Messages in this thread Patch in this message | | | From | "Gadiyar, Anand" <> | Date | Mon, 6 Jul 2009 18:22:30 +0530 | Subject | [PATCH] Trivial: Fix typo "for for" in multiple files |
| |
From: Anand Gadiyar <gadiyar@ti.com>
Trivial: Fix typo "for for" in multiple files.
Signed-off-by: Anand Gadiyar <gadiyar@ti.com> --- After submitting a patch [1] for two instances of this in EHCI code, I decided to grep the rest of the kernel as well and came up with this.
Let me know if you want me to re-submit with both patches folded together.
[1] <http://patchwork.kernel.org/patch/34236/>
Documentation/filesystems/nfsroot.txt | 2 +- Documentation/powerpc/booting-without-of.txt | 2 +- arch/blackfin/mach-bf538/include/mach/defBF539.h | 2 +- arch/mips/include/asm/ioctl.h | 2 +- arch/powerpc/kernel/udbg_16550.c | 2 +- arch/powerpc/platforms/powermac/udbg_scc.c | 2 +- drivers/edac/edac_core.h | 2 +- drivers/infiniband/hw/ipath/ipath_iba6110.c | 2 +- drivers/isdn/i4l/isdn_common.c | 4 ++-- drivers/media/Kconfig | 2 +- drivers/net/bnx2x_reg.h | 2 +- fs/xfs/xfs_fs.h | 2 +- include/linux/raid/md_k.h | 2 +- include/linux/usb.h | 2 +- 14 files changed, 15 insertions(+), 15 deletions(-)
Index: linux-omap-2.6/Documentation/filesystems/nfsroot.txt =================================================================== --- linux-omap-2.6.orig/Documentation/filesystems/nfsroot.txt +++ linux-omap-2.6/Documentation/filesystems/nfsroot.txt @@ -105,7 +105,7 @@ ip=<client-ip>:<server-ip>:<gw-ip>:<netm the client address and this parameter is NOT empty only replies from the specified server are accepted. - Only required for for NFS root. That is autoconfiguration + Only required for NFS root. That is autoconfiguration will not be triggered if it is missing and NFS root is not in operation. Index: linux-omap-2.6/Documentation/powerpc/booting-without-of.txt =================================================================== --- linux-omap-2.6.orig/Documentation/powerpc/booting-without-of.txt +++ linux-omap-2.6/Documentation/powerpc/booting-without-of.txt @@ -1931,7 +1931,7 @@ prefixed with the string "marvell,", for devices. This field represents the number of cells needed to represent the address of the memory-mapped registers of devices within the system controller chip. - - #size-cells : Size representation for for the memory-mapped + - #size-cells : Size representation for the memory-mapped registers within the system controller chip. - #interrupt-cells : Defines the width of cells used to represent interrupts. Index: linux-omap-2.6/arch/blackfin/mach-bf538/include/mach/defBF539.h =================================================================== --- linux-omap-2.6.orig/arch/blackfin/mach-bf538/include/mach/defBF539.h +++ linux-omap-2.6/arch/blackfin/mach-bf538/include/mach/defBF539.h @@ -2269,7 +2269,7 @@ #define AMBEN_B0_B1 0x0004 /* Enable Asynchronous Memory Banks 0 & 1 only */ #define AMBEN_B0_B1_B2 0x0006 /* Enable Asynchronous Memory Banks 0, 1, and 2 */ #define AMBEN_ALL 0x0008 /* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */ -#define CDPRIO 0x0100 /* DMA has priority over core for for external accesses */ +#define CDPRIO 0x0100 /* DMA has priority over core for external accesses */ /* EBIU_AMGCTL Bit Positions */ #define AMCKEN_P 0x0000 /* Enable CLKOUT */ Index: linux-omap-2.6/arch/mips/include/asm/ioctl.h =================================================================== --- linux-omap-2.6.orig/arch/mips/include/asm/ioctl.h +++ linux-omap-2.6/arch/mips/include/asm/ioctl.h @@ -18,7 +18,7 @@ * the process. I'd like to clean it up for the i386 as well, but * it's so painful recognizing both the new and the old numbers.. * - * The same applies for for the MIPS ABI; in fact even the macros + * The same applies for the MIPS ABI; in fact even the macros * from Linux/Alpha fit almost perfectly. */ Index: linux-omap-2.6/arch/powerpc/kernel/udbg_16550.c =================================================================== --- linux-omap-2.6.orig/arch/powerpc/kernel/udbg_16550.c +++ linux-omap-2.6/arch/powerpc/kernel/udbg_16550.c @@ -1,5 +1,5 @@ /* - * udbg for for NS16550 compatable serial ports + * udbg for NS16550 compatable serial ports * * Copyright (C) 2001-2005 PPC 64 Team, IBM Corp * Index: linux-omap-2.6/arch/powerpc/platforms/powermac/udbg_scc.c =================================================================== --- linux-omap-2.6.orig/arch/powerpc/platforms/powermac/udbg_scc.c +++ linux-omap-2.6/arch/powerpc/platforms/powermac/udbg_scc.c @@ -1,5 +1,5 @@ /* - * udbg for for zilog scc ports as found on Apple PowerMacs + * udbg for zilog scc ports as found on Apple PowerMacs * * Copyright (C) 2001-2005 PPC 64 Team, IBM Corp * Index: linux-omap-2.6/drivers/edac/edac_core.h =================================================================== --- linux-omap-2.6.orig/drivers/edac/edac_core.h +++ linux-omap-2.6/drivers/edac/edac_core.h @@ -268,7 +268,7 @@ enum scrub_type { * is irrespective of the memory devices being mounted * on both sides of the memory stick. * - * Socket set: All of the memory sticks that are required for for + * Socket set: All of the memory sticks that are required for * a single memory access or all of the memory sticks * spanned by a chip-select row. A single socket set * has two chip-select rows and if double-sided sticks Index: linux-omap-2.6/drivers/infiniband/hw/ipath/ipath_iba6110.c =================================================================== --- linux-omap-2.6.orig/drivers/infiniband/hw/ipath/ipath_iba6110.c +++ linux-omap-2.6/drivers/infiniband/hw/ipath/ipath_iba6110.c @@ -809,7 +809,7 @@ static int ipath_setup_ht_reset(struct i * errors. We only bother to do this at load time, because it's OK if * it happened before we were loaded (first time after boot/reset), * but any time after that, it's fatal anyway. Also need to not check - * for for upper byte errors if we are in 8 bit mode, so figure out + * for upper byte errors if we are in 8 bit mode, so figure out * our width. For now, at least, also complain if it's 8 bit. */ static void slave_or_pri_blk(struct ipath_devdata *dd, struct pci_dev *pdev, Index: linux-omap-2.6/drivers/isdn/i4l/isdn_common.c =================================================================== --- linux-omap-2.6.orig/drivers/isdn/i4l/isdn_common.c +++ linux-omap-2.6/drivers/isdn/i4l/isdn_common.c @@ -761,7 +761,7 @@ isdn_getnum(char **p) * Be aware that this is not an atomic operation when sleep != 0, even though * interrupts are turned off! Well, like that we are currently only called * on behalf of a read system call on raw device files (which are documented - * to be dangerous and for for debugging purpose only). The inode semaphore + * to be dangerous and for debugging purpose only). The inode semaphore * takes care that this is not called for the same minor device number while * we are sleeping, but access is not serialized against simultaneous read() * from the corresponding ttyI device. Can other ugly events, like changes @@ -873,7 +873,7 @@ isdn_readbchan(int di, int channel, u_ch * Be aware that this is not an atomic operation when sleep != 0, even though * interrupts are turned off! Well, like that we are currently only called * on behalf of a read system call on raw device files (which are documented - * to be dangerous and for for debugging purpose only). The inode semaphore + * to be dangerous and for debugging purpose only). The inode semaphore * takes care that this is not called for the same minor device number while * we are sleeping, but access is not serialized against simultaneous read() * from the corresponding ttyI device. Can other ugly events, like changes Index: linux-omap-2.6/drivers/media/Kconfig =================================================================== --- linux-omap-2.6.orig/drivers/media/Kconfig +++ linux-omap-2.6/drivers/media/Kconfig @@ -117,7 +117,7 @@ source "drivers/media/dvb/Kconfig" config DAB boolean "DAB adapters" ---help--- - Allow selecting support for for Digital Audio Broadcasting (DAB) + Allow selecting support for Digital Audio Broadcasting (DAB) Receiver adapters. if DAB Index: linux-omap-2.6/drivers/net/bnx2x_reg.h =================================================================== --- linux-omap-2.6.orig/drivers/net/bnx2x_reg.h +++ linux-omap-2.6/drivers/net/bnx2x_reg.h @@ -3653,7 +3653,7 @@ The fields are:[4:0] - tail pointer; [10:5] - Link List size; 15:11] - header pointer. */ #define TCM_REG_XX_TABLE 0x50240 -/* [RW 4] Load value for for cfc ac credit cnt. */ +/* [RW 4] Load value for cfc ac credit cnt. */ #define TM_REG_CFC_AC_CRDCNT_VAL 0x164208 /* [RW 4] Load value for cfc cld credit cnt. */ #define TM_REG_CFC_CLD_CRDCNT_VAL 0x164210 Index: linux-omap-2.6/fs/xfs/xfs_fs.h =================================================================== --- linux-omap-2.6.orig/fs/xfs/xfs_fs.h +++ linux-omap-2.6/fs/xfs/xfs_fs.h @@ -117,7 +117,7 @@ struct getbmapx { #define BMV_IF_VALID \ (BMV_IF_ATTRFORK|BMV_IF_NO_DMAPI_READ|BMV_IF_PREALLOC|BMV_IF_DELALLOC) -/* bmv_oflags values - returned for for each non-header segment */ +/* bmv_oflags values - returned for each non-header segment */ #define BMV_OF_PREALLOC 0x1 /* segment = unwritten pre-allocation */ #define BMV_OF_DELALLOC 0x2 /* segment = delayed allocation */ #define BMV_OF_LAST 0x4 /* segment is the last in the file */ Index: linux-omap-2.6/include/linux/raid/md_k.h =================================================================== --- linux-omap-2.6.orig/include/linux/raid/md_k.h +++ linux-omap-2.6/include/linux/raid/md_k.h @@ -201,7 +201,7 @@ struct mddev_s * INTR: resync needs to be aborted for some reason * DONE: thread is done and is waiting to be reaped * REQUEST: user-space has requested a sync (used with SYNC) - * CHECK: user-space request for for check-only, no repair + * CHECK: user-space request for check-only, no repair * RESHAPE: A reshape is happening * * If neither SYNC or RESHAPE are set, then it is a recovery. Index: linux-omap-2.6/include/linux/usb.h =================================================================== --- linux-omap-2.6.orig/include/linux/usb.h +++ linux-omap-2.6/include/linux/usb.h @@ -1225,7 +1225,7 @@ typedef void (*usb_complete_t)(struct ur * @start_frame: Returns the initial frame for isochronous transfers. * @number_of_packets: Lists the number of ISO transfer buffers. * @interval: Specifies the polling interval for interrupt or isochronous - * transfers. The units are frames (milliseconds) for for full and low + * transfers. The units are frames (milliseconds) for full and low * speed devices, and microframes (1/8 millisecond) for highspeed ones. * @error_count: Returns the number of ISO transfers that reported errors. * @context: For use in completion functions. This normally points to
| |