lkml.org 
[lkml]   [2009]   [Dec]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Fdutils] DMA cache consistency bug introduced in 2.6.28 (Was: Re: Cannot format floppies under kernel 2.6.*?)

[ Ingo, Venki and Shaohua added to cc: see the whole thread on lkml for
details, but Mark is basically chasing down a situation where the floppy
driver seems to have trouble formatting floppies, and it happened
between 2.6.27 and .28. The trouble seems to be that a DMA transfer of a
memory block transfers the wrong value for the first byte of the block.

Which should be impossible, but whatever. Some part of the system has a
cached buffer that isn't flushed.

What gets _you_ guys involved is that Mark cannot reproduce the bug if
HPET is disabled in the BIOS or by using 'nohpet'. He found that out by
pure luck while bisecting, because some time during his bisect, his
machine wouldn't even boot with HPET.

So the problem is: with HPET enabled, 2.6.27.4 _used_ to work. But
2.6.28 (and current -git) does not. Any ideas? ]

On Tue, 22 Dec 2009, Mark Hounschell wrote:
>
> Ok, I may have something that might help.
>
> # git bisect bad
> 26afe5f2fbf06ea0765aaa316640c4dd472310c0 is the first bad commit
> commit 26afe5f2fbf06ea0765aaa316640c4dd472310c0
> Author: venkatesh.pallipadi@intel.com <venkatesh.pallipadi@intel.com>
> Date: Fri Sep 5 18:02:18 2008 -0700
>
> x86: HPET_MSI Initialise per-cpu HPET timers
>
> Initialize a per CPU HPET MSI timer when possible. We retain the HPET
> timer 0 (IRQ 0) and timer 1 (IRQ 8) as is when legacy mode is being used. We
> setup the remaining HPET timers as per CPU MSI based timers. This per CPU
> timer will eliminate the need for timer broadcasting with IRQ 0 when there
> is non-functional LAPIC timer across CPU deep C-states.
>
> If there are more CPUs than number of available timers, CPUs that do not
> find any timer to use will continue using LAPIC and IRQ 0 broadcast.
>
> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
> Signed-off-by: Shaohua Li <shaohua.li@intel.com>
> Signed-off-by: Ingo Molnar <mingo@elte.hu>
>
> And of coarse this was the first commit that I could not boot if I had hpet
> enabled. To get this one to boot (single user mode only) I had to add the
> the quiet cmdline option and following patch from to arch/x86/kernel/hpet.c
>
> commit 5ceb1a04187553e08c6ab60d30cee7c454ee139a
>
> @ -445,7 +445,7 @@ static int hpet_setup_irq(struct hpet_dev *dev)
> {
>
> if (request_irq(dev->irq, hpet_interrupt_handler,
> - IRQF_SHARED|IRQF_NOBALANCING, dev->name, dev))
> + IRQF_DISABLED|IRQF_NOBALANCING, dev->name, dev))
> return -1;
>
> disable_irq(dev->irq);
>
> AND add the quiet cmdline option.

Ok, so we know why HPET didn't boot for you, and that was fixed later (by
that 5ceb1a04). But is this also when the floppy started mis-behaving?

IOW, _if_ you boot with that fix from commit 5ceb1a04 (and the quiet
option - I wonder what that is about: do you have any ideas?), is the
per-CPU HPET timer commit also the commit that causes floppy problems, or
is this purely a "bisect when HPET became a boot-up problem"?

Linus

---
> Also, of all the machines it does work on with hpets enabled, I don't see
> the HPET2 in /proc/interupts as below.
>
>
> cat /proc/interrupts
> CPU0 CPU1 CPU2 CPU3
> 0: 82 0 3 0 IO-APIC-edge timer
> 1: 0 0 1712 6 IO-APIC-edge i8042
> 3: 0 0 6 0 IO-APIC-edge
> 4: 0 0 6 0 IO-APIC-edge
> 6: 0 0 4 0 IO-APIC-edge floppy
> 8: 0 0 60 0 IO-APIC-edge rtc0
> 9: 0 0 0 0 IO-APIC-fasteoi acpi
> 12: 0 0 37798 179 IO-APIC-edge i8042
> 14: 0 0 16462 71 IO-APIC-edge pata_atiixp
> 15: 0 0 5713 17 IO-APIC-edge pata_atiixp
> 16: 0 0 904 2 IO-APIC-fasteoi aic79xx, ohci_hcd:usb2, ohci_hcd:usb4, HDA Intel, ni-pci-gpib
> 17: 0 0 2 0 IO-APIC-fasteoi ehci_hcd:usb1, parport0, ni-pci-gpib
> 18: 0 0 49940 90 IO-APIC-fasteoi ohci_hcd:usb5, ohci_hcd:usb6, ohci_hcd:usb7, nvidia
> 19: 0 0 703 2 IO-APIC-fasteoi aic7xxx, ehci_hcd:usb3, ttySLG0, eth1
> 22: 0 0 1303 15 IO-APIC-fasteoi ahci
>
> 24: 261763 0 0 0 HPET_MSI-edge hpet2
>
> 29: 0 0 220 5 PCI-MSI-edge sky2@pci:0000:04:00.0
> NMI: 0 0 0 0 Non-maskable interrupts
> LOC: 138 271356 264446 261050 Local timer interrupts
> SPU: 0 0 0 0 Spurious interrupts
> PMI: 0 0 0 0 Performance monitoring interrupts
> PND: 0 0 0 0 Performance pending work
> RES: 4511 9275 8470 8086 Rescheduling interrupts
> CAL: 3624 8666 523 4543 Function call interrupts
> TLB: 981 1111 1065 1058 TLB shootdowns
> ERR: 0
> MIS: 0


\
 
 \ /
  Last update: 2009-12-22 18:41    [W:0.134 / U:0.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site