lkml.org 
[lkml]   [2009]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject2.6.29 - raid10 issue - spares do not get synched automatically
Hello,

I am using 2.6.29 on a debian lenny. Anyway, I am having problems with a
raid10 sandbox setup consisting of 4 loopback devices. To make a long
story short:

I created a raid10 array with all these 4 devices (loop0-loop3)
then I set two devices faulty, removed them .. checked if I can still
write to the array (which I could, so I/O errors, nothing in dmesg):

BUT - here it comes: once I am trying to (re)add them (I zero'ed the
superblock before) they're only getting added as spares and the array
will not sync.

Here's the logfile with mdadm -D /dev/md0 in between so one can see what
is going on:

http://paste.debian.net/31758/


Any ideas?


PS: Please CC to me since I am not subscribed.


regards,
Patrick


\
 
 \ /
  Last update: 2009-03-28 12:59    [W:0.046 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site