset > 8);
+
+ mutex_lock(&ts->io_lock);
+
+ if (value)
+ ts->io_state |= BIT(offset);
+ else
+ ts->io_state &= ~BIT(offset);
+ io_state = ts->io_state;
+
+ mutex_unlock(&ts->io_lock);
+
+ sc16is7x2_write(ts, REG_IOS, 0, io_state);
+}
+
+#endif /* CONFIG_GPIOLIB */
+
+/* ******************************** INIT ********************************* */
+
+static struct uart_driver sc16is7x2_uart_driver;
+
+static int sc16is7x2_register_gpio(struct sc16is7x2_chip *ts,
+ struct sc16is7x2_platform_data *pdata)
+{
+#ifdef CONFIG_GPIOLIB
+ ts->gpio.label = (pdata->label) ? pdata->label : DRIVER_NAME;
+ ts->gpio.request = sc16is7x2_gpio_request;
+ ts->gpio.free = sc16is7x2_gpio_free;
+ ts->gpio.get = sc16is7x2_get;
+ ts->gpio.set = sc16is7x2_set;
+ ts->gpio.direction_input = sc16is7x2_direction_input;
+ ts->gpio.direction_output = sc16is7x2_direction_output;
+
+ ts->gpio.base = pdata->gpio_base;
+ ts->gpio.names = pdata->names;
+ ts->gpio.ngpio = SC16IS7X2_NR_GPIOS;
+ ts->gpio.can_sleep = 1;
+ ts->gpio.dev = &ts->spi->dev;
+ ts->gpio.owner = THIS_MODULE;
+
+ mutex_init(&ts->io_lock);
+
+ /* disable all GPIOs, enable on request */
+ ts->io_gpio = 0;
+ ts->io_control = IOC_GPIO30 | IOC_GPIO74;
+ ts->io_state = 0;
+ ts->io_dir = 0;
+
+ sc16is7x2_write(ts, REG_IOI, 0, 0); /* no support for irqs yet */
+ sc16is7x2_write(ts, REG_IOC, 0, ts->io_control);
+ sc16is7x2_write(ts, REG_IOS, 0, ts->io_state);
+ sc16is7x2_write(ts, REG_IOD, 0, ts->io_dir);
+
+ return gpiochip_add(&ts->gpio);
+#else
+ return 0;
+#endif
+}
+
+static int sc16is7x2_register_uart_port(struct sc16is7x2_chip *ts,
+ struct sc16is7x2_platform_data *pdata, unsigned ch)
+{
+ struct sc16is7x2_channel *chan = &(ts->channel[ch]);
+ struct uart_port *uart = &chan->uart;
+
+ /* Disable irqs and go to sleep */
+ sc16is7x2_write(ts, UART_IER, ch, UART_IERX_SLEEP);
+
+ chan->chip = ts;
+
+ uart->irq = ts->spi->irq;
+ uart->uartclk = pdata->uartclk;
+ uart->fifosize = FIFO_SIZE;
+ uart->ops = &sc16is7x2_uart_ops;
+ uart->flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
+ uart->line = pdata->uart_base + ch;
+ uart->type = PORT_SC16IS7X2;
+ uart->dev = &ts->spi->dev;
+
+ return uart_add_one_port(&sc16is7x2_uart_driver, uart);
+}
+
+static int __devinit sc16is7x2_probe(struct spi_device *spi)
+{
+ struct sc16is7x2_chip *ts;
+ struct sc16is7x2_platform_data *pdata;
+ int ret;
+
+ /* Only even uart base numbers are supported */
+ pdata = spi->dev.platform_data;
+ if (!pdata || !pdata->gpio_base || pdata->uart_base & 1) {
+ dev_dbg(&spi->dev, "incorrect or missing platform data\n");
+ return -EINVAL;
+ }
+
+ ts = kzalloc(sizeof(struct sc16is7x2_chip), GFP_KERNEL);
+ if (!ts)
+ return -ENOMEM;
+
+ spi_set_drvdata(spi, ts);
+ ts->spi = spi;
+
+ /* Reset the chip */
+ sc16is7x2_write(ts, REG_IOC, 0, IOC_SRESET);
+
+ ret = sc16is7x2_register_uart_port(ts, pdata, 0);
+ if (ret)
+ goto exit_destroy;
+ ret = sc16is7x2_register_uart_port(ts, pdata, 1);
+ if (ret)
+ goto exit_uart0;
+
+ ret = sc16is7x2_register_gpio(ts, pdata);
+ if (ret)
+ goto exit_uart1;
+
+ dev_info(&spi->dev, DRIVER_NAME " at CS%d (irq %d), 2 UARTs, 8 GPIOs\n"
+ " eser%d, eser%d, gpiochip%d\n",
+ spi->chip_select, spi->irq,
+ pdata->uart_base, pdata->uart_base + 1,
+ pdata->gpio_base);
+
+ return 0;
+
+exit_uart1:
+ uart_remove_one_port(&sc16is7x2_uart_driver, &ts->channel[1].uart);
+
+exit_uart0:
+ uart_remove_one_port(&sc16is7x2_uart_driver, &ts->channel[0].uart);
+
+exit_destroy:
+ dev_set_drvdata(&spi->dev, NULL);
+ kfree(ts);
+ return ret;
+}
+
+static int __devexit sc16is7x2_remove(struct spi_device *spi)
+{
+ struct sc16is7x2_chip *ts = spi_get_drvdata(spi);
+ int ret;
+
+ if (ts == NULL)
+ return -ENODEV;
+
+ ret = uart_remove_one_port(&sc16is7x2_uart_driver, &ts->channel[0].uart);
+ if (ret)
+ return ret;
+
+ ret = uart_remove_one_port(&sc16is7x2_uart_driver, &ts->channel[1].uart);
+ if (ret)
+ return ret;
+
+#ifdef CONFIG_GPIOLIB
+ ret = gpiochip_remove(&ts->gpio);
+ if (ret)
+ return ret;
+#endif
+
+ kfree(ts);
+
+ return 0;
+}
+
+static struct uart_driver sc16is7x2_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = DRIVER_NAME,
+ .dev_name = "eser",
+ .nr = MAX_SC16IS7X2,
+};
+
+/* Spi driver data */
+static struct spi_driver sc16is7x2_spi_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = sc16is7x2_probe,
+ .remove = __devexit_p(sc16is7x2_remove),
+};
+
+/* Driver init function */
+static int __init sc16is7x2_init(void)
+{
+ int ret = uart_register_driver(&sc16is7x2_uart_driver);
+ if (ret)
+ return ret;
+
+ return spi_register_driver(&sc16is7x2_spi_driver);
+}
+
+/* Driver exit function */
+static void __exit sc16is7x2_exit(void)
+{
+ spi_unregister_driver(&sc16is7x2_spi_driver);
+ uart_unregister_driver(&sc16is7x2_uart_driver);
+}
+
+/* register after spi postcore initcall and before
+ * subsys initcalls that may rely on these GPIOs
+ */
+subsys_initcall(sc16is7x2_init);
+module_exit(sc16is7x2_exit);
+
+MODULE_AUTHOR("Manuel Stahl");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("SC16IS7x2 SPI based UART chip");
+MODULE_ALIAS("spi:" DRIVER_NAME);
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index a23fa29..28b9e85 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -45,7 +45,8 @@
#define PORT_OCTEON 17 /* Cavium OCTEON internal UART */
#define PORT_AR7 18 /* Texas Instruments AR7 internal UART */
#define PORT_U6_16550A 19 /* ST-Ericsson U6xxx internal UART */
-#define PORT_MAX_8250 19 /* max port ID */
+#define PORT_SC16IS7X2 20 /* SC16IS7x2 SPI UART */
+#define PORT_MAX_8250 20 /* max port ID */

/*
* ARM specific type numbers. These are not currently guaranteed
@@ -202,6 +203,9 @@
/* VIA VT8500 SoC */
#define PORT_VT8500 97

+/* SC16IS7x2 SPI UART */
+#define PORT_SC16IS7X2 98
+
#ifdef __KERNEL__

#include <linux/compiler.h>
diff --git a/include/linux/serial_sc16is7x2.h b/include/linux/serial_sc16is7x2.h
new file mode 100755
index 0000000..931fe50
--- /dev/null
+++ b/include/linux/serial_sc16is7x2.h
@@ -0,0 +1,17 @@
+#ifndef LINUX_SPI_SC16IS752_H
+#define LINUX_SPI_SC16IS752_H
+
+#define SC16IS7X2_NR_GPIOS 8
+
+struct sc16is7x2_platform_data {
+ unsigned int uartclk;
+ /* uart line number of the first channel */
+ unsigned uart_base;
+ /* number assigned to the first GPIO */
+ unsigned gpio_base;
+ char *label;
+ /* list of GPIO names (array length = SC16IS7X2_NR_GPIOS) */
+ const char *const *names;
+};
+
+#endif[unhandled content-type:application/pkcs7-signature]
\
 
 \ /
  Last update: 2011-01-07 16:23    [W:0.096 / U:0.700 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site