lkml.org 
[lkml]   [2010]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRE: [PATCHv1] staging: Synaptics RMI4 touchpad driver support
Hi Arce,

I'm also the GPIO pin for interrupt with request threaded irq .
I'm passing the irq_type from the platform data.
Which irq_type are you using for your platform?

Thanks & Regards,
Naveen


> -----Original Message-----
> From: Arce, Abraham [mailto:x0066660@ti.com]
> Sent: Thursday, November 04, 2010 3:07 AM
> To: Greg KH; Dmitry Torokhov
> Cc: Linus WALLEIJ; Naveen Kumar GADDIPATI; linux-
> kernel@vger.kernel.org; STEricsson_nomadik_linux; linux-
> input@vger.kernel.org
> Subject: RE: [PATCHv1] staging: Synaptics RMI4 touchpad driver support
>
> Hi Naveen,
>
> > From: linux-input-owner@vger.kernel.org [mailto:linux-input-
> > owner@vger.kernel.org] On Behalf Of Greg KH
> > Sent: Wednesday, November 03, 2010 1:20 PM
> > To: Dmitry Torokhov
> > Cc: Linus Walleij; Naveen Kumar GADDIPATI; linux-
> kernel@vger.kernel.org;
> > STEricsson_nomadik_linux; linux-input@vger.kernel.org
> > Subject: Re: [PATCHv1] staging: Synaptics RMI4 touchpad driver
> support
> >
> > On Wed, Nov 03, 2010 at 12:07:52PM -0700, Dmitry Torokhov wrote:
> > > On Wed, Nov 03, 2010 at 11:10:58AM -0700, Greg KH wrote:
> > > > On Tue, Nov 02, 2010 at 08:40:30AM -0700, Dmitry Torokhov wrote:
> > > > > On Tue, Nov 02, 2010 at 03:14:48PM +0100, Linus Walleij wrote:
> > > > > > Greg KH wrote:
> > > > > >
> > > > > > >> +Wait for the official upstream synaptics rmi4 clearpad
> drivers as
> > promised over the past few months
> > > > > > >> +Merge any device support needed from this driver into it
> > > > > > >> +Delete this driver
> > > > > > >
> > > > > > > Huh?
> > > > > > >
> > > > > > > Why not just add this driver to the kernel tree instead?
> When the
> > > > > > > "promised" driver then eventually shows up (who is
> promising it?)
> > then
> > > > > > > delete the thing.
> > > > >
> > > > > The same reason as there were several wireless drivers in
> staging?
> > > >
> > > > Ok, that's a good enough reason for me :)
> > > >
> > > > > > Well, Alan (on behalf of Ramesh Agarwal) sent out a very
> similar
> > > > > > patch (Titled "Synaptics TM1217 Touchscreen Controller
> driver")
> > > > > > the other day, and OTOMH that was after discussions with
> Synaptics
> > > > > > where they said they were working on a "real" driver (a
> rather
> > > > > > complex RMI4 bus driver) and we believe they will fix that
> sooner
> > > > > > or later.
> > > > > >
> > > > > > So, until sooner or later happens we thought we'd keep it in
> staging.
> > > > > >
> > > > > > If you prefer both Alan and we can probably submit our
> patches for
> > > > > > inclusion in the proper place.
> > > > > >
> > > > > > A side effect may be that the Synaptics RMI4 people may have
> trouble
> > > > > > to merge their driver into input/ since they may be requested
> to
> > > > > > refactor the existing drivers to use it rather than merging
> new stuff,
> > > > > > putting some burden on their shoulders.
> > > > > >
> > > > >
> > > > > No, they have not been requested to change any existing [in
> tree]
> > > > > drivers. They however been asked to convert to the driver core
> > > > > primitives instead of rolling their own infprastructure to
> implement
> > > > > devices and drivers binding.
> > > >
> > > > If you don't object to this driver going in, and there is a path
> forward
> > > > in the future for it to be able to be removed, then I will be
> glad to
> > > > add it.
> > > >
> > > > Can I add your Acked-by: to the patch for this?
> > > >
> > >
> > > Umm... I haven't looked in detail, but I think it is sane enough
> for
> > > staging... Much better than Alan's version that seemed to create a
> > > separate input device for every finger. Needs to depend on INPUT
> and
> > > probably regulators framework... Probe function may call
> > > input_free_device() after calling input_register_device() which is
> not
> > > good.
> >
> > Great, thanks for this.
> >
> > > Basically staging is yours, you can add whatever you want to it ;)
> >
> > Heh, well, I try to at least cooperate with the different subsystem
> > maintainers. I don't need even more people pissed-off at me than I
> > normally get :)
> >
> > I'll queue this up for .38.
> >
>
> I have done some initial testing with this patch, it includes some
> modifications to the board file, I have a gpio acting as irq plus
> driver code itself
>
> I won't be able to get events (board will hang) unless adding the
> following code, is this due to the usage of a gpio as interrupt? If you
> could please clarify...
>
> @@ -481,6 +483,9 @@ static int synaptics_rmi4_sensor_report(struct
> synaptics_rmi4_data *pdata)
>
> rfi);
> }
> }
> +
> + enable_irq(gpio_to_irq(pdata->irq_number));
> +
> /* return the number of touch points */
> return touch;
> }
> @@ -498,6 +503,8 @@ static irqreturn_t synaptics_rmi4_irq(int irq, void
> *data)
> struct synaptics_rmi4_data *pdata = data;
> int touch_count;
> do {
> + disable_irq_nosync(gpio_to_irq(pdata->irq_number));
> +
> touch_count = synaptics_rmi4_sensor_report(pdata);
> if (touch_count)
> wait_event_timeout(pdata->wait, pdata-
> >touch_stopped,
>
> Best Regards
> Abraham



\
 
 \ /
  Last update: 2010-11-04 07:05    [W:0.170 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site