lkml.org 
[lkml]   [2009]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH] OMAP: HSMMC: Do not enable buffer ready interrupt if using DMA
From: Anand Gadiyar <gadiyar@ti.com>

OMAP: HSMMC: Do not enable buffer ready interrupt if using DMA

This considerably reduces the number of interrupts during a transfer
and ought to result in some power saving.

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
---
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index e62a22a..2d83807 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -70,6 +70,8 @@
#define DTO_MASK 0x000F0000
#define DTO_SHIFT 16
#define INT_EN_MASK 0x307F0033
+#define BWR_ENABLE (1 << 4)
+#define BRR_ENABLE (1 << 5)
#define INIT_STREAM (1 << 1)
#define DP_SELECT (1 << 21)
#define DDIR (1 << 4)
@@ -241,7 +243,12 @@ mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd,
*/
OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK);
- OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK);
+
+ if (host->use_dma)
+ OMAP_HSMMC_WRITE(host->base, IE,
+ INT_EN_MASK & ~(BRR_ENABLE | BWR_ENABLE));
+ else
+ OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK);

host->response_busy = 0;
if (cmd->flags & MMC_RSP_PRESENT) {

\
 
 \ /
  Last update: 2009-04-21 09:43    [W:2.065 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site