lkml.org 
[lkml]   [2010]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectWARNING: at arch/x86/kernel/hpet.c:404 hpet_next_event+0x57/0x77()
Kernel 2.6.33

[ 1.200658] ------------[ cut here ]------------
[ 1.200662] WARNING: at arch/x86/kernel/hpet.c:404 hpet_next_event+0x57/0x77()
[ 1.200663] Hardware name: P55A-UD4
[ 1.200664] hpet: compare register read back failed.
[ 1.200665] Modules linked in:
[ 1.200666] Pid: 0, comm: swapper Not tainted 2.6.33-p1 #10
[ 1.200668] Call Trace:
[ 1.200671] [<ffffffff8102c98f>] ? warn_slowpath_common+0x76/0x8c
[ 1.200673] [<ffffffff8102c9f7>] ? warn_slowpath_fmt+0x40/0x45
[ 1.200676] [<ffffffff81026166>] ? find_busiest_group+0x341/0x7fe
[ 1.200678] [<ffffffff81018eb1>] ? hpet_next_event+0x57/0x77
[ 1.200681] [<ffffffff81048d1e>] ? tick_dev_program_event+0x33/0x9e
[ 1.200684] [<ffffffff81048836>] ?
tick_broadcast_oneshot_control+0x9c/0xf5
[ 1.200686] [<ffffffff81048220>] ? tick_notify+0x1f9/0x34d
[ 1.200688] [<ffffffff8104257a>] ? notifier_call_chain+0x2e/0x5b
[ 1.200690] [<ffffffff81047c56>] ? clockevents_notify+0x31/0x139
[ 1.200693] [<ffffffff81175aa0>] ? acpi_idle_enter_simple+0x93/0x130
[ 1.200696] [<ffffffff811673c3>] ?
acpi_write_bit_register+0x9e/0xab
[ 1.200698] [<ffffffff8117585c>] ? acpi_idle_enter_bm+0xd3/0x284
[ 1.200701] [<ffffffff811f2705>] ? cpuidle_idle_call+0x89/0xc0
[ 1.200704] [<ffffffff81001256>] ? cpu_idle+0x9d/0xd7
[ 1.200707] ---[ end trace a4e806103d58b3e6 ]---

More info need??
[ 0.000000] Linux version 2.6.33-p1 (pmlopez@debian) (gcc version 4.4.3 (Debian 4.4.3-3) ) #10 SMP Tue Mar 9 21:13:09 CET 2010
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.33-p1 root=/dev/sda3 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000094c00 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfbe0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfbe0000 - 00000000bfbe2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfbe2000 - 00000000bfbf0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfbf0000 - 00000000bfc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CDFFF write-protect
[ 0.000000] CE000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 2 base 100000000 mask F00000000 write-back
[ 0.000000] 3 base 200000000 mask FC0000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbfbe0 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000f5710] f5710
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfbe0000
[ 0.000000] 0000000000 - 00bfa00000 page 2M
[ 0.000000] 00bfa00000 - 00bfbe0000 page 4k
[ 0.000000] kernel direct mapping tables up to bfbe0000 @ 8000-d000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000240000000
[ 0.000000] 0100000000 - 0240000000 page 2M
[ 0.000000] kernel direct mapping tables up to 240000000 @ b000-15000
[ 0.000000] ACPI: RSDP 00000000000f70d0 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000bfbe2040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000bfbe20c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000bfbe2180 0530D (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000bfbe0000 00040
[ 0.000000] ACPI: HPET 00000000bfbe7600 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000bfbe7680 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: EUDS 00000000bfbe76c0 00560 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: TAMG 00000000bfbe7c20 00A32 (v01 GBT GBT B0 5455312E BG?? 53450101)
[ 0.000000] ACPI: APIC 00000000bfbe7500 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 00000000bfbe8660 03404 (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (12 early reservations) ==> bootmem [0000000000 - 0240000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0001000000 - 0001744f28] TEXT DATA BSS ==> [0001000000 - 0001744f28]
[ 0.000000] #2 [0001745000 - 00017450f6] BRK ==> [0001745000 - 00017450f6]
[ 0.000000] #3 [00000f5720 - 0000100000] BIOS reserved ==> [00000f5720 - 0000100000]
[ 0.000000] #4 [00000f5710 - 00000f5720] MP-table mpf ==> [00000f5710 - 00000f5720]
[ 0.000000] #5 [0000094c00 - 00000f0d00] BIOS reserved ==> [0000094c00 - 00000f0d00]
[ 0.000000] #6 [00000f0ef4 - 00000f5710] BIOS reserved ==> [00000f0ef4 - 00000f5710]
[ 0.000000] #7 [00000f0d00 - 00000f0ef4] MP-table mpc ==> [00000f0d00 - 00000f0ef4]
[ 0.000000] #8 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000]
[ 0.000000] #9 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000]
[ 0.000000] #10 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
[ 0.000000] #11 [000000b000 - 0000010000] PGTABLE ==> [000000b000 - 0000010000]
[ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880028600000-ffff88002f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00240000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000094
[ 0.000000] 0: 0x00000100 -> 0x000bfbe0
[ 0.000000] 0: 0x00100000 -> 0x00240000
[ 0.000000] On node 0 totalpages: 2095988
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 121 pages reserved
[ 0.000000] DMA zone: 3811 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 767000 pages, LIFO batch:31
[ 0.000000] Normal zone: 17920 pages used for memmap
[ 0.000000] Normal zone: 1292800 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000094000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfbe0000 - 00000000bfbe2000
[ 0.000000] PM: Registered nosave memory: 00000000bfbe2000 - 00000000bfbf0000
[ 0.000000] PM: Registered nosave memory: 00000000bfbf0000 - 00000000bfc00000
[ 0.000000] PM: Registered nosave memory: 00000000bfc00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at bfc00000 (gap: bfc00000:30400000)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880028200000 s77016 r8192 d21288 u262144
[ 0.000000] pcpu-alloc: s77016 r8192 d21288 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063611
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.33-p1 root=/dev/sda3 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 8181484k/9437184k available (2466k kernel code, 1053232k absent, 201532k reserved, 3911k data, 368k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:472
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 2798.052 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5596.10 BogoMIPS (lpj=2798052)
[ 0.000018] Mount-cache hash table entries: 256
[ 0.000093] CPU: Physical Processor ID: 0
[ 0.000094] CPU: Processor Core ID: 0
[ 0.000097] mce: CPU supports 9 MCE banks
[ 0.000104] CPU0: Thermal monitoring enabled (TM1)
[ 0.000107] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8
[ 0.000111] using mwait in idle threads.
[ 0.000112] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[ 0.000115] ... version: 3
[ 0.000116] ... bit width: 48
[ 0.000117] ... generic registers: 4
[ 0.000118] ... value mask: 0000ffffffffffff
[ 0.000119] ... max period: 000000007fffffff
[ 0.000120] ... fixed-purpose events: 3
[ 0.000121] ... event mask: 000000070000000f
[ 0.000131] ACPI: Core revision 20091214
[ 0.009549] Setting APIC routing to flat
[ 0.009881] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.019856] CPU0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05
[ 0.121323] Booting Node 0, Processors #1
[ 0.192090] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.212106] #2
[ 0.282833] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.302843] #3
[ 0.373575] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.393580] #4
[ 0.464318] CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.484322] #5
[ 0.555059] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.575059] #6
[ 0.645801] CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.665897] #7 Ok.
[ 0.736544] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.756600] Brought up 8 CPUs
[ 0.756601] Total of 8 processors activated (44761.83 BogoMIPS).
[ 0.759122] devtmpfs: initialized
[ 0.759240] NET: Registered protocol family 16
[ 0.759275] ACPI: bus type pci registered
[ 0.759312] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.759314] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.760356] PCI: Using configuration type 1 for base access
[ 0.760742] bio: create slab <bio-0> at 0
[ 0.761319] ACPI: EC: Look up EC in DSDT
[ 0.766363] ACPI: Interpreter enabled
[ 0.766365] ACPI: (supports S0 S3 S4 S5)
[ 0.766379] ACPI: Using IOAPIC for interrupt routing
[ 0.769824] ACPI Warning: Incorrect checksum in table [TAMG] - AF, should be AE (20091214/tbutils-314)
[ 0.769919] ACPI: No dock devices found.
[ 0.769986] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.770000] pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
[ 0.770111] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.770112] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.770114] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.770116] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.770117] pci_root PNP0A03:00: host bridge window [mem 0xbfc00000-0xfebfffff] (ignored)
[ 0.770189] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.770191] pci 0000:00:03.0: PME# disabled
[ 0.770408] pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f]
[ 0.770463] pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f]
[ 0.770519] pci 0000:00:1a.2: reg 20: [io 0xfd00-0xfd1f]
[ 0.770572] pci 0000:00:1a.7: reg 10: [mem 0xfbfff000-0xfbfff3ff]
[ 0.770618] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.770621] pci 0000:00:1a.7: PME# disabled
[ 0.770649] pci 0000:00:1b.0: reg 10: [mem 0xfbff8000-0xfbffbfff 64bit]
[ 0.770683] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.770686] pci 0000:00:1b.0: PME# disabled
[ 0.770740] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.770742] pci 0000:00:1c.0: PME# disabled
[ 0.770798] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.770801] pci 0000:00:1c.3: PME# disabled
[ 0.770856] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.770858] pci 0000:00:1c.4: PME# disabled
[ 0.770913] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.770916] pci 0000:00:1c.5: PME# disabled
[ 0.770971] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.770974] pci 0000:00:1c.6: PME# disabled
[ 0.771015] pci 0000:00:1d.0: reg 20: [io 0xfc00-0xfc1f]
[ 0.771069] pci 0000:00:1d.1: reg 20: [io 0xfb00-0xfb1f]
[ 0.771123] pci 0000:00:1d.2: reg 20: [io 0xfa00-0xfa1f]
[ 0.771176] pci 0000:00:1d.3: reg 20: [io 0xf900-0xf91f]
[ 0.771229] pci 0000:00:1d.7: reg 10: [mem 0xfbffe000-0xfbffe3ff]
[ 0.771275] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.771279] pci 0000:00:1d.7: PME# disabled
[ 0.771421] pci 0000:00:1f.2: reg 10: [io 0xf800-0xf807]
[ 0.771425] pci 0000:00:1f.2: reg 14: [io 0xf700-0xf703]
[ 0.771430] pci 0000:00:1f.2: reg 18: [io 0xf600-0xf607]
[ 0.771434] pci 0000:00:1f.2: reg 1c: [io 0xf500-0xf503]
[ 0.771438] pci 0000:00:1f.2: reg 20: [io 0xf400-0xf41f]
[ 0.771443] pci 0000:00:1f.2: reg 24: [mem 0xfbffd000-0xfbffd7ff]
[ 0.771468] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.771472] pci 0000:00:1f.2: PME# disabled
[ 0.771495] pci 0000:00:1f.3: reg 10: [mem 0xfbffc000-0xfbffc0ff 64bit]
[ 0.771505] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.771539] pci 0000:01:00.0: reg 10: [mem 0xf8000000-0xf8ffffff]
[ 0.771546] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.771553] pci 0000:01:00.0: reg 1c: [mem 0xf6000000-0xf7ffffff 64bit]
[ 0.771557] pci 0000:01:00.0: reg 24: [io 0xaf00-0xaf7f]
[ 0.771561] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.773483] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.773485] pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
[ 0.773488] pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf9ffffff]
[ 0.773491] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.773522] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.773574] pci 0000:03:00.0: reg 10: [mem 0xfbcfe000-0xfbcfffff 64bit]
[ 0.773650] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.773655] pci 0000:03:00.0: PME# disabled
[ 0.775494] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.775498] pci 0000:00:1c.3: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.775575] pci 0000:04:00.0: reg 24: [mem 0xfbafe000-0xfbafffff]
[ 0.775610] pci 0000:04:00.0: PME# supported from D3hot
[ 0.775614] pci 0000:04:00.0: PME# disabled
[ 0.775656] pci 0000:04:00.1: reg 10: [io 0xef00-0xef07]
[ 0.775664] pci 0000:04:00.1: reg 14: [io 0xee00-0xee03]
[ 0.775672] pci 0000:04:00.1: reg 18: [io 0xed00-0xed07]
[ 0.775679] pci 0000:04:00.1: reg 1c: [io 0xec00-0xec03]
[ 0.775687] pci 0000:04:00.1: reg 20: [io 0xeb00-0xeb0f]
[ 0.775742] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.775777] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.775780] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.775783] pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff]
[ 0.775817] pci 0000:05:00.0: reg 10: [io 0xdf00-0xdf07]
[ 0.775823] pci 0000:05:00.0: reg 14: [io 0xde00-0xde03]
[ 0.775830] pci 0000:05:00.0: reg 18: [io 0xdd00-0xdd07]
[ 0.775836] pci 0000:05:00.0: reg 1c: [io 0xdc00-0xdc03]
[ 0.775843] pci 0000:05:00.0: reg 20: [io 0xdb00-0xdb0f]
[ 0.775850] pci 0000:05:00.0: reg 24: [mem 0xfb9ff000-0xfb9ff7ff]
[ 0.775856] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.775886] pci 0000:05:00.0: PME# supported from D3hot
[ 0.775890] pci 0000:05:00.0: PME# disabled
[ 0.777485] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[ 0.777488] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.777491] pci 0000:00:1c.5: bridge window [mem 0xfb900000-0xfb9fffff]
[ 0.777526] pci 0000:06:00.0: reg 10: [io 0xce00-0xceff]
[ 0.777544] pci 0000:06:00.0: reg 18: [mem 0xfbdff000-0xfbdfffff 64bit pref]
[ 0.777556] pci 0000:06:00.0: reg 20: [mem 0xfbdf8000-0xfbdfbfff 64bit pref]
[ 0.777563] pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.777599] pci 0000:06:00.0: supports D1 D2
[ 0.777600] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.777604] pci 0000:06:00.0: PME# disabled
[ 0.779481] pci 0000:00:1c.6: PCI bridge to [bus 06-06]
[ 0.779484] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
[ 0.779487] pci 0000:00:1c.6: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.779491] pci 0000:00:1c.6: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
[ 0.779518] pci 0000:07:03.0: reg 10: [io 0xbf00-0xbf07]
[ 0.779523] pci 0000:07:03.0: reg 14: [io 0xbe00-0xbe03]
[ 0.779528] pci 0000:07:03.0: reg 18: [io 0xbd00-0xbd07]
[ 0.779533] pci 0000:07:03.0: reg 1c: [io 0xbc00-0xbc03]
[ 0.779538] pci 0000:07:03.0: reg 20: [io 0xbb00-0xbb0f]
[ 0.779589] pci 0000:07:07.0: reg 10: [mem 0xfbbff000-0xfbbff7ff]
[ 0.779595] pci 0000:07:07.0: reg 14: [mem 0xfbbf8000-0xfbbfbfff]
[ 0.779632] pci 0000:07:07.0: supports D1 D2
[ 0.779633] pci 0000:07:07.0: PME# supported from D0 D1 D2 D3hot
[ 0.779637] pci 0000:07:07.0: PME# disabled
[ 0.779668] pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
[ 0.779671] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ 0.779674] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.779700] pci_bus 0000:00: on NUMA node 0
[ 0.779702] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.779865] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.779906] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.779941] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.779987] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 0.780022] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
[ 0.780060] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.798682] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.798751] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.798819] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.798888] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 0.798956] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.799025] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
[ 0.799093] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.799161] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.799230] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.799233] vgaarb: loaded
[ 0.799273] SCSI subsystem initialized
[ 0.799349] libata version 3.00 loaded.
[ 0.799374] usbcore: registered new interface driver usbfs
[ 0.799386] usbcore: registered new interface driver hub
[ 0.799399] usbcore: registered new device driver usb
[ 0.799426] PCI: Using ACPI for IRQ routing
[ 0.799428] PCI: pci_cache_line_size set to 64 bytes
[ 0.799562] alloc irq_desc for 24 on node 0
[ 0.799563] alloc kstat_irqs on node 0
[ 0.799568] alloc irq_desc for 25 on node 0
[ 0.799569] alloc kstat_irqs on node 0
[ 0.799571] alloc irq_desc for 26 on node 0
[ 0.799572] alloc kstat_irqs on node 0
[ 0.799575] alloc irq_desc for 27 on node 0
[ 0.799576] alloc kstat_irqs on node 0
[ 0.799578] alloc irq_desc for 28 on node 0
[ 0.799579] alloc kstat_irqs on node 0
[ 0.799581] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 0.799587] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
[ 0.799591] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.802354] hpet: hpet2 irq 24 for MSI
[ 0.802408] hpet: hpet3 irq 25 for MSI
[ 0.803402] hpet: hpet4 irq 26 for MSI
[ 0.804395] hpet: hpet5 irq 27 for MSI
[ 0.805387] hpet: hpet6 irq 28 for MSI
[ 0.807462] Switching to clocksource tsc
[ 0.807698] pnp: PnP ACPI init
[ 0.807705] ACPI: bus type pnp registered
[ 0.809267] pnp: PnP ACPI: found 11 devices
[ 0.809268] ACPI: ACPI bus type pnp unregistered
[ 0.809273] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.809275] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.809277] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.809278] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.809280] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.809284] system 00:07: [io 0x0400-0x04cf] has been reserved
[ 0.809285] system 00:07: [io 0x04d2-0x04ff] has been reserved
[ 0.809288] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.809291] system 00:09: [mem 0x000dd000-0x000dffff] has been reserved
[ 0.809293] system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.809295] system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.809297] system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.809298] system 00:09: [mem 0xbfbe0000-0xbfbfffff] could not be reserved
[ 0.809300] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.809302] system 00:09: [mem 0x00100000-0xbfbdffff] could not be reserved
[ 0.809304] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.809306] system 00:09: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.809307] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.809309] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.809311] system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.809312] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.809314] system 00:09: [mem 0x000e0000-0x000effff] has been reserved
[ 0.813999] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe0000000-0xe01fffff]
[ 0.814001] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe0200000-0xe03fffff 64bit pref]
[ 0.814003] pci 0000:00:1c.3: BAR 15: assigned [mem 0xe0400000-0xe05fffff 64bit pref]
[ 0.814005] pci 0000:00:1c.4: BAR 15: assigned [mem 0xe0600000-0xe07fffff 64bit pref]
[ 0.814007] pci 0000:00:1c.5: BAR 15: assigned [mem 0xe0800000-0xe09fffff pref]
[ 0.814009] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.814010] pci 0000:00:1c.3: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.814013] pci 0000:01:00.0: BAR 6: assigned [mem 0xf9000000-0xf907ffff pref]
[ 0.814014] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.814016] pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
[ 0.814019] pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf9ffffff]
[ 0.814021] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.814025] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.814027] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.814030] pci 0000:00:1c.0: bridge window [mem 0xe0000000-0xe01fffff]
[ 0.814033] pci 0000:00:1c.0: bridge window [mem 0xe0200000-0xe03fffff 64bit pref]
[ 0.814038] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.814040] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.814043] pci 0000:00:1c.3: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.814047] pci 0000:00:1c.3: bridge window [mem 0xe0400000-0xe05fffff 64bit pref]
[ 0.814051] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.814053] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.814057] pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff]
[ 0.814060] pci 0000:00:1c.4: bridge window [mem 0xe0600000-0xe07fffff 64bit pref]
[ 0.814065] pci 0000:05:00.0: BAR 6: assigned [mem 0xe0800000-0xe080ffff pref]
[ 0.814066] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[ 0.814068] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.814072] pci 0000:00:1c.5: bridge window [mem 0xfb900000-0xfb9fffff]
[ 0.814075] pci 0000:00:1c.5: bridge window [mem 0xe0800000-0xe09fffff pref]
[ 0.814079] pci 0000:06:00.0: BAR 6: assigned [mem 0xfbd00000-0xfbd1ffff pref]
[ 0.814081] pci 0000:00:1c.6: PCI bridge to [bus 06-06]
[ 0.814083] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
[ 0.814086] pci 0000:00:1c.6: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.814089] pci 0000:00:1c.6: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
[ 0.814094] pci 0000:00:1e.0: PCI bridge to [bus 07-07]
[ 0.814096] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ 0.814099] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.814102] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.814110] alloc irq_desc for 16 on node -1
[ 0.814111] alloc kstat_irqs on node -1
[ 0.814114] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.814117] pci 0000:00:03.0: setting latency timer to 64
[ 0.814123] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.814125] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.814129] pci 0000:00:1c.0: setting latency timer to 64
[ 0.814134] pci 0000:00:1c.3: enabling device (0006 -> 0007)
[ 0.814136] alloc irq_desc for 19 on node -1
[ 0.814137] alloc kstat_irqs on node -1
[ 0.814140] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.814142] pci 0000:00:1c.3: setting latency timer to 64
[ 0.814148] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.814151] pci 0000:00:1c.4: setting latency timer to 64
[ 0.814156] alloc irq_desc for 17 on node -1
[ 0.814157] alloc kstat_irqs on node -1
[ 0.814159] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.814162] pci 0000:00:1c.5: setting latency timer to 64
[ 0.814167] alloc irq_desc for 18 on node -1
[ 0.814168] alloc kstat_irqs on node -1
[ 0.814171] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.814174] pci 0000:00:1c.6: setting latency timer to 64
[ 0.814178] pci 0000:00:1e.0: setting latency timer to 64
[ 0.814181] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.814182] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
[ 0.814184] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.814185] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf9ffffff]
[ 0.814187] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.814188] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.814189] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe01fffff]
[ 0.814191] pci_bus 0000:02: resource 2 [mem 0xe0200000-0xe03fffff 64bit pref]
[ 0.814192] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.814194] pci_bus 0000:03: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 0.814195] pci_bus 0000:03: resource 2 [mem 0xe0400000-0xe05fffff 64bit pref]
[ 0.814197] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.814198] pci_bus 0000:04: resource 1 [mem 0xfba00000-0xfbafffff]
[ 0.814199] pci_bus 0000:04: resource 2 [mem 0xe0600000-0xe07fffff 64bit pref]
[ 0.814201] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.814202] pci_bus 0000:05: resource 1 [mem 0xfb900000-0xfb9fffff]
[ 0.814204] pci_bus 0000:05: resource 2 [mem 0xe0800000-0xe09fffff pref]
[ 0.814205] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
[ 0.814206] pci_bus 0000:06: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.814208] pci_bus 0000:06: resource 2 [mem 0xfbd00000-0xfbdfffff 64bit pref]
[ 0.814209] pci_bus 0000:07: resource 0 [io 0xb000-0xbfff]
[ 0.814211] pci_bus 0000:07: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 0.814212] pci_bus 0000:07: resource 3 [io 0x0000-0xffff]
[ 0.814213] pci_bus 0000:07: resource 4 [mem 0x00000000-0xffffffffffffffff]
[ 0.814224] NET: Registered protocol family 2
[ 0.814251] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.814475] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.815498] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.815753] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.815755] TCP reno registered
[ 0.815757] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.815811] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.815908] NET: Registered protocol family 1
[ 0.837573] pci 0000:01:00.0: Boot video device
[ 0.837610] PCI: CLS 64 bytes, default 64
[ 0.837620] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.837622] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.837624] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.839006] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[ 0.839338] msgmni has been set to 15981
[ 0.839371] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.839373] io scheduler noop registered
[ 0.839405] io scheduler cfq registered (default)
[ 0.839459] pcieport 0000:00:03.0: setting latency timer to 64
[ 0.839479] alloc irq_desc for 29 on node -1
[ 0.839480] alloc kstat_irqs on node -1
[ 0.839485] pcieport 0000:00:03.0: irq 29 for MSI/MSI-X
[ 0.839527] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.839551] alloc irq_desc for 30 on node -1
[ 0.839552] alloc kstat_irqs on node -1
[ 0.839557] pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X
[ 0.839607] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.839631] alloc irq_desc for 31 on node -1
[ 0.839632] alloc kstat_irqs on node -1
[ 0.839637] pcieport 0000:00:1c.3: irq 31 for MSI/MSI-X
[ 0.839684] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.839709] alloc irq_desc for 32 on node -1
[ 0.839710] alloc kstat_irqs on node -1
[ 0.839715] pcieport 0000:00:1c.4: irq 32 for MSI/MSI-X
[ 0.839769] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.839794] alloc irq_desc for 33 on node -1
[ 0.839795] alloc kstat_irqs on node -1
[ 0.839800] pcieport 0000:00:1c.5: irq 33 for MSI/MSI-X
[ 0.839847] pcieport 0000:00:1c.6: setting latency timer to 64
[ 0.839872] alloc irq_desc for 34 on node -1
[ 0.839873] alloc kstat_irqs on node -1
[ 0.839878] pcieport 0000:00:1c.6: irq 34 for MSI/MSI-X
[ 0.839933] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[ 0.839994] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.839995] ACPI: Power Button [PWRB]
[ 0.840026] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.840028] ACPI: Power Button [PWRF]
[ 0.840456] Monitor-Mwait will be used to enter C-1 state
[ 0.840471] Monitor-Mwait will be used to enter C-2 state
[ 0.840481] Monitor-Mwait will be used to enter C-3 state
[ 0.845734] ahci 0000:00:1f.2: version 3.0
[ 0.845743] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.845763] alloc irq_desc for 35 on node -1
[ 0.845764] alloc kstat_irqs on node -1
[ 0.845769] ahci 0000:00:1f.2: irq 35 for MSI/MSI-X
[ 0.845777] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
[ 0.845794] ahci: SSS flag set, parallel bus scan disabled
[ 0.856959] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
[ 0.856962] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pmp pio slum part ems apst
[ 0.856965] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.866495] scsi0 : ahci
[ 0.866539] scsi1 : ahci
[ 0.866567] scsi2 : ahci
[ 0.866594] scsi3 : ahci
[ 0.866621] scsi4 : ahci
[ 0.866649] scsi5 : ahci
[ 0.866668] ata1: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd100 irq 35
[ 0.866670] ata2: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd180 irq 35
[ 0.866672] ata3: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd200 irq 35
[ 0.866674] ata4: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd280 irq 35
[ 0.866676] ata5: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd300 irq 35
[ 0.866678] ata6: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd380 irq 35
[ 0.866695] ahci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.877470] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.877472] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.877476] ahci 0000:04:00.0: setting latency timer to 64
[ 0.877555] scsi6 : ahci
[ 0.877585] scsi7 : ahci
[ 0.877608] ata7: SATA max UDMA/133 abar m8192@0xfbafe000 port 0xfbafe100 irq 16
[ 0.877611] ata8: SATA max UDMA/133 abar m8192@0xfbafe000 port 0xfbafe180 irq 16
[ 0.877641] ahci 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.877678] alloc irq_desc for 36 on node -1
[ 0.877679] alloc kstat_irqs on node -1
[ 0.877686] ahci 0000:05:00.0: irq 36 for MSI/MSI-X
[ 0.888476] ahci 0000:05:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 0.888479] ahci 0000:05:00.0: flags: 64bit ncq pio
[ 0.888482] ahci 0000:05:00.0: setting latency timer to 64
[ 0.888732] scsi8 : ahci
[ 0.888762] scsi9 : ahci
[ 0.888791] scsi10 : ahci
[ 0.888819] scsi11 : ahci
[ 0.888849] scsi12 : ahci
[ 0.888878] scsi13 : ahci
[ 0.888906] scsi14 : ahci
[ 0.888937] scsi15 : ahci
[ 0.888958] ata9: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff100 irq 36
[ 0.888961] ata10: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff180 irq 36
[ 0.888963] ata11: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff200 irq 36
[ 0.888966] ata12: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff280 irq 36
[ 0.888968] ata13: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff300 irq 36
[ 0.888971] ata14: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff380 irq 36
[ 0.888973] ata15: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff400 irq 36
[ 0.888976] ata16: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff480 irq 36
[ 0.889042] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.889055] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.889063] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.889065] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.889079] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.889103] ehci_hcd 0000:00:1a.7: debug port 2
[ 0.892973] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.892982] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbfff000
[ 0.902377] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.902388] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.902390] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.902391] usb usb1: Product: EHCI Host Controller
[ 0.902392] usb usb1: Manufacturer: Linux 2.6.33-p1 ehci_hcd
[ 0.902393] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.902441] hub 1-0:1.0: USB hub found
[ 0.902444] hub 1-0:1.0: 6 ports detected
[ 0.902490] alloc irq_desc for 23 on node -1
[ 0.902491] alloc kstat_irqs on node -1
[ 0.902494] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.902502] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.902504] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.902509] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.902526] ehci_hcd 0000:00:1d.7: debug port 2
[ 0.906394] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.906402] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbffe000
[ 0.915778] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.915786] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.915787] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.915789] usb usb2: Product: EHCI Host Controller
[ 0.915790] usb usb2: Manufacturer: Linux 2.6.33-p1 ehci_hcd
[ 0.915791] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.915833] hub 2-0:1.0: USB hub found
[ 0.915835] hub 2-0:1.0: 8 ports detected
[ 0.915882] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.915909] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.915913] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.915915] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.915919] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.915939] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[ 0.915958] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.915959] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.915960] usb usb3: Product: UHCI Host Controller
[ 0.915961] usb usb3: Manufacturer: Linux 2.6.33-p1 uhci_hcd
[ 0.915963] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.916003] hub 3-0:1.0: USB hub found
[ 0.916005] hub 3-0:1.0: 2 ports detected
[ 0.916039] alloc irq_desc for 21 on node -1
[ 0.916040] alloc kstat_irqs on node -1
[ 0.916043] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.916047] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.916049] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.916053] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.916077] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
[ 0.916096] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.916097] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.916099] usb usb4: Product: UHCI Host Controller
[ 0.916100] usb usb4: Manufacturer: Linux 2.6.33-p1 uhci_hcd
[ 0.916101] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.916146] hub 4-0:1.0: USB hub found
[ 0.916148] hub 4-0:1.0: 2 ports detected
[ 0.916184] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.916188] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.916190] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.916194] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.916213] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
[ 0.916231] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.916233] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.916234] usb usb5: Product: UHCI Host Controller
[ 0.916235] usb usb5: Manufacturer: Linux 2.6.33-p1 uhci_hcd
[ 0.916236] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.916279] hub 5-0:1.0: USB hub found
[ 0.916281] hub 5-0:1.0: 2 ports detected
[ 0.916316] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.916320] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.916322] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.916325] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.916344] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
[ 0.916362] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.916364] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.916365] usb usb6: Product: UHCI Host Controller
[ 0.916366] usb usb6: Manufacturer: Linux 2.6.33-p1 uhci_hcd
[ 0.916367] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.916406] hub 6-0:1.0: USB hub found
[ 0.916408] hub 6-0:1.0: 2 ports detected
[ 0.916443] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.916447] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.916449] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.916453] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.916478] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
[ 0.916496] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.916497] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.916499] usb usb7: Product: UHCI Host Controller
[ 0.916500] usb usb7: Manufacturer: Linux 2.6.33-p1 uhci_hcd
[ 0.916501] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.916541] hub 7-0:1.0: USB hub found
[ 0.916543] hub 7-0:1.0: 2 ports detected
[ 0.916579] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.916583] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.916585] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.916588] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.916607] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
[ 0.916625] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.916627] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.916628] usb usb8: Product: UHCI Host Controller
[ 0.916629] usb usb8: Manufacturer: Linux 2.6.33-p1 uhci_hcd
[ 0.916630] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.916671] hub 8-0:1.0: USB hub found
[ 0.916676] hub 8-0:1.0: 2 ports detected
[ 0.916710] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.916714] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.916716] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.916720] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 9
[ 0.916738] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f900
[ 0.916757] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.916759] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.916760] usb usb9: Product: UHCI Host Controller
[ 0.916761] usb usb9: Manufacturer: Linux 2.6.33-p1 uhci_hcd
[ 0.916762] usb usb9: SerialNumber: 0000:00:1d.3
[ 0.916806] hub 9-0:1.0: USB hub found
[ 0.916808] hub 9-0:1.0: 2 ports detected
[ 0.916857] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.916866] xhci_hcd 0000:03:00.0: setting latency timer to 64
[ 0.916869] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.916873] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 10
[ 0.917003] xhci_hcd 0000:03:00.0: irq 19, io mem 0xfbcfe000
[ 0.917036] usb usb10: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
[ 0.917041] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.917042] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.917044] usb usb10: Product: xHCI Host Controller
[ 0.917045] usb usb10: Manufacturer: Linux 2.6.33-p1 xhci_hcd
[ 0.917046] usb usb10: SerialNumber: 0000:03:00.0
[ 0.917077] xHCI xhci_add_endpoint called for root hub
[ 0.917078] xHCI xhci_check_bandwidth called for root hub
[ 0.917092] hub 10-0:1.0: USB hub found
[ 0.917094] hub 10-0:1.0: 4 ports detected
[ 0.917146] Initializing USB Mass Storage driver...
[ 0.917171] usbcore: registered new interface driver usb-storage
[ 0.917172] USB Mass Storage support registered.
[ 0.917195] usbcore: registered new interface driver libusual
[ 0.917217] PNP: No PS/2 controller found. Probing ports directly.
[ 0.950836] Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 0.950837] If AUX port is really absent please use the 'i8042.noaux' option.
[ 1.170678] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.172199] ata1.00: ATA-8: MAXTOR STM3750330AS, MX15, max UDMA/133
[ 1.172201] ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.174134] ata1.00: configured for UDMA/133
[ 1.181964] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.181993] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.184688] scsi 0:0:0:0: Direct-Access ATA MAXTOR STM375033 MX15 PQ: 0 ANSI: 5
[ 1.184779] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 1.184803] sd 0:0:0:0: [sda] Write Protect is off
[ 1.184805] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.184814] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.184886] sda: sda1 sda2 sda3 sda4 <
[ 1.198632] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.198636] ata13: SATA link down (SStatus 0 SControl 300)
[ 1.198641] ata14: SATA link down (SStatus 0 SControl 300)
[ 1.198645] ata11: SATA link down (SStatus 0 SControl 300)
[ 1.198685] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.198688] ata12: SATA link down (SStatus 0 SControl 300)
[ 1.198692] ata15: SATA link down (SStatus 0 SControl 300)
[ 1.200101] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.200135] mice: PS/2 mouse device common for all mice
[ 1.200156] rtc_cmos 00:04: RTC can wake from S4
[ 1.200174] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.200197] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.200331] cpuidle: using governor ladder
[ 1.200543] cpuidle: using governor menu
[ 1.200608] ata16: SATA link up <unknown> (SStatus FFFFFF93 SControl 300)
[ 1.200658] ------------[ cut here ]------------
[ 1.200662] WARNING: at arch/x86/kernel/hpet.c:404 hpet_next_event+0x57/0x77()
[ 1.200663] Hardware name: P55A-UD4
[ 1.200664] hpet: compare register read back failed.
[ 1.200665] Modules linked in:
[ 1.200666] Pid: 0, comm: swapper Not tainted 2.6.33-p1 #10
[ 1.200668] Call Trace:
[ 1.200671] [<ffffffff8102c98f>] ? warn_slowpath_common+0x76/0x8c
[ 1.200673] [<ffffffff8102c9f7>] ? warn_slowpath_fmt+0x40/0x45
[ 1.200676] [<ffffffff81026166>] ? find_busiest_group+0x341/0x7fe
[ 1.200678] [<ffffffff81018eb1>] ? hpet_next_event+0x57/0x77
[ 1.200681] [<ffffffff81048d1e>] ? tick_dev_program_event+0x33/0x9e
[ 1.200684] [<ffffffff81048836>] ? tick_broadcast_oneshot_control+0x9c/0xf5
[ 1.200686] [<ffffffff81048220>] ? tick_notify+0x1f9/0x34d
[ 1.200688] [<ffffffff8104257a>] ? notifier_call_chain+0x2e/0x5b
[ 1.200690] [<ffffffff81047c56>] ? clockevents_notify+0x31/0x139
[ 1.200693] [<ffffffff81175aa0>] ? acpi_idle_enter_simple+0x93/0x130
[ 1.200696] [<ffffffff811673c3>] ? acpi_write_bit_register+0x9e/0xab
[ 1.200698] [<ffffffff8117585c>] ? acpi_idle_enter_bm+0xd3/0x284
[ 1.200701] [<ffffffff811f2705>] ? cpuidle_idle_call+0x89/0xc0
[ 1.200704] [<ffffffff81001256>] ? cpu_idle+0x9d/0xd7
[ 1.200707] ---[ end trace a4e806103d58b3e6 ]---
[ 1.200719] ata16.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 1.200725] usbcore: registered new interface driver hiddev
[ 1.200732] usbcore: registered new interface driver usbhid
[ 1.200733] usbhid: USB HID core driver
[ 1.200810] TCP cubic registered
[ 1.200811] NET: Registered protocol family 17
[ 1.200957] ata16.00: configured for UDMA/66
[ 1.203697] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.216877] sda5 >
[ 1.217103] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.217615] registered taskstats version 1
[ 1.218143] rtc_cmos 00:04: setting system clock to 2010-03-09 21:14:54 UTC (1268169294)
[ 1.321687] usb 1-1: New USB device found, idVendor=0dda, idProduct=2005
[ 1.321691] usb 1-1: New USB device strings: Mfr=3, Product=4, SerialNumber=5
[ 1.321694] usb 1-1: Product: Card Reader
[ 1.321696] usb 1-1: Manufacturer: Hama
[ 1.321699] usb 1-1: SerialNumber: 000000000013
[ 1.323401] scsi16 : usb-storage 1-1:1.0
[ 1.425039] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 1.541342] usb 1-2: New USB device found, idVendor=2040, idProduct=7060
[ 1.541346] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.541349] usb 1-2: Product: Nova-T Stick
[ 1.541351] usb 1-2: Manufacturer: Hauppauge
[ 1.541354] usb 1-2: SerialNumber: 4027602366
[ 1.643452] usb 2-7: new high speed USB device using ehci_hcd and address 2
[ 1.757891] usb 2-7: New USB device found, idVendor=0409, idProduct=0058
[ 1.757896] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.757899] usb 2-7: Product: USB2.0 Hub Controller
[ 1.757902] usb 2-7: Manufacturer: NEC Corporation
[ 1.758186] hub 2-7:1.0: USB hub found
[ 1.758237] hub 2-7:1.0: 4 ports detected
[ 1.905764] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.945632] ata2.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
[ 1.945636] ata2.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.987287] ata2.00: configured for UDMA/133
[ 1.997654] scsi 1:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
[ 1.997787] sd 1:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 1.997821] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.997822] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.997831] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.997893] sdb: sdb1
[ 2.008267] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.091264] usb 9-2: new full speed USB device using uhci_hcd and address 2
[ 2.202972] usb 9-2: device descriptor read/64, error -71
[ 2.415413] usb 9-2: device descriptor read/64, error -71
[ 2.617873] usb 9-2: new full speed USB device using uhci_hcd and address 3
[ 2.718649] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.729579] usb 9-2: device descriptor read/64, error -71
[ 2.771979] ata3.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
[ 2.771983] ata3.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.813723] ata3.00: configured for UDMA/133
[ 2.824447] scsi 2:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
[ 2.824569] sd 2:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 2.824608] sd 2:0:0:0: [sdc] Write Protect is off
[ 2.824610] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.824620] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.824678] sdc: unknown partition table
[ 2.838645] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 2.942015] usb 9-2: device descriptor read/64, error -71
[ 3.128591] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.144484] usb 9-2: new full speed USB device using uhci_hcd and address 4
[ 3.551391] usb 9-2: device not accepting address 4, error -71
[ 3.653177] usb 9-2: new full speed USB device using uhci_hcd and address 5
[ 3.860626] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.864749] ata5.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100, ATAPI AN
[ 3.869068] ata5.00: configured for UDMA/100
[ 3.887893] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN02 PQ: 0 ANSI: 5
[ 4.060046] usb 9-2: device not accepting address 5, error -71
[ 4.060103] hub 9-0:1.0: unable to enumerate USB device on port 2
[ 4.132898] usb 2-7.3: new low speed USB device using ehci_hcd and address 4
[ 4.191735] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.203026] scsi 15:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
[ 4.225436] usb 2-7.3: New USB device found, idVendor=0458, idProduct=002e
[ 4.225440] usb 2-7.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.225444] usb 2-7.3: Product: NetScroll+ Traveler
[ 4.225446] usb 2-7.3: Manufacturer: KYE
[ 4.230336] input: KYE NetScroll+ Traveler as /devices/pci0000:00/0000:00:1d.7/usb2/2-7/2-7.3/2-7.3:1.0/input/input2
[ 4.230370] generic-usb 0003:0458:002E.0001: input: USB HID v1.10 Mouse [KYE NetScroll+ Traveler] on usb-0000:00:1d.7-7.3/input0
[ 4.240650] XFS mounting filesystem sda3
[ 4.303603] usb 2-7.4: new low speed USB device using ehci_hcd and address 5
[ 4.374214] Ending clean XFS mount for filesystem: sda3
[ 4.374298] VFS: Mounted root (xfs filesystem) readonly on device 8:3.
[ 4.374363] Freeing unused kernel memory: 368k freed
[ 4.374441] Write protecting the kernel read-only data: 6144k
[ 4.374769] Freeing unused kernel memory: 1612k freed
[ 4.375136] Freeing unused kernel memory: 1148k freed
[ 4.394728] usb 2-7.4: New USB device found, idVendor=413c, idProduct=2003
[ 4.394733] usb 2-7.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.394736] usb 2-7.4: Product: Dell USB Keyboard
[ 4.394739] usb 2-7.4: Manufacturer: Dell
[ 4.399901] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-7/2-7.4/2-7.4:1.0/input/input3
[ 4.399911] generic-usb 0003:413C:2003.0002: input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.7-7.4/input0
[ 6.149402] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.149422] r8169 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6.149562] r8169 0000:06:00.0: setting latency timer to 64
[ 6.149604] alloc irq_desc for 37 on node -1
[ 6.149606] alloc kstat_irqs on node -1
[ 6.149620] r8169 0000:06:00.0: irq 37 for MSI/MSI-X
[ 6.149854] eth0: RTL8168d/8111d at 0xffffc9000007c000, 6c:f0:49:50:b5:72, XID 083000c0 IRQ 37
[ 6.171857] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.171892] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 6.171914] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 6.171939] scsi 4:0:0:0: Attached scsi generic sg3 type 5
[ 6.171958] scsi 15:0:0:0: Attached scsi generic sg4 type 3
[ 6.177400] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 6.198272] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.198277] Uniform CD-ROM driver Revision: 3.20
[ 6.198430] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 6.311724] scsi 16:0:0:0: Direct-Access Hama CF Card Reader 9317 PQ: 0 ANSI: 0
[ 6.311836] sd 16:0:0:0: Attached scsi generic sg5 type 0
[ 6.312969] scsi 16:0:0:1: Direct-Access Hama SM Card Reader 9317 PQ: 0 ANSI: 0
[ 6.313069] sd 16:0:0:1: Attached scsi generic sg6 type 0
[ 6.314574] scsi 16:0:0:2: Direct-Access Hama SD Card Reader 9317 PQ: 0 ANSI: 0
[ 6.314647] sd 16:0:0:2: Attached scsi generic sg7 type 0
[ 6.316076] sd 16:0:0:0: [sdd] Attached SCSI removable disk
[ 6.317065] scsi 16:0:0:3: Direct-Access Hama MS Card Reader 9317 PQ: 0 ANSI: 0
[ 6.317147] sd 16:0:0:3: Attached scsi generic sg8 type 0
[ 6.320301] sd 16:0:0:2: [sdf] Attached SCSI removable disk
[ 6.321547] sd 16:0:0:3: [sdg] Attached SCSI removable disk
[ 6.324108] sd 16:0:0:1: [sde] Attached SCSI removable disk
[ 6.566521] alloc irq_desc for 22 on node -1
[ 6.566523] alloc kstat_irqs on node -1
[ 6.566528] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.566648] alloc irq_desc for 38 on node -1
[ 6.566649] alloc kstat_irqs on node -1
[ 6.566656] HDA Intel 0000:00:1b.0: irq 38 for MSI/MSI-X
[ 6.566677] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.660583] hda_codec: ALC889: BIOS auto-probing.
[ 7.907741] Adding 8980292k swap on /dev/sda5. Priority:-1 extents:1 across:8980292k
[ 8.027484] loop: module loaded
[ 8.069900] it87: Found IT8720F chip at 0x290, revision 8
[ 8.069907] it87: VID is disabled (pins used for GPIO)
[ 8.069913] it87: in3 is VCC (+5V)
[ 8.126412] coretemp coretemp.0: Unable to access MSR 0xEE, for Tjmax, left at default
[ 8.126493] coretemp coretemp.1: Unable to access MSR 0xEE, for Tjmax, left at default
[ 8.126573] coretemp coretemp.2: Unable to access MSR 0xEE, for Tjmax, left at default
[ 8.126676] coretemp coretemp.3: Unable to access MSR 0xEE, for Tjmax, left at default
[ 8.126703] coretemp coretemp.4: Unable to access MSR 0xEE, for Tjmax, left at default
[ 8.126735] coretemp coretemp.5: Unable to access MSR 0xEE, for Tjmax, left at default
[ 8.126767] coretemp coretemp.6: Unable to access MSR 0xEE, for Tjmax, left at default
[ 8.127353] coretemp coretemp.7: Unable to access MSR 0xEE, for Tjmax, left at default
[ 8.141736] iTCO_vendor_support: vendor-support=0
[ 8.154792] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 8.154944] iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0460)
[ 8.155007] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.854964] r8169: eth0: link up
[ 8.854968] r8169: eth0: link up
[ 17.979694] microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x3
[ 17.979701] platform microcode: firmware: requesting intel-ucode/06-1e-05
[ 18.010532] microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x3
[ 18.010540] platform microcode: firmware: requesting intel-ucode/06-1e-05
[ 18.012166] microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x3
[ 18.012170] platform microcode: firmware: requesting intel-ucode/06-1e-05
[ 18.013343] microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x3
[ 18.013346] platform microcode: firmware: requesting intel-ucode/06-1e-05
[ 18.014553] microcode: CPU4 sig=0x106e5, pf=0x2, revision=0x3
[ 18.014561] platform microcode: firmware: requesting intel-ucode/06-1e-05
[ 18.015698] microcode: CPU5 sig=0x106e5, pf=0x2, revision=0x3
[ 18.015701] platform microcode: firmware: requesting intel-ucode/06-1e-05
[ 18.016785] microcode: CPU6 sig=0x106e5, pf=0x2, revision=0x3
[ 18.016788] platform microcode: firmware: requesting intel-ucode/06-1e-05
[ 18.017808] microcode: CPU7 sig=0x106e5, pf=0x2, revision=0x3
[ 18.017811] platform microcode: firmware: requesting intel-ucode/06-1e-05
[ 18.018880] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba

[unhandled content-type:application/octet-stream]
\
 
 \ /
  Last update: 2010-03-10 10:23    [W:0.062 / U:5.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site