lkml.org 
[lkml]   [2010]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Xen-devel] PROBLEM: [BISECTED] 2.6.35.5 xen domU panics just after the boot
 On 09/23/2010 07:13 PM, Dan Magenheimer wrote:
> Jeremy --
>
> FYI, I think I've also seen this problem, or something similar,
> but ONLY on a Nehalem box (and only intermittently), not on my
> Core 2 Duo boxen. The
> Nehalem box is an SDP so I had assumed that it was something
> to do with that, but maybe not. Maybe some feature is
> "leaking through" to the guest. Hyperthreading? MSI? EPT?
>
> Anyway, if you have a newer box, you might try reproducing
> on that, rather than your usual development box (which IIRC
> was a Core 2 Duo laptop?)

No, this bug turned out to be a simple typo in the patch that got merged
into the upstream stable kernels.

J

>> -----Original Message-----
>> From: Jeremy Fitzhardinge [mailto:jeremy@goop.org]
>> Sent: Thursday, September 23, 2010 6:02 PM
>> To: Pawel Zuzelski
>> Cc: virtualization@lists.osdl.org; Jeremy Fitzhardinge; xen-
>> devel@lists.xensource.com; lkml
>> Subject: Re: [Xen-devel] PROBLEM: [BISECTED] 2.6.35.5 xen domU panics
>> just after the boot
>>
>> On 09/21/2010 12:05 PM, Paweł Zuzelski wrote:
>>> Hello,
>>>
>>> kernels 2.6.35.5 and 2.6.32.22 xen domU panics at the very begining
>> of the
>>> boot process.
>>>
>>> I have bisected it to a single commit, and the first bad commit is:
>>> [fb412a178502dc498430723b082a932f797e4763] xen: use percpu interrupts
>> for IPIs and VIRQs
>>> kernel v2.6.35.5 with reverted this commit works for me.
>> Thanks very much for doing that. I'll have to work out what's going on
>> (obviously it doesn't do it for me).
>>
>> J
>>
>>> Here are the kernel configs I was using:
>>> http://carme.pld-linux.org/~pawelz/kernel-2.6.35.5-domU-config
>>> http://carme.pld-linux.org/~pawelz/kernel-2.6.32.22-domU-config
>>> As you can see they are stripped down configs, intended to run in
>> domU only.
>>> I was testing it with the very simple domU configuration:
>>>
>>> kernel = '/srv/xen/bzImage'
>>> memory = '128'
>>> vcpus = 2
>>> name = 'test'
>>> on_poweroff = 'destroy'
>>> on_reboot = 'restart'
>>> on_crash = 'restart'
>>>
>>> Here is the full output of kernel 2.6.35.5:
>>>
>>> Using config file "/etc/xen/test".
>>> Started domain test
>>> [ 0.000000] Policy zone: DMA32
>>> [ 0.000000] Kernel command line:
>>> [ 0.000000] PID hash table entries: 512 (order: 0, 4096 bytes)
>>> [ 0.000000] Subtract (33 early reservations)
>>> [ 0.000000] #1 [0001976000 - 0001987000] XEN PAGETABLES
>>> [ 0.000000] #2 [0001000000 - 00019125f8] TEXT DATA BSS
>>> [ 0.000000] #3 [0001933000 - 0001976000] XEN START INFO
>>> [ 0.000000] #4 [0000010000 - 0000012000] TRAMPOLINE
>>> [ 0.000000] #5 [0000012000 - 0000040000] PGTABLE
>>> [ 0.000000] #6 [0001912600 - 0001917600] NODE_DATA
>>> [ 0.000000] #7 [0001917600 - 0001918600] BOOTMEM
>>> [ 0.000000] #8 [0001918600 - 0001918618] BOOTMEM
>>> [ 0.000000] #9 [0001919000 - 000191a000] BOOTMEM
>>> [ 0.000000] #10 [000191a000 - 000191b000] BOOTMEM
>>> [ 0.000000] #11 [000191b000 - 000191c000] BOOTMEM
>>> [ 0.000000] #12 [0002200000 - 00023c0000] MEMMAP 0
>>> [ 0.000000] #13 [0001918640 - 00019187c0] BOOTMEM
>>> [ 0.000000] #14 [000191c000 - 000191cc00] BOOTMEM
>>> [ 0.000000] #15 [000191d000 - 000191e000] BOOTMEM
>>> [ 0.000000] #16 [000191e000 - 000191f000] BOOTMEM
>>> [ 0.000000] #17 [000191f000 - 0001920000] BOOTMEM
>>> [ 0.000000] #18 [00019187c0 - 00019188a0] BOOTMEM
>>> [ 0.000000] #19 [00019188c0 - 0001918928] BOOTMEM
>>> [ 0.000000] #20 [0001918940 - 00019189a8] BOOTMEM
>>> [ 0.000000] #21 [00019189c0 - 0001918a28] BOOTMEM
>>> [ 0.000000] #22 [0001918a40 - 0001918a41] BOOTMEM
>>> [ 0.000000] #23 [0001918a80 - 0001918a81] BOOTMEM
>>> [ 0.000000] #24 [0001987000 - 00019c1000] BOOTMEM
>>> [ 0.000000] #25 [0001918ac0 - 0001918ac8] BOOTMEM
>>> [ 0.000000] #26 [0001918b00 - 0001918b08] BOOTMEM
>>> [ 0.000000] #27 [0001918b40 - 0001918b48] BOOTMEM
>>> [ 0.000000] #28 [0001918b80 - 0001918b90] BOOTMEM
>>> [ 0.000000] #29 [0001918bc0 - 0001918cc0] BOOTMEM
>>> [ 0.000000] #30 [0001918cc0 - 0001918d08] BOOTMEM
>>> [ 0.000000] #31 [0001918d40 - 0001918d88] BOOTMEM
>>> [ 0.000000] #32 [0001920000 - 0001921000] BOOTMEM
>>> [ 0.000000] Memory: 118724k/131072k available (3327k kernel code,
>> 448k absent, 11900k reserved, 3931k data, 440k init)
>>> [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3,
>> MinObjects=0, CPUs=2, Nodes=1
>>> [ 0.000000] Hierarchical RCU implementation.
>>> [ 0.000000] RCU-based detection of stalled CPUs is disabled.
>>> [ 0.000000] Verbose stalled-CPUs detection is disabled.
>>> [ 0.000000] NR_IRQS:2304
>>> [ 0.000000] Console: colour dummy device 80x25
>>> [ 0.000000] console [tty0] enabled
>>> [ 0.000000] console [hvc0] enabled
>>> [ 0.000000] installing Xen timer for CPU 0
>>> [ 0.000000] BUG: unable to handle kernel NULL pointer dereference
>> at (null)
>>> [ 0.000000] IP: [<(null)>] (null)
>>> [ 0.000000] PGD 0
>>> [ 0.000000] Oops: 0010 [#1] SMP
>>> [ 0.000000] last sysfs file:
>>> [ 0.000000] CPU 0
>>> [ 0.000000] Modules linked in:
>>> [ 0.000000]
>>> [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.35.5 #1 /
>>> [ 0.000000] RIP: e030:[<0000000000000000>] [<(null)>] (null)
>>> [ 0.000000] RSP: e02b:ffffffff81601d70 EFLAGS: 00010082
>>> [ 0.000000] RAX: ffffffff818fdb50 RBX: 0000000000000000 RCX:
>> 0000000000000000
>>> [ 0.000000] RDX: 0000000000000000 RSI: ffffffff818c7958 RDI:
>> 0000000000000000
>>> [ 0.000000] RBP: ffffffff81601d88 R08: ffffea00001b22d8 R09:
>> 000000000000001a
>>> [ 0.000000] R10: 0000000000000000 R11: 0000000000006477 R12:
>> ffffffff81623280
>>> [ 0.000000] R13: 0000000000000000 R14: 00000000ffffffea R15:
>> 0000000000000000
>>> [ 0.000000] FS: 0000000000000000(0000) GS:ffff880001987000(0000)
>> knlGS:0000000000000000
>>> [ 0.000000] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
>>> [ 0.000000] CR2: 0000000000000000 CR3: 00000000016b9000 CR4:
>> 0000000000002620
>>> [ 0.000000] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
>> 0000000000000000
>>> [ 0.000000] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
>> 0000000000000400
>>> [ 0.000000] Process swapper (pid: 0, threadinfo ffffffff81600000,
>> task ffffffff816c1020)
>>> [ 0.000000] Stack:
>>> [ 0.000000] ffffffff8107c849 0000000000000000 ffff880007c0d000
>> ffffffff81601da8
>>> [ 0.000000] <0> ffffffff8107c829 ffffffff8133d3fb ffffffff81623280
>> ffffffff81601df8
>>> [ 0.000000] <0> ffffffff8107c033 ffffffff816202e4 ffffffff816232e4
>> ffffffff8100572f
>>> [ 0.000000] Call Trace:
>>> [ 0.000000] [<ffffffff8107c849>] ? default_enable+0x1a/0x28
>>> [ 0.000000] [<ffffffff8107c829>] default_startup+0x19/0x1f
>>> [ 0.000000] [<ffffffff8133d3fb>] ?
>> _raw_spin_lock_irqsave+0xd/0x24
>>> [ 0.000000] [<ffffffff8107c033>] __setup_irq+0x1ab/0x2d8
>>> [ 0.000000] [<ffffffff8100572f>] ?
>> xen_restore_fl_direct_end+0x0/0x1
>>> [ 0.000000] [<ffffffff810052bb>] ? xen_timer_interrupt+0x0/0x17a
>>> [ 0.000000] [<ffffffff8107c278>] request_threaded_irq+0x118/0x146
>>> [ 0.000000] [<ffffffff8125dda5>]
>> bind_virq_to_irqhandler+0x146/0x168
>>> [ 0.000000] [<ffffffff810052bb>] ? xen_timer_interrupt+0x0/0x17a
>>> [ 0.000000] [<ffffffff810055ee>] xen_setup_timer+0x59/0x9d
>>> [ 0.000000] [<ffffffff81731b68>] xen_time_init+0x7b/0x89
>>> [ 0.000000] [<ffffffff81731ead>] x86_late_time_init+0xa/0x11
>>> [ 0.000000] [<ffffffff8172eb49>] start_kernel+0x30b/0x38d
>>> [ 0.000000] [<ffffffff8172e2c6>]
>> x86_64_start_reservations+0xb1/0xb5
>>> [ 0.000000] [<ffffffff817313e8>] xen_start_kernel+0x508/0x50f
>>> [ 0.000000] Code: Bad RIP value.
>>> [ 0.000000] RIP [<(null)>] (null)
>>> [ 0.000000] RSP <ffffffff81601d70>
>>> [ 0.000000] CR2: 0000000000000000
>>> [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
>>> [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle
>> task!
>>> [ 0.000000] Pid: 0, comm: swapper Tainted: G D 2.6.35.5
>> #1
>>> [ 0.000000] Call Trace:
>>> [ 0.000000] [<ffffffff8133bae9>] panic+0x86/0xfa
>>> [ 0.000000] [<ffffffff8103c5c6>] do_exit+0x6d/0x77e
>>> [ 0.000000] [<ffffffff8133d43f>] ?
>> _raw_spin_unlock_irqrestore+0x11/0x13
>>> [ 0.000000] [<ffffffff8103ac55>] ? kmsg_dump+0x11e/0x139
>>> [ 0.000000] [<ffffffff8100b936>] oops_end+0x8f/0x94
>>> [ 0.000000] [<ffffffff810239cc>] no_context+0x1f4/0x203
>>> [ 0.000000] [<ffffffff81023b65>]
>> __bad_area_nosemaphore+0x18a/0x1ad
>>> [ 0.000000] [<ffffffff81023b96>] bad_area_nosemaphore+0xe/0x10
>>> [ 0.000000] [<ffffffff81023f10>] do_page_fault+0x115/0x229
>>> [ 0.000000] [<ffffffff8133daf5>] page_fault+0x25/0x30
>>> [ 0.000000] [<ffffffff8107c849>] ? default_enable+0x1a/0x28
>>> [ 0.000000] [<ffffffff8107c829>] default_startup+0x19/0x1f
>>> [ 0.000000] [<ffffffff8133d3fb>] ?
>> _raw_spin_lock_irqsave+0xd/0x24
>>> [ 0.000000] [<ffffffff8107c033>] __setup_irq+0x1ab/0x2d8
>>> [ 0.000000] [<ffffffff8100572f>] ?
>> xen_restore_fl_direct_end+0x0/0x1
>>> [ 0.000000] [<ffffffff810052bb>] ? xen_timer_interrupt+0x0/0x17a
>>> [ 0.000000] [<ffffffff8107c278>] request_threaded_irq+0x118/0x146
>>> [ 0.000000] [<ffffffff8125dda5>]
>> bind_virq_to_irqhandler+0x146/0x168
>>> [ 0.000000] [<ffffffff810052bb>] ? xen_timer_interrupt+0x0/0x17a
>>> [ 0.000000] [<ffffffff810055ee>] xen_setup_timer+0x59/0x9d
>>> [ 0.000000] [<ffffffff81731b68>] xen_time_init+0x7b/0x89
>>> [ 0.000000] [<ffffffff81731ead>] x86_late_time_init+0xa/0x11
>>> [ 0.000000] [<ffffffff8172eb49>] start_kernel+0x30b/0x38d
>>> [ 0.000000] [<ffffffff8172e2c6>]
>> x86_64_start_reservations+0xb1/0xb5
>>> [ 0.000000] [<ffffffff817313e8>] xen_start_kernel+0x508/0x50f
>>>
>>> Additional info:
>>> arch: x86_64
>>> cpu: Intel(R) Xeon(R) CPU E5345 @ 2.33GHz
>>> xen: 3.2.1
>>> dom0: Linux version 2.6.26-2-xen-amd64 (Debian 2.6.26-24lenny1)
>>> (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease)
>>> (Debian 4.1.2-25)) #1 SMP Thu Aug 19 01:12:45 UTC 2010
>>>
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xensource.com
>> http://lists.xensource.com/xen-devel
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2010-09-27 20:09    [W:0.048 / U:1.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site