lkml.org 
[lkml]   [2010]   [Feb]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] SCRIPTS: s/should/must/ for all ERRORs
Date

Signed-off-by: Richard Hartmann <richih.mailinglist@gmail.com>
---
scripts/checkpatch.pl | 32 ++++++++++++++++----------------
1 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index d5405aa..96ca9f0 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -1355,7 +1355,7 @@ sub process {
my $ptr = substr($blank, 0, length($utf8_prefix)) . "^";
my $hereptr = "$hereline$ptr\n";

- ERROR("Invalid UTF-8, patch and commit message should be encoded in UTF-8\n" . $hereptr);
+ ERROR("Invalid UTF-8, patch and commit message must be encoded in UTF-8\n" . $hereptr);
}

# ignore non-hunk lines and lines being removed
@@ -1408,7 +1408,7 @@ sub process {
if ($rawline =~ /^\+\s* \t\s*\S/ ||
$rawline =~ /^\+\s* \s*/) {
my $herevet = "$here\n" . cat_vet($rawline) . "\n";
- ERROR("code indent should use tabs where possible\n" . $herevet);
+ ERROR("code indent must use tabs where possible\n" . $herevet);
}

# check we are in a valid C source file if not then ignore this hunk
@@ -1515,7 +1515,7 @@ sub process {
}
}
if ($err ne '') {
- ERROR("switch and case should be at the same indent\n$hereline$err");
+ ERROR("switch and case must be at the same indent\n$hereline$err");
}
}

@@ -1543,7 +1543,7 @@ sub process {
#print "pre<$pre_ctx>\nline<$line>\nctx<$ctx>\nnext<$lines[$ctx_ln - 1]>\n";

if ($ctx !~ /{\s*/ && defined($lines[$ctx_ln -1]) && $lines[$ctx_ln - 1] =~ /^\+\s*{/) {
- ERROR("that open brace { should be on the previous line\n" .
+ ERROR("that open brace { must be on the previous line\n" .
"$here\n$ctx\n$lines[$ctx_ln - 1]\n");
}
if ($level == 0 && $pre_ctx !~ /}\s*while\s*\($/ &&
@@ -1682,7 +1682,7 @@ sub process {
# check for initialisation to aggregates open brace on the next line
if ($line =~ /^.\s*{/ &&
$prevline =~ /(?:^|[^=])=\s*$/) {
- ERROR("that open brace { should be on the previous line\n" . $hereprev);
+ ERROR("that open brace { must be on the previous line\n" . $hereprev);
}

#
@@ -1777,7 +1777,7 @@ sub process {

#print "from<$from> to<$to>\n";
if ($from ne $to) {
- ERROR("\"(foo$from)\" should be \"(foo$to)\"\n" . $herecurr);
+ ERROR("\"(foo$from)\" must be \"(foo$to)\"\n" . $herecurr);
}
} elsif ($line =~ m{\b$NonptrType(\s*(?:$Modifier\b\s*|\*\s*)+)($Ident)}) {
my ($from, $to, $ident) = ($1, $1, $2);
@@ -1794,7 +1794,7 @@ sub process {

#print "from<$from> to<$to> ident<$ident>\n";
if ($from ne $to && $ident !~ /^$Modifier$/) {
- ERROR("\"foo${from}bar\" should be \"foo${to}bar\"\n" . $herecurr);
+ ERROR("\"foo${from}bar\" must be \"foo${to}bar\"\n" . $herecurr);
}
}

@@ -2188,7 +2188,7 @@ sub process {
$stat_real = "[...]\n$stat_real";
}

- ERROR("trailing statements should be on next line\n" . $herecurr . $stat_real);
+ ERROR("trailing statements must be on next line\n" . $herecurr . $stat_real);
}
}

@@ -2212,12 +2212,12 @@ sub process {
my $s = $1;
$s =~ s/$;//g; # Remove any comments
if ($s !~ /^\s*(?:\sif|(?:{|)\s*\\?\s*$)/) {
- ERROR("trailing statements should be on next line\n" . $herecurr);
+ ERROR("trailing statements must be on next line\n" . $herecurr);
}
}
# if should not continue a brace
if ($line =~ /}\s*if\b/) {
- ERROR("trailing statements should be on next line\n" .
+ ERROR("trailing statements must be on next line\n" .
$herecurr);
}
# case and default should not have general statements after them
@@ -2227,14 +2227,14 @@ sub process {
\s*return\s+
)/xg)
{
- ERROR("trailing statements should be on next line\n" . $herecurr);
+ ERROR("trailing statements must be on next line\n" . $herecurr);
}

# Check for }<nl>else {, these must be at the same
# indent level to be relevant to each other.
if ($prevline=~/}\s*$/ and $line=~/^.\s*else\s*/ and
$previndent == $indent) {
- ERROR("else should follow close brace '}'\n" . $hereprev);
+ ERROR("else must follow close brace '}'\n" . $hereprev);
}

if ($prevline=~/}\s*$/ and $line=~/^.\s*while\s*/ and
@@ -2247,7 +2247,7 @@ sub process {
$s =~ s/\n.*//g;

if ($s =~ /^\s*;/) {
- ERROR("while should follow close brace '}'\n" . $hereprev);
+ ERROR("while must follow close brace '}'\n" . $hereprev);
}
}

@@ -2356,7 +2356,7 @@ sub process {
if ($rest !~ /while\s*\(/ &&
$dstat !~ /$exceptions/)
{
- ERROR("Macros with multiple statements should be enclosed in a do - while loop\n" . "$here\n$ctx\n");
+ ERROR("Macros with multiple statements must be enclosed in a do - while loop\n" . "$here\n$ctx\n");
}

} elsif ($ctx !~ /;/) {
@@ -2366,7 +2366,7 @@ sub process {
$dstat !~ /^\.$Ident\s*=/ &&
$dstat =~ /$Operators/)
{
- ERROR("Macros with complex values should be enclosed in parenthesis\n" . "$here\n$ctx\n");
+ ERROR("Macros with complex values must be enclosed in parenthesis\n" . "$here\n$ctx\n");
}
}
}
@@ -2564,7 +2564,7 @@ sub process {
# storage class and type.
if ($line =~ /\b$Type\s+$Inline\b/ ||
$line =~ /\b$Inline\s+$Storage\b/) {
- ERROR("inline keyword should sit between storage class and type\n" . $herecurr);
+ ERROR("inline keyword must sit between storage class and type\n" . $herecurr);
}

# Check for __inline__ and __inline, prefer inline
--
1.6.6.1


\
 
 \ /
  Last update: 2010-02-10 01:45    [W:0.190 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site