lkml.org 
[lkml]   [2009]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
Subjectmounting cifs filesystems not possible
From
while trying to mount a  cifs filesystem on a gentoo system:

Linux brklev2b 2.6.29-gentoo-r5 #1 SMP Wed Jul 15 14:46:51 CEST 2009 i686
Intel(R) Xeon(R) CPU 5130 @ 2.00GHz GenuineIntel GNU/Linux

via mount command:

mount -t cifs -o user=aprol,password=*****,
ip=10.5.12.105 //BRKVN05/AtlasPM /mnt/AtlasPM

I get the error : "mount: Not a directory" even though the mountpoint
exists and is a valid directory

Dmesg says:

fs/cifs/cifsfs.c: Devname: //BRKVN05/AtlasPM flags: 0
fs/cifs/connect.c: CIFS VFS: in cifs_mount as Xid: 3 with uid: 0
fs/cifs/connect.c: Username: aprol
fs/cifs/connect.c: UNC: \\BRKVN05\AtlasPM ip: 10.5.12.105
fs/cifs/connect.c: Socket created
fs/cifs/connect.c: sndbuf 16384 rcvbuf 87380 rcvtimeo 0x2bc
fs/cifs/connect.c: Existing smb sess not found
fs/cifs/cifssmb.c: secFlags 0x7
fs/cifs/transport.c: For smb_command 114
fs/cifs/transport.c: Sending smb: total_len 51
fs/cifs/connect.c: Demultiplex PID: 5083
fs/cifs/connect.c: rfc1002 length 0x6f
fs/cifs/cifssmb.c: Dialect: 0
fs/cifs/cifssmb.c: negprot rc 0
fs/cifs/connect.c: Security Mode: 0x3 Capabilities: 0x1f3fd TimeAdjust:
-7200
fs/cifs/sess.c: sess setup type 2
fs/cifs/transport.c: For smb_command 115
fs/cifs/transport.c: Sending smb: total_len 242
fs/cifs/connect.c: rfc1002 length 0xc7
fs/cifs/misc.c: Null buffer passed to cifs_small_buf_release
fs/cifs/sess.c: ssetup rc from sendrecv2 is 0
fs/cifs/sess.c: UID = 14336
fs/cifs/sess.c: bleft 153
fs/cifs/sess.c: words left: 0
fs/cifs/sess.c: ssetup freeing small buf edca9740
fs/cifs/connect.c: CIFS Session Established successfully
fs/cifs/connect.c: file mode: 0x5f7 dir mode: 0x1ff
fs/cifs/transport.c: For smb_command 117
fs/cifs/transport.c: Sending smb: total_len 90
fs/cifs/connect.c: rfc1002 length 0x42
fs/cifs/connect.c: disk share connection
fs/cifs/connect.c: Tcon flags: 0x1
fs/cifs/connect.c: CIFS Tcon rc = 0
fs/cifs/cifssmb.c: In QFSDeviceInfo
fs/cifs/transport.c: For smb_command 50
fs/cifs/transport.c: Sending smb: total_len 72
fs/cifs/connect.c: rfc1002 length 0x44
fs/cifs/cifssmb.c: In QFSAttributeInfo
fs/cifs/transport.c: For smb_command 50
fs/cifs/transport.c: Sending smb: total_len 72
fs/cifs/connect.c: rfc1002 length 0x50
fs/cifs/connect.c: CIFS VFS: leaving cifs_mount (xid = 3) rc = 0
------------[ cut here ]------------
WARNING: at fs/inode.c:362 invalidate_inodes+0xa6/0xe1()
Hardware name: PowerEdge 2950
Modules linked in: cifs nfsd exportfs ncpfs bonding floppy e1000e bnx2
thermal button processor thermal_sys e1000 nfs lockd sunrpc usbhid sg
scsi_wait_scan [last unloaded: cifs]
Pid: 5082, comm: mount Tainted: G W 2.6.29-gentoo-r5 #1
Call Trace:
[<c011d251>] warn_slowpath+0x71/0xa8
[<c01158f6>] ? __wake_up+0x31/0x3b
[<f84bc7b0>] ? cifs_init_once+0xe/0x16 [cifs]
[<c01587e3>] ? cache_alloc_refill+0x62/0x434
[<c0170283>] ? generic_sync_sb_inodes+0x395/0x3a5
[<c01301de>] ? lowest_in_progress+0x43/0x4b
[<c016982a>] invalidate_inodes+0xa6/0xe1
[<c015c96b>] generic_shutdown_super+0x3c/0xda
[<c015ca4c>] kill_anon_super+0x12/0x31
[<c015cabc>] deactivate_super+0x35/0x47
[<c016c05e>] mntput_no_expire+0xc6/0xe6
[<c016c91d>] do_add_mount+0xd0/0xd8
[<c016d511>] do_mount+0x631/0x654
[<c0142138>] ? __get_free_pages+0x1e/0x24
[<c016bc53>] ? copy_mount_options+0x2a/0xf9
[<c016d59e>] sys_mount+0x6a/0xa8
[<c0102cc5>] sysenter_do_call+0x12/0x25
---[ end trace ea473e21e738f567 ]---
fs/cifs/cifsfs.c: In cifs_put_super
fs/cifs/connect.c: CIFS VFS: in cifs_put_tcon as Xid: 4 with uid: 0
fs/cifs/cifssmb.c: In tree disconnect
fs/cifs/transport.c: For smb_command 113
fs/cifs/transport.c: Sending smb: total_len 39
fs/cifs/connect.c: rfc1002 length 0x27
fs/cifs/connect.c: CIFS VFS: in cifs_put_smb_ses as Xid: 5 with uid: 0
fs/cifs/cifssmb.c: In SMBLogoff for session disconnect
fs/cifs/transport.c: For smb_command 116
fs/cifs/transport.c: Sending smb: total_len 43
fs/cifs/connect.c: rfc1002 length 0x2b

BTW -CIFS_EXPERIMENTAL is not turned on. Tried to remove that as a first
step, but I need reexporting the directory, so will have to activate it
anyhow.

any ideas what might go wrong. (mounting under an older kernel 2.6.19
worked like a charm)
thanks

Gerhard




\
 
 \ /
  Last update: 2009-07-15 17:41    [W:0.262 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site