lkml.org 
[lkml]   [2009]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectACPI on asus eeepc 701 (v2.6.28-29)
    Greetings,

    Been getting this on v2.6.28 and v2.6.29, havent
    confirmed it yet for vanilla(going to). Just wanted
    to see if this is something people has seen so
    I dont spend time fixing it.

    Its the "standard" kernel from archlinux and it appeard
    for me in 2.6.28.8 (archlinux that is).

    Best wishes
    Kristoffer


    BIOS EBDA/lowmem at: 0009fc00/0009fc00
    Linux version 2.6.28-ARCH (root@T-POWA-LX) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Sun Jan 25 10:13:11 UTC 2009
    KERNEL supported cpus:
    Intel GenuineIntel
    AMD AuthenticAMD
    NSC Geode by NSC
    Cyrix CyrixInstead
    Centaur CentaurHauls
    Transmeta GenuineTMx86
    Transmeta TransmetaCPU
    UMC UMC UMC UMC
    PAT WC disabled due to known CPU erratum.
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007f780000 (usable)
    BIOS-e820: 000000007f780000 - 000000007f790000 (ACPI data)
    BIOS-e820: 000000007f790000 - 000000007f7d0000 (ACPI NVS)
    BIOS-e820: 000000007f7d0000 - 000000007f7de000 (reserved)
    BIOS-e820: 000000007f7e0000 - 000000007f800000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    DMI present.
    AMI BIOS detected: BIOS may corrupt low RAM, working it around.
    last_pfn = 0x7f780 max_arch_pfn = 0x100000
    Scanning 0 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 000000000009fc00 (usable)
    modified: 000000000009fc00 - 00000000000a0000 (reserved)
    modified: 00000000000e4000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 000000007f780000 (usable)
    modified: 000000007f780000 - 000000007f790000 (ACPI data)
    modified: 000000007f790000 - 000000007f7d0000 (ACPI NVS)
    modified: 000000007f7d0000 - 000000007f7de000 (reserved)
    modified: 000000007f7e0000 - 000000007f800000 (reserved)
    modified: 00000000fee00000 - 00000000fee01000 (reserved)
    modified: 00000000fff80000 - 0000000100000000 (reserved)
    kernel direct mapping tables up to 377fe000 @ 10000-16000
    RAMDISK: 00e36000 - 00effa71
    ACPI: RSDP 000FBE60, 0014 (r0 ACPIAM)
    ACPI: RSDT 7F780000, 0034 (r1 A M I OEMRSDT 3000803 MSFT 97)
    ACPI: FACP 7F780200, 0081 (r1 A M I OEMFACP 3000803 MSFT 97)
    ACPI: DSDT 7F780400, 5F61 (r1 A0797 A0797000 0 INTL 20051117)
    ACPI: FACS 7F790000, 0040
    ACPI: APIC 7F780390, 0068 (r1 A M I OEMAPIC 3000803 MSFT 97)
    ACPI: OEMB 7F790040, 0046 (r1 A M I AMI_OEM 3000803 MSFT 97)
    ACPI: MCFG 7F786370, 003C (r1 A M I OEMMCFG 3000803 MSFT 97)
    ACPI: Local APIC address 0xfee00000
    1151MB HIGHMEM available.
    887MB LOWMEM available.
    mapped low ram: 0 - 377fe000
    low ram: 00000000 - 377fe000
    bootmap 00012000 - 00018f00
    (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
    #3 [0000100000 - 000055b520] TEXT DATA BSS ==> [0000100000 - 000055b520]
    #4 [0000e36000 - 0000effa71] RAMDISK ==> [0000e36000 - 0000effa71]
    #5 [000055c000 - 000055f000] INIT_PG_TABLE ==> [000055c000 - 000055f000]
    #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
    #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
    #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
    found SMP MP-table at [c00ff780] 000ff780
    Zone PFN ranges:
    DMA 0x00000010 -> 0x00001000
    Normal 0x00001000 -> 0x000377fe
    HighMem 0x000377fe -> 0x0007f780
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0007f780
    On node 0 totalpages: 521999
    free_area_init_node: node 0, pgdat c0405580, node_mem_map c1000200
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3951 pages, LIFO batch:0
    Normal zone: 1744 pages used for memmap
    Normal zone: 221486 pages, LIFO batch:31
    HighMem zone: 2304 pages used for memmap
    HighMem zone: 292482 pages, LIFO batch:31
    Movable zone: 0 pages used for memmap
    ACPI: PM-Timer IO Port: 0x808
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    SMP: Allowing 1 CPUs, 0 hotplug CPUs
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
    PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    Allocating PCI resources starting at 80000000 (gap: 7f800000:7f600000)
    PERCPU: Allocating 36864 bytes of per cpu data
    NR_CPUS: 16, nr_cpu_ids: 1, nr_node_ids 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517919
    Kernel command line: BOOT_IMAGE=safe_ext ro root=821
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Fast TSC calibration using PIT
    Detected 630.113 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Scanning for low memory corruption every 60 seconds
    Memory: 2064636k/2088448k available (2227k kernel code, 22500k reserved, 1023k data, 332k init, 1179144k highmem)
    virtual kernel memory layout:
    fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc0433000 - 0xc0486000 ( 332 kB)
    .data : 0xc032cdf9 - 0xc042cb5c (1023 kB)
    .text : 0xc0100000 - 0xc032cdf9 (2227 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Calibrating delay loop (skipped), value calculated using timer frequency.. 1260.73 BogoMIPS (lpj=2100376)
    Security Framework initialized
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 512K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 9k freed
    ACPI: Core revision 20080926
    ACPI: Checking initramfs for custom DSDT
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Celeron(R) M processor 900MHz stepping 08
    Brought up 1 CPUs
    Total of 1 processors activated (1260.73 BogoMIPS).
    net_namespace: 768 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
    PCI: Not using MMCONFIG.
    PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
    PCI: Using configuration type 1 for base access
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
    PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
    PCI: Using MMCONFIG for extended config space
    ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in poll mode
    ACPI: No dock devices found.
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:02.0: reg 10 32bit mmio: [0xf7f00000-0xf7f7ffff]
    pci 0000:00:02.0: reg 14 io port: [0xec00-0xec07]
    pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
    pci 0000:00:02.0: reg 1c 32bit mmio: [0xf7ec0000-0xf7efffff]
    pci 0000:00:02.1: reg 10 32bit mmio: [0xf7f80000-0xf7ffffff]
    pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7eb8000-0xf7ebbfff]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.2: PME# disabled
    pci 0000:00:1d.0: reg 20 io port: [0xe400-0xe41f]
    pci 0000:00:1d.1: reg 20 io port: [0xe480-0xe49f]
    pci 0000:00:1d.2: reg 20 io port: [0xe800-0xe81f]
    pci 0000:00:1d.3: reg 20 io port: [0xe880-0xe89f]
    pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7eb7c00-0xf7eb7fff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
    pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
    pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
    pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
    pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
    pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
    pci 0000:00:1f.2: reg 20 io port: [0xffa0-0xffaf]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
    pci 0000:03:00.0: reg 10 64bit mmio: [0xfbfc0000-0xfbffffff]
    pci 0000:03:00.0: reg 30 32bit mmio: [0xfbfa0000-0xfbfbffff]
    pci 0000:03:00.0: PME# supported from D3hot D3cold
    pci 0000:03:00.0: PME# disabled
    pci 0000:00:1c.1: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
    pci 0000:01:00.0: reg 10 64bit mmio: [0xfbef0000-0xfbefffff]
    pci 0000:00:1c.2: bridge 32bit mmio: [0xf8000000-0xfbefffff]
    pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf0000000-0xf6ffffff]
    pci 0000:00:1e.0: transparent bridge
    bus 00 -> node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
    PCI: Using ACPI for IRQ routing
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    hpet clockevent registered
    HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 13 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
    system 00:08: ioport range 0x380-0x383 has been reserved
    system 00:08: ioport range 0x4d0-0x4d1 has been reserved
    system 00:08: ioport range 0x800-0x87f has been reserved
    system 00:08: ioport range 0x480-0x4bf has been reserved
    system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
    system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
    system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
    system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
    system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
    system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
    system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
    system 00:0c: iomem range 0x0-0x9ffff could not be reserved
    system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
    system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
    system 00:0c: iomem range 0x100000-0x7f7fffff could not be reserved
    pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
    pci 0000:00:1c.0: IO window: disabled
    pci 0000:00:1c.0: MEM window: disabled
    pci 0000:00:1c.0: PREFETCH window: disabled
    pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
    pci 0000:00:1c.1: IO window: disabled
    pci 0000:00:1c.1: MEM window: 0xfbf00000-0xfbffffff
    pci 0000:00:1c.1: PREFETCH window: disabled
    pci 0000:00:1c.2: PCI bridge, secondary bus 0000:01
    pci 0000:00:1c.2: IO window: disabled
    pci 0000:00:1c.2: MEM window: 0xf8000000-0xfbefffff
    pci 0000:00:1c.2: PREFETCH window: 0x000000f0000000-0x000000f6ffffff
    pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
    pci 0000:00:1e.0: IO window: disabled
    pci 0000:00:1e.0: MEM window: disabled
    pci 0000:00:1e.0: PREFETCH window: disabled
    pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.1: setting latency timer to 64
    pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    pci 0000:00:1c.2: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    bus: 00 index 0 io port: [0x00-0xffff]
    bus: 00 index 1 mmio: [0x000000-0xffffffff]
    bus: 04 index 0 mmio: [0x0-0x0]
    bus: 04 index 1 mmio: [0x0-0x0]
    bus: 04 index 2 mmio: [0x0-0x0]
    bus: 04 index 3 mmio: [0x0-0x0]
    bus: 03 index 0 mmio: [0x0-0x0]
    bus: 03 index 1 mmio: [0xfbf00000-0xfbffffff]
    bus: 03 index 2 mmio: [0x0-0x0]
    bus: 03 index 3 mmio: [0x0-0x0]
    bus: 01 index 0 mmio: [0x0-0x0]
    bus: 01 index 1 mmio: [0xf8000000-0xfbefffff]
    bus: 01 index 2 mmio: [0xf0000000-0xf6ffffff]
    bus: 01 index 3 mmio: [0x0-0x0]
    bus: 05 index 0 mmio: [0x0-0x0]
    bus: 05 index 1 mmio: [0x0-0x0]
    bus: 05 index 2 mmio: [0x0-0x0]
    bus: 05 index 3 io port: [0x00-0xffff]
    bus: 05 index 4 mmio: [0x000000-0xffffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs... done
    Freeing initrd memory: 806k freed
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1732
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:00:02.0: Boot video device
    pcieport-driver 0000:00:1c.0: setting latency timer to 64
    pcieport-driver 0000:00:1c.0: found MSI capability
    pcieport-driver 0000:00:1c.0: irq 767 for MSI/MSI-X
    pci_express 0000:00:1c.0:pcie00: allocate port service
    pci_express 0000:00:1c.0:pcie02: allocate port service
    pci_express 0000:00:1c.0:pcie03: allocate port service
    pcieport-driver 0000:00:1c.1: setting latency timer to 64
    pcieport-driver 0000:00:1c.1: found MSI capability
    pcieport-driver 0000:00:1c.1: irq 766 for MSI/MSI-X
    pci_express 0000:00:1c.1:pcie00: allocate port service
    pci_express 0000:00:1c.1:pcie02: allocate port service
    pci_express 0000:00:1c.1:pcie03: allocate port service
    pcieport-driver 0000:00:1c.2: setting latency timer to 64
    pcieport-driver 0000:00:1c.2: found MSI capability
    pcieport-driver 0000:00:1c.2: irq 765 for MSI/MSI-X
    pci_express 0000:00:1c.2:pcie00: allocate port service
    pci_express 0000:00:1c.2:pcie02: allocate port service
    pci_express 0000:00:1c.2:pcie03: allocate port service
    isapnp: Scanning for PnP cards...
    Switched to high resolution mode on CPU 0
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver4 ports, IRQ sharing disabled
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    registered taskstats version 1
    Freeing unused kernel memory: 332k freed
    input: AT Translated Set 2 keyboard as /class/input/input1
    SCSI subsystem initialized
    libata version 3.00 loaded.
    pata_acpi 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    pata_acpi 0000:00:1f.2: setting latency timer to 64
    pata_acpi 0000:00:1f.2: PCI INT B disabled
    ahci 0000:00:1f.2: version 3.0
    ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ahci 0000:00:1f.2: PCI INT B disabled
    ahci: probe of 0000:00:1f.2 failed with error -22
    ata_piix 0000:00:1f.2: version 2.12
    ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
    ata_piix 0000:00:1f.2: setting latency timer to 64
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
    ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
    ata2.00: ATA-4: SILICONMOTION SM223AC, , max UDMA/66
    ata2.00: 7815024 sectors, multi 0: LBA
    ata2.00: configured for UDMA/66
    scsi 1:0:0:0: Direct-Access ATA SILICONMOTION SM n/a PQ: 0 ANSI: 5
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7eb7c00
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 8 ports detected
    uhci_hcd: USB Universal Host Controller Interface driver
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e400
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e480
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1d.3: setting latency timer to 64
    uhci_hcd 0000:00:1d.3: UHCI Host Controller
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e880
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    usb 1-3: new high speed USB device using ehci_hcd and address 3
    usb 1-3: configuration #1 chosen from 1 choice
    hub 1-3:1.0: USB hub found
    hub 1-3:1.0: 4 ports detected
    usb 1-5: new high speed USB device using ehci_hcd and address 4
    usb 1-5: configuration #1 chosen from 1 choice
    usb 1-8: new high speed USB device using ehci_hcd and address 5
    usb 1-8: configuration #1 chosen from 1 choice
    usb 2-2: new full speed USB device using uhci_hcd and address 2
    usb 2-2: configuration #1 chosen from 1 choice
    usb 1-3.1: new high speed USB device using ehci_hcd and address 6
    Driver 'sd' needs updating - please use bus_type methods
    sd 1:0:0:0: [sda] 7815024 512-byte hardware sectors: (4.00 GB/3.72 GiB)
    sd 1:0:0:0: [sda] Write Protect is off
    sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    sd 1:0:0:0: [sda] 7815024 512-byte hardware sectors: (4.00 GB/3.72 GiB)
    sd 1:0:0:0: [sda] Write Protect is off
    sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1
    sd 1:0:0:0: [sda] Attached SCSI disk
    usb 1-3.1: configuration #1 chosen from 1 choice
    usb 1-3.2: new low speed USB device using ehci_hcd and address 7
    usb 1-3.2: configuration #1 chosen from 1 choice
    usb 1-3.4: new low speed USB device using ehci_hcd and address 8
    usb 1-3.4: configuration #1 chosen from 1 choice
    Initializing USB Mass Storage driver...
    scsi2 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 4
    usb-storage: waiting for device to settle before scanning
    usb-storage: probe of 2-2:1.0 failed with error -5
    usb-storage: probe of 2-2:1.1 failed with error -5
    usb-storage: probe of 2-2:1.2 failed with error -1
    scsi6 : SCSI emulation for USB Mass Storage devices
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    usb-storage: device found at 6
    usb-storage: waiting for device to settle before scanning
    usbcore: registered new interface driver hiddev
    input: HID 04d9:1203 as /class/input/input2
    generic-usb 0003:04D9:1203.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 04d9:1203] on usb-0000:00:1d.7-3.2/input0
    input: HID 04d9:1203 as /class/input/input3
    generic-usb 0003:04D9:1203.0002: input,hidraw1: USB HID v1.11 Device [HID 04d9:1203] on usb-0000:00:1d.7-3.2/input1
    input: B16_b_02 USB-PS/2 Optical Mouse as /class/input/input4
    generic-usb 0003:046D:C025.0003: input,hidraw2: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-3.4/input0
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    scsi 2:0:0:0: Direct-Access USB2.0 CardReader SD0 0100 PQ: 0 ANSI: 0
    scsi 6:0:0:0: Direct-Access WD 10EAVS External 1.05 PQ: 0 ANSI: 4
    sd 6:0:0:0: [sdc] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
    sd 6:0:0:0: [sdc] Write Protect is off
    sd 6:0:0:0: [sdc] Mode Sense: 21 00 00 00
    sd 6:0:0:0: [sdc] Assuming drive cache: write through
    sd 6:0:0:0: [sdc] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
    sd 6:0:0:0: [sdc] Write Protect is off
    sd 6:0:0:0: [sdc] Mode Sense: 21 00 00 00
    sd 6:0:0:0: [sdc] Assuming drive cache: write through
    sdc: sdc1 sdc2
    sd 6:0:0:0: [sdc] Attached SCSI disk
    usb-storage: device scan complete
    sd 2:0:0:0: [sdb] 15954944 512-byte hardware sectors: (8.16 GB/7.60 GiB)
    sd 2:0:0:0: [sdb] Write Protect is off
    sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
    sd 2:0:0:0: [sdb] Assuming drive cache: write through
    sd 2:0:0:0: [sdb] 15954944 512-byte hardware sectors: (8.16 GB/7.60 GiB)
    sd 2:0:0:0: [sdb] Write Protect is off
    sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
    sd 2:0:0:0: [sdb] Assuming drive cache: write through
    sdb: sdb1
    sd 2:0:0:0: [sdb] Attached SCSI removable disk
    usb-storage: device scan complete
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    rtc_cmos 00:03: RTC can wake from S4
    rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
    udev: starting version 140
    udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly
    Atheros(R) L2 Ethernet Driver - version 2.2.3
    Copyright (c) 2007 Atheros Corporation.
    atl2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    atl2 0000:03:00.0: setting latency timer to 64
    cfg80211: Using static regulatory domain info
    cfg80211: Regulatory domain: US
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
    (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
    cfg80211: Calling CRDA for country: US
    ath5k_pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    ath5k_pci 0000:01:00.0: setting latency timer to 64
    ath5k_pci 0000:01:00.0: registered as 'phy0'
    phy0: Selected rate control algorithm 'pid'
    ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
    ath_hal: module license 'Proprietary' taints kernel.
    AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
    HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    HDA Intel 0000:00:1b.0: setting latency timer to 64
    ACPI: AC Adapter [AC0] (on-line)
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Battery Slot [BAT0] (battery present)
    input: Power Button (FF) as /class/input/input5
    ACPI: Power Button (FF) [PWRF]
    input: Lid Switch as /class/input/input6
    ACPI: Lid Switch [LID]
    input: Sleep Button (CM) as /class/input/input7
    ACPI: Sleep Button (CM) [SLPB]
    input: Power Button (CM) as /class/input/input8
    ACPI: Power Button (CM) [PWRB]
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI_CPU:00: registered as cooling_device0
    ACPI: Processor [CPU1] (supports 8 throttling states)
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [TZ00] (62 C)
    Linux agpgart interface v0.103
    agpgart-intel 0000:00:00.0: Intel 915GM Chipset
    agpgart-intel 0000:00:00.0: detected 7932K stolen memory
    agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    eeepc: Eee PC Hotkey Driver
    eeepc: Hotkey init flags 0x41
    eeepc: Get control methods supported: 0x101711
    input: Asus EeePC extra buttons as /class/input/input9
    input: Video Bus as /class/input/input10
    ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    usbcore: registered new interface driver usbserial
    USB Serial support registered for generic
    usbcore: registered new interface driver usbserial_generic
    usbserial: USB Serial Driver core
    USB Serial support registered for GSM modem (1-port)
    option 2-2:1.0: GSM modem (1-port) converter detected
    usb 2-2: GSM modem (1-port) converter now attached to ttyUSB0
    option 2-2:1.1: GSM modem (1-port) converter detected
    usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1
    usbcore: registered new interface driver option
    option: v0.7.2:USB Driver for GSM modems
    intel_rng: FWH not detected
    iTCO_vendor_support: vendor-support=0
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
    iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x0860)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    sd 1:0:0:0: Attached scsi generic sg0 type 0
    sd 6:0:0:0: Attached scsi generic sg1 type 0
    sd 2:0:0:0: Attached scsi generic sg2 type 0
    Linux video capture interface: v2.00
    uvcvideo: Found UVC 1.00 device <unnamed> (eb1a:2761)
    input: UVC Camera (eb1a:2761) as /class/input/input11
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v0.1.0)
    i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
    ACPI: Device needs an ACPI driver
    input: PC Speaker as /class/input/input12
    Error: Driver 'pcspkr' is already registered, aborting...
    Error: Driver 'pcspkr' is already registered, aborting...
    Marking TSC unstable due to TSC halts in idle
    Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000
    input: SynPS/2 Synaptics TouchPad as /class/input/input13
    Clocksource tsc unstable (delta = -65800588 ns)
    BUG: unable to handle kernel NULL pointer dereference at 00000000
    IP: [<f850d031>] acpi_ac_get_state+0x1b/0x59 [ac]
    *pde = 00000000
    Oops: 0000 [#1] PREEMPT SMP
    last sysfs file: /sys/devices/platform/i8042/modalias
    Modules linked in: joydev snd_pcsp psmouse i2c_i801 serio_raw i2c_core uvcvideo compat_ioctl32 videodev v4l1_compat sg iTCO_wdt iTCO_vendor_support option usbserial video output eeepc_laptop rfkill intel_agp agpgart thermal processor fan evdev button battery ac snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_hda_intel snd_hwdep snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore ath_pci wlan ath_hal(P) arc4 ecb ath5k mac80211 led_class cfg80211 atl2 rtc_cmos rtc_core rtc_lib ext3 jbd mbcache usbhid hid usb_storage sd_mod uhci_hcd ehci_hcd usbcore ata_piix ahci ata_generic pata_acpi libata scsi_mod

    Pid: 1827, comm: fsck.ext3 Tainted: P (2.6.28-ARCH #1) 701
    EIP: 0060:[<f850d031>] EFLAGS: 00010246 CPU: 0
    EIP is at acpi_ac_get_state+0x1b/0x59 [ac]
    EAX: f6869bdc EBX: 00000000 ECX: 00000000 EDX: f850d418
    ESI: f6869b80 EDI: 00000001 EBP: f68fac00 ESP: f6805f0c
    DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
    Process fsck.ext3 (pid: 1827, ti=f6804000 task=f686cc00 task.ti=f6804000)
    Stack:
    f6869bdc f6869b80 f68d7360 f850d2fd 00000001 f68d7360 c01ab0e0 00000400
    b805e000 f68fac00 f68d7380 00000000 00000000 00000001 00000000 00000000
    f7323900 fffffffb c01aafb0 f68fac00 c01cead4 f6805fa0 00000400 b805e000
    Call Trace:
    [<f850d2fd>] acpi_ac_seq_show+0x12/0x5d [ac]
    [<c01ab0e0>] seq_read+0x130/0x2e0
    [<c01aafb0>] seq_read+0x0/0x2e0
    [<c01cead4>] proc_reg_read+0x64/0xa0
    [<c01cea70>] proc_reg_read+0x0/0xa0
    [<c019346d>] vfs_read+0x9d/0x160
    [<c0193601>] sys_read+0x41/0x80
    [<c0103f13>] sysenter_do_call+0x12/0x33
    [<c0320000>] serial_pnp_probe+0x150/0x250
    Code: b8 ea ff ff ff 75 07 8b 43 5c 89 01 31 c0 5b c3 56 89 c6 85 f6 b8 ea ff ff ff 53 74 49 8b 5e 58 8d 46 5c 31 c9 50 ba 18 d4 50 f8 <8b> 03 e8 e0 be d2 c7 89 c2 58 31 c0 85 d2 74 2b 68 1d d4 50 f8
    EIP: [<f850d031>] acpi_ac_get_state+0x1b/0x59 [ac] SS:ESP 0068:f6805f0c
    ---[ end trace afc201c038e23db4 ]---
    EXT3 FS on sdc1, internal journal
    Adding 49022336k swap on /dev/sdc2. Priority:-1 extents:1 across:49022336k
    warning: `syslog-ng' uses 32-bit capabilities (legacy support in use)
    atl2 0000:03:00.0: irq 764 for MSI/MSI-X
    [drm] Initialized drm 1.1.0 20060810
    pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:02.0: setting latency timer to 64
    [drm:i915_gem_detect_bit_6_swizzle] *ERROR* Couldn't read from MCHBAR. Disabling tiling.
    [drm] Initialized i915 1.6.0 20080730 on minor 0
    mtrr: no MTRR for d0000000,10000000 found
    PPP generic driver version 2.4.2
    PPP BSD Compression module registered
    PPP Deflate Compression module registered
    mtrr: no MTRR for d0000000,10000000 found
    mtrr: no MTRR for d0000000,10000000 found
    mtrr: no MTRR for d0000000,10000000 found
    ipv6: Unknown symbol xfrm_audit_state_notfound_simple
    ipv6: Unknown symbol xfrm_audit_state_notfound_simple


    --
    Kristoffer Ericson <kristoffer.ericson@gmail.com>


    \
     
     \ /
      Last update: 2009-04-05 23:31    [W:0.072 / U:0.904 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site