lkml.org 
[lkml]   [2010]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Subject[RFC] Enhance dev_ioctl to return <hwaddr>:<if_name::if_index> mapping
Date
From
Hello All,

LKML Post:
http://kerneltrap.org/mailarchive/linux-kernel/2010/7/12/4592938


This proposal will provide the ability to shoot an 'ioctl' via an 'ethX'
agnostic naming scheme.

Requirement:
R1)Ability to address NICs/interfaces using a mac-addr in ioctls. This
is required because we don't have a consistent naming scheme for
Ethernet devices.
Asking customers and/or field-engineers to change udev rules and
other config files is not feasible.

Existing pain-points:
P1) ioctl needs either i) if-name or ii) if-index before we can invoke
bind() etc.
This works fine if you know your configuration and it is not going
to change.
However,if we hot-add a NIC and if you have adapters from multiple
vendors(think:driver load order) then upon a reboot,
the 'eth' interfaces can be re-mapped.

Existing work-around(s):
W1) user-apps scan /sys/class/net/ethX/address nodes, grep the hw-addrs
till they find a hwaddr-match and then internally create a hwaddr-ethX
mapping table.
W2) change udev-70..persistent rules file and 'rename' the interfaces
according to your needs.
W2.1) If renaming were to even succeed then none of the existing
drivers re-register their msix-vectors.
NETDEV_RENAME(or _CHANGE ) handler in the driver does not tear down
the interrupts etc.
Some of the sample msix-vectors are as follows : ethX-rx-0,
ethX-rx-1 ... ethX-rx-N
So if the interface is renamed then how do we measure/correlate the
interrupt-count?

But there is no programmatic way of deriving the 'ethX' name. I got a
few offline replies to the above post, asking me to continue using W1)
from above.
Sorry but that was an ugly hack. Also why not replace the get-ioctls to
a 'sys' read everywhere?? ;).

Solution/Proposal:
S1) Introduce a new ioctl(SIOCGHWADDR_TO_IFNAMEINDEX_MAP[or pick your
name])
S1.1) Enhance dev_ioctl to handle this new case.
S1.2 Re-use for_each_netdev_rcu::is_etherdev_addr(this will iterate
through dev_addrs).
By using the above for_each loop we don't need to re-invent the
wheel.

Input(ifr->hw_addr) : output -> if_name and if_index if ifr->hw_addr is
found.

This way an app can first shoot down an ioctl(sock_fd,
SIOCGHWADDR_TO_IFNAMEINDEX_MAP,ifr), where ifr.ifr_hwaddr is populated
w/ the mac_addr whose mapping you would like.
Then once the if_name and if_index is known, using other ioctls is easy.


Please review the proposal and the sample code below. If this is not a
good approach and if there is a simple workaround then please let me
know.


Regards
Chetan Loke


----------------------------------------------------------

Sample code(PS- I used a quick and dirty driver to demonstrate the
concept rather than modifying the kernel)


Copyright NetScout Systems
Chetan Loke <loke.c@alumni.neu.edu>

struct foo {
char name[IFNAMSIZ];
int index;
};

/* shamelessly copied from compare_etherdev */
/* eventually is_etherdev_equal will be called by dev_ioctl */
int ntct_is_etherdev_equal(u16 *a,u16 *b) {
return ((a[0] ^ b[0]) | (a[1] ^ b[1]) | (a[2] ^ b[2])) == 0;
}

/* eventually enhance dev_ioctl */
int _do_ioctl(unsigned long arg) {

struct foo my_foo;
struct net_device *dev;
int ret=0;
int found=0;
int i=0;

/* eventually sent via
ioctl(sock_fd)->SIOCG_HWADDR_TO_NAMEIDX_MAP and ifr->hw_addr */
unsigned char mac_addr[]={0x00,0x50,0x56,0xBB,0x52,0xF7};

/* eventually use rcu_read_lock(); */
read_lock(&dev_base_lock);

/* 2.6.31 doesn't have this defined. eventually use
for_each_netdev_rcu. */
for_each_netdev(&init_net, dev) {
dev_hold(dev);

/* eventually use is_etherdev_addr(addr1,addr2) */
ret = ntct_is_etherdev_equal((u16 *)dev->dev_addr,(u16
*)mac_addr);
if (ret) {
printk("<%s> Found eth-if:%s
ifindex:%d\n",__func__,dev->name,dev->ifindex);
printk("Mac:");
for (i=0;i<ETH_ALEN;i++)
printk("%02x%c",(unsigned
char)dev->dev_addr[i],((i < 5)? ':':' '));
printk("\n");
strcpy(my_foo.name,dev->name);
my_foo.index=dev->ifindex;
dev_put(dev);
found=1;
break;
}
dev_put(dev);
}

/* eventually use rcu_read_unlock(); */
read_unlock(&dev_base_lock);

if (!found) {
printk("<%s> hwaddr<->name mapping not
found\n",__func__);
return -EINVAL;
}

return copy_to_user((char *)arg,&my_foo,sizeof(struct foo)) ?
-EFAULT : 0;
}



\
 
 \ /
  Last update: 2010-07-16 01:13    [W:0.234 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site