lkml.org 
[lkml]   [2010]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: pxa300 - DDRAM base value
Date
Dne Út 1. června 2010 07:44:18 balakrishnan napsal(a):
> I am working on pxa300 based development board and using Linux 2.6.34.
> This Linux kernel already has support for following boards
> 1. zylonite_pxa300
> 2. cm-x300
> 3. colibri-pxa300
> 4. littleton
>
> My doubt is that pxa300 based boards are using "0xa0000000" as DDRAM
> base and PHYS_OFFSET is also defined in
> "arch/arm/mach-pxa/include/mach/memory.h" as 0xa0000000.
> But in our board DDR is mapped in 0x80000000. Does it make any
> problem?. Because after mmu is turned ON, my board is hanging.
>
> "zreladdr-y := 0x80008000" is defined in
> "arch/arm/mach-pxa/Makefile.boot" file .
> my machine_desc is as follows
> .phys_io = 0x40000000,
> .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
> .boot_params = 0x80000100,
>

Try editing both arch/arm/mach-pxa/Makefile.boot and
arch/arm/mach/pxa/include/mach/memory.h

> With Thanks
> J.Balakrishnan

The 0x80000000 should be aliased to 0xa0000000, but looking into the PXA docs,
it is only on pxa320. Eric, any ideas on this ?
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2010-06-05 19:23    [W:0.624 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site