lkml.org 
[lkml]   [2009]   [Dec]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Fdutils] DMA cache consistency bug introduced in 2.6.28 (Was: Re: Cannot format floppies under kernel 2.6.*?)
On 12/18/2009 03:15 PM, Linus Torvalds wrote:
>
>
> On Fri, 18 Dec 2009, Mark Hounschell wrote:
>>
>> It looks like I may have to back up and first find the points that, let me,
>> and stop me, booting with the HPET enabled. Before I change direction, can
>> the git-bisect start sequence use the SHA1 id for the starting 'goods' and
>> 'bads'? I don't see reference to that in the doc.
>
> You can always use a SHA1 id instead of a tag. So when you did
>
> git bisect good v2.6.17.4
>
> you could always have replaced that "v2.6.17.4" with the SHA1 of the
> commit.
>
> In git, the SHA1 ID's are the "real" names - the tags and branch names are
> purely for human-readable decoration. Git always turns them into SHA1 id's
> internally.
>
> Linus
>

Ok, I may have something that might help.

# git bisect bad
26afe5f2fbf06ea0765aaa316640c4dd472310c0 is the first bad commit
commit 26afe5f2fbf06ea0765aaa316640c4dd472310c0
Author: venkatesh.pallipadi@intel.com <venkatesh.pallipadi@intel.com>
Date: Fri Sep 5 18:02:18 2008 -0700

x86: HPET_MSI Initialise per-cpu HPET timers

Initialize a per CPU HPET MSI timer when possible. We retain the HPET
timer 0 (IRQ 0) and timer 1 (IRQ 8) as is when legacy mode is being
used. We
setup the remaining HPET timers as per CPU MSI based timers. This per CPU
timer will eliminate the need for timer broadcasting with IRQ 0 when there
is non-functional LAPIC timer across CPU deep C-states.

If there are more CPUs than number of available timers, CPUs that do not
find any timer to use will continue using LAPIC and IRQ 0 broadcast.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

:040000 040000 b0a11fa0abdc591427e78236a1f25f26b824140e
f2e9b13cf9e2eb7e0fc101660b1e1d499033d78f M arch


And of coarse this was the first commit that I could not boot if I had hpet
enabled. To get this one to boot (single user mode only) I had to add the
the quiet cmdline option and following patch from to arch/x86/kernel/hpet.c

commit 5ceb1a04187553e08c6ab60d30cee7c454ee139a

@ -445,7 +445,7 @@ static int hpet_setup_irq(struct hpet_dev *dev)
{

if (request_irq(dev->irq, hpet_interrupt_handler,
- IRQF_SHARED|IRQF_NOBALANCING, dev->name, dev))
+ IRQF_DISABLED|IRQF_NOBALANCING, dev->name, dev))
return -1;

disable_irq(dev->irq);


AND add the quiet cmdline option.

Also, of all the machines it does work on with hpets enabled, I don't see
the HPET2 in /proc/interupts as below.


cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
0: 82 0 3 0 IO-APIC-edge timer
1: 0 0 1712 6 IO-APIC-edge i8042
3: 0 0 6 0 IO-APIC-edge
4: 0 0 6 0 IO-APIC-edge
6: 0 0 4 0 IO-APIC-edge floppy
8: 0 0 60 0 IO-APIC-edge rtc0
9: 0 0 0 0 IO-APIC-fasteoi acpi
12: 0 0 37798 179 IO-APIC-edge i8042
14: 0 0 16462 71 IO-APIC-edge
pata_atiixp
15: 0 0 5713 17 IO-APIC-edge
pata_atiixp
16: 0 0 904 2 IO-APIC-fasteoi
aic79xx, ohci_hcd:usb2, ohci_hcd:usb4, HDA Intel, ni-pci-gpib
17: 0 0 2 0 IO-APIC-fasteoi
ehci_hcd:usb1, parport0, ni-pci-gpib
18: 0 0 49940 90 IO-APIC-fasteoi
ohci_hcd:usb5, ohci_hcd:usb6, ohci_hcd:usb7, nvidia
19: 0 0 703 2 IO-APIC-fasteoi
aic7xxx, ehci_hcd:usb3, ttySLG0, eth1
22: 0 0 1303 15 IO-APIC-fasteoi ahci


24: 261763 0 0 0 HPET_MSI-edge hpet2


29: 0 0 220 5 PCI-MSI-edge
sky2@pci:0000:04:00.0
NMI: 0 0 0 0 Non-maskable interrupts
LOC: 138 271356 264446 261050 Local timer interrupts
SPU: 0 0 0 0 Spurious interrupts
PMI: 0 0 0 0 Performance monitoring
interrupts
PND: 0 0 0 0 Performance pending work
RES: 4511 9275 8470 8086 Rescheduling interrupts
CAL: 3624 8666 523 4543 Function call interrupts
TLB: 981 1111 1065 1058 TLB shootdowns
ERR: 0
MIS: 0


Regards
Mark


\
 
 \ /
  Last update: 2009-12-22 16:15    [W:0.149 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site