lkml.org 
[lkml]   [2009]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    Date
    From
    Subject[PATCH] eXcite: Remove platform support and drivers.
    The platform has never been fully merged.  Remove it including MTD and
    watchdog drivers.

    Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
    ---
    I'd like acks from the watchdog and MTD maintainers please.

    arch/mips/Kconfig | 18
    arch/mips/Makefile | 7
    arch/mips/basler/excite/Kconfig | 9
    arch/mips/basler/excite/Makefile | 8
    arch/mips/basler/excite/excite_device.c | 403 ----
    arch/mips/basler/excite/excite_iodev.c | 178 -
    arch/mips/basler/excite/excite_iodev.h | 10
    arch/mips/basler/excite/excite_irq.c | 122 -
    arch/mips/basler/excite/excite_procfs.c | 92
    arch/mips/basler/excite/excite_prom.c | 144 -
    arch/mips/basler/excite/excite_setup.c | 302 ---
    arch/mips/configs/ar7_defconfig | 1
    arch/mips/configs/bcm47xx_defconfig | 1
    arch/mips/configs/bcm63xx_defconfig | 1
    arch/mips/configs/bigsur_defconfig | 1
    arch/mips/configs/capcella_defconfig | 1
    arch/mips/configs/cavium-octeon_defconfig | 1
    arch/mips/configs/cobalt_defconfig | 1
    arch/mips/configs/db1000_defconfig | 1
    arch/mips/configs/db1100_defconfig | 1
    arch/mips/configs/db1200_defconfig | 1
    arch/mips/configs/db1500_defconfig | 1
    arch/mips/configs/db1550_defconfig | 1
    arch/mips/configs/decstation_defconfig | 1
    arch/mips/configs/e55_defconfig | 1
    arch/mips/configs/excite_defconfig | 1335 --------------
    arch/mips/configs/fuloong2e_defconfig | 1
    arch/mips/configs/ip22_defconfig | 1
    arch/mips/configs/ip27_defconfig | 1
    arch/mips/configs/ip28_defconfig | 1
    arch/mips/configs/ip32_defconfig | 1
    arch/mips/configs/jazz_defconfig | 1
    arch/mips/configs/jmr3927_defconfig | 1
    arch/mips/configs/lasat_defconfig | 1
    arch/mips/configs/lemote2f_defconfig | 1
    arch/mips/configs/malta_defconfig | 1
    arch/mips/configs/markeins_defconfig | 1
    arch/mips/configs/mipssim_defconfig | 1
    arch/mips/configs/mpc30x_defconfig | 1
    arch/mips/configs/msp71xx_defconfig | 1
    arch/mips/configs/mtx1_defconfig | 1
    arch/mips/configs/pb1100_defconfig | 1
    arch/mips/configs/pb1500_defconfig | 1
    arch/mips/configs/pb1550_defconfig | 1
    arch/mips/configs/pnx8335-stb225_defconfig | 1
    arch/mips/configs/pnx8550-jbs_defconfig | 1
    arch/mips/configs/pnx8550-stb810_defconfig | 1
    arch/mips/configs/powertv_defconfig | 1
    arch/mips/configs/rb532_defconfig | 1
    arch/mips/configs/rbtx49xx_defconfig | 1
    arch/mips/configs/rm200_defconfig | 1
    arch/mips/configs/sb1250-swarm_defconfig | 1
    arch/mips/configs/tb0219_defconfig | 1
    arch/mips/configs/tb0226_defconfig | 1
    arch/mips/configs/tb0287_defconfig | 1
    arch/mips/configs/workpad_defconfig | 1
    arch/mips/configs/wrppmc_defconfig | 1
    arch/mips/configs/yosemite_defconfig | 1
    arch/mips/include/asm/mach-excite/cpu-feature-overrides.h | 48
    arch/mips/include/asm/mach-excite/excite.h | 154 -
    arch/mips/include/asm/mach-excite/excite_fpga.h | 80
    arch/mips/include/asm/mach-excite/excite_nandflash.h | 7
    arch/mips/include/asm/mach-excite/rm9k_eth.h | 23
    arch/mips/include/asm/mach-excite/rm9k_wdt.h | 12
    arch/mips/include/asm/mach-excite/rm9k_xicap.h | 16
    arch/mips/include/asm/mach-excite/war.h | 25
    arch/mips/pci/Makefile | 1
    arch/mips/pci/fixup-excite.c | 36
    arch/mips/pci/pci-excite.c | 149 -
    drivers/mtd/nand/Kconfig | 8
    drivers/mtd/nand/Makefile | 1
    drivers/mtd/nand/excite_nandflash.c | 248 --
    drivers/watchdog/Kconfig | 10
    drivers/watchdog/Makefile | 1
    drivers/watchdog/rm9k_wdt.c | 419 ----
    75 files changed, 3912 deletions(-)

    Index: linux-queue/arch/mips/Kconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/Kconfig
    +++ linux-queue/arch/mips/Kconfig
    @@ -50,23 +50,6 @@ config AR7
    Support for the Texas Instruments AR7 System-on-a-Chip
    family: TNETD7100, 7200 and 7300.

    -config BASLER_EXCITE
    - bool "Basler eXcite smart camera"
    - select CEVT_R4K
    - select CSRC_R4K
    - select DMA_COHERENT
    - select HW_HAS_PCI
    - select IRQ_CPU
    - select IRQ_CPU_RM7K
    - select IRQ_CPU_RM9K
    - select MIPS_RM9122
    - select SYS_HAS_CPU_RM9000
    - select SYS_SUPPORTS_32BIT_KERNEL
    - select SYS_SUPPORTS_BIG_ENDIAN
    - help
    - The eXcite is a smart camera platform manufactured by
    - Basler Vision Technologies AG.
    -
    config BCM47XX
    bool "BCM47XX based boards"
    select CEVT_R4K
    @@ -701,7 +684,6 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
    endchoice

    source "arch/mips/alchemy/Kconfig"
    -source "arch/mips/basler/excite/Kconfig"
    source "arch/mips/bcm63xx/Kconfig"
    source "arch/mips/jazz/Kconfig"
    source "arch/mips/lasat/Kconfig"
    Index: linux-queue/arch/mips/basler/excite/Kconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/basler/excite/Kconfig
    +++ /dev/null
    @@ -1,9 +0,0 @@
    -config BASLER_EXCITE_PROTOTYPE
    - bool "Support for pre-release units"
    - depends on BASLER_EXCITE
    - default n
    - help
    - Pre-series (prototype) units are different from later ones in
    - some ways. Select this option if you have one of these. Please
    - note that a kernel built with this option selected will not be
    - able to run on normal units.
    Index: linux-queue/arch/mips/basler/excite/Makefile
    ===================================================================
    --- linux-queue.orig/arch/mips/basler/excite/Makefile
    +++ /dev/null
    @@ -1,8 +0,0 @@
    -#
    -# Makefile for Basler eXcite
    -#
    -
    -obj-$(CONFIG_BASLER_EXCITE) += excite_irq.o excite_prom.o excite_setup.o \
    - excite_device.o excite_procfs.o
    -
    -obj-m += excite_iodev.o
    Index: linux-queue/arch/mips/basler/excite/excite_device.c
    ===================================================================
    --- linux-queue.orig/arch/mips/basler/excite/excite_device.c
    +++ /dev/null
    @@ -1,403 +0,0 @@
    -/*
    - * Copyright (C) 2004 by Basler Vision Technologies AG
    - * Author: Thomas Koeller <thomas.koeller@baslerweb.com>
    - *
    - * This program is free software; you can redistribute it and/or modify
    - * it under the terms of the GNU General Public License as published by
    - * the Free Software Foundation; either version 2 of the License, or
    - * (at your option) any later version.
    - *
    - * This program is distributed in the hope that it will be useful,
    - * but WITHOUT ANY WARRANTY; without even the implied warranty of
    - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
    - * GNU General Public License for more details.
    - *
    - * You should have received a copy of the GNU General Public License
    - * along with this program; if not, write to the Free Software
    - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
    - */
    -
    -#include <linux/kernel.h>
    -#include <linux/init.h>
    -#include <linux/platform_device.h>
    -#include <linux/ioport.h>
    -#include <linux/err.h>
    -#include <linux/jiffies.h>
    -#include <linux/sched.h>
    -#include <asm/types.h>
    -#include <asm/rm9k-ocd.h>
    -
    -#include <excite.h>
    -#include <rm9k_eth.h>
    -#include <rm9k_wdt.h>
    -#include <rm9k_xicap.h>
    -#include <excite_nandflash.h>
    -
    -#include "excite_iodev.h"
    -
    -#define RM9K_GE_UNIT 0
    -#define XICAP_UNIT 0
    -#define NAND_UNIT 0
    -
    -#define DLL_TIMEOUT 3 /* seconds */
    -
    -
    -#define RINIT(__start__, __end__, __name__, __parent__) { \
    - .name = __name__ "_0", \
    - .start = (__start__), \
    - .end = (__end__), \
    - .flags = 0, \
    - .parent = (__parent__) \
    -}
    -
    -#define RINIT_IRQ(__irq__, __name__) { \
    - .name = __name__ "_0", \
    - .start = (__irq__), \
    - .end = (__irq__), \
    - .flags = IORESOURCE_IRQ, \
    - .parent = NULL \
    -}
    -
    -
    -
    -enum {
    - slice_xicap,
    - slice_eth
    -};
    -
    -
    -
    -static struct resource
    - excite_ctr_resource __maybe_unused = {
    - .name = "GPI counters",
    - .start = 0,
    - .end = 5,
    - .flags = 0,
    - .parent = NULL,
    - .sibling = NULL,
    - .child = NULL
    - },
    - excite_gpislice_resource __maybe_unused = {
    - .name = "GPI slices",
    - .start = 0,
    - .end = 1,
    - .flags = 0,
    - .parent = NULL,
    - .sibling = NULL,
    - .child = NULL
    - },
    - excite_mdio_channel_resource __maybe_unused = {
    - .name = "MDIO channels",
    - .start = 0,
    - .end = 1,
    - .flags = 0,
    - .parent = NULL,
    - .sibling = NULL,
    - .child = NULL
    - },
    - excite_fifomem_resource __maybe_unused = {
    - .name = "FIFO memory",
    - .start = 0,
    - .end = 767,
    - .flags = 0,
    - .parent = NULL,
    - .sibling = NULL,
    - .child = NULL
    - },
    - excite_scram_resource __maybe_unused = {
    - .name = "Scratch RAM",
    - .start = EXCITE_PHYS_SCRAM,
    - .end = EXCITE_PHYS_SCRAM + EXCITE_SIZE_SCRAM - 1,
    - .flags = IORESOURCE_MEM,
    - .parent = NULL,
    - .sibling = NULL,
    - .child = NULL
    - },
    - excite_fpga_resource __maybe_unused = {
    - .name = "System FPGA",
    - .start = EXCITE_PHYS_FPGA,
    - .end = EXCITE_PHYS_FPGA + EXCITE_SIZE_FPGA - 1,
    - .flags = IORESOURCE_MEM,
    - .parent = NULL,
    - .sibling = NULL,
    - .child = NULL
    - },
    - excite_nand_resource __maybe_unused = {
    - .name = "NAND flash control",
    - .start = EXCITE_PHYS_NAND,
    - .end = EXCITE_PHYS_NAND + EXCITE_SIZE_NAND - 1,
    - .flags = IORESOURCE_MEM,
    - .parent = NULL,
    - .sibling = NULL,
    - .child = NULL
    - },
    - excite_titan_resource __maybe_unused = {
    - .name = "TITAN registers",
    - .start = EXCITE_PHYS_TITAN,
    - .end = EXCITE_PHYS_TITAN + EXCITE_SIZE_TITAN - 1,
    - .flags = IORESOURCE_MEM,
    - .parent = NULL,
    - .sibling = NULL,
    - .child = NULL
    - };
    -
    -
    -
    -static void adjust_resources(struct resource *res, unsigned int n)
    -{
    - struct resource *p;
    - const unsigned long mask = IORESOURCE_IO | IORESOURCE_MEM
    - | IORESOURCE_IRQ | IORESOURCE_DMA;
    -
    - for (p = res; p < res + n; p++) {
    - const struct resource * const parent = p->parent;
    - if (parent) {
    - p->start += parent->start;
    - p->end += parent->start;
    - p->flags = parent->flags & mask;
    - }
    - }
    -}
    -
    -
    -
    -#if defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE)
    -static struct resource xicap_rsrc[] = {
    - RINIT(0x4840, 0x486f, XICAP_RESOURCE_FIFO_RX, &excite_titan_resource),
    - RINIT(0x4940, 0x494b, XICAP_RESOURCE_FIFO_TX, &excite_titan_resource),
    - RINIT(0x5040, 0x5127, XICAP_RESOURCE_XDMA, &excite_titan_resource),
    - RINIT(0x1000, 0x112f, XICAP_RESOURCE_PKTPROC, &excite_titan_resource),
    - RINIT(0x1100, 0x110f, XICAP_RESOURCE_PKT_STREAM, &excite_fpga_resource),
    - RINIT(0x0800, 0x0bff, XICAP_RESOURCE_DMADESC, &excite_scram_resource),
    - RINIT(slice_xicap, slice_xicap, XICAP_RESOURCE_GPI_SLICE, &excite_gpislice_resource),
    - RINIT(0x0100, 0x02ff, XICAP_RESOURCE_FIFO_BLK, &excite_fifomem_resource),
    - RINIT_IRQ(TITAN_IRQ, XICAP_RESOURCE_IRQ)
    -};
    -
    -static struct platform_device xicap_pdev = {
    - .name = XICAP_NAME,
    - .id = XICAP_UNIT,
    - .num_resources = ARRAY_SIZE(xicap_rsrc),
    - .resource = xicap_rsrc
    -};
    -
    -/*
    - * Create a platform device for the GPI port that receives the
    - * image data from the embedded camera.
    - */
    -static int __init xicap_devinit(void)
    -{
    - unsigned long tend;
    - u32 reg;
    - int retval;
    -
    - adjust_resources(xicap_rsrc, ARRAY_SIZE(xicap_rsrc));
    -
    - /* Power up the slice and configure it. */
    - reg = titan_readl(CPTC1R);
    - reg &= ~(0x11100 << slice_xicap);
    - titan_writel(reg, CPTC1R);
    -
    - /* Enable slice & DLL. */
    - reg= titan_readl(CPRR);
    - reg &= ~(0x00030003 << (slice_xicap * 2));
    - titan_writel(reg, CPRR);
    -
    - /* Wait for DLLs to lock */
    - tend = jiffies + DLL_TIMEOUT * HZ;
    - while (time_before(jiffies, tend)) {
    - if (!(~titan_readl(CPDSR) & (0x1 << (slice_xicap * 4))))
    - break;
    - yield();
    - }
    -
    - if (~titan_readl(CPDSR) & (0x1 << (slice_xicap * 4))) {
    - printk(KERN_ERR "%s: DLL not locked after %u seconds\n",
    - xicap_pdev.name, DLL_TIMEOUT);
    - retval = -ETIME;
    - } else {
    - /* Register platform device */
    - retval = platform_device_register(&xicap_pdev);
    - }
    -
    - return retval;
    -}
    -
    -device_initcall(xicap_devinit);
    -#endif /* defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE) */
    -
    -
    -
    -#if defined(CONFIG_WDT_RM9K_GPI) || defined(CONFIG_WDT_RM9K_GPI_MODULE)
    -static struct resource wdt_rsrc[] = {
    - RINIT(0, 0, WDT_RESOURCE_COUNTER, &excite_ctr_resource),
    - RINIT(0x0084, 0x008f, WDT_RESOURCE_REGS, &excite_titan_resource),
    - RINIT_IRQ(TITAN_IRQ, WDT_RESOURCE_IRQ)
    -};
    -
    -static struct platform_device wdt_pdev = {
    - .name = WDT_NAME,
    - .id = -1,
    - .num_resources = ARRAY_SIZE(wdt_rsrc),
    - .resource = wdt_rsrc
    -};
    -
    -/*
    - * Create a platform device for the GPI port that receives the
    - * image data from the embedded camera.
    - */
    -static int __init wdt_devinit(void)
    -{
    - adjust_resources(wdt_rsrc, ARRAY_SIZE(wdt_rsrc));
    - return platform_device_register(&wdt_pdev);
    -}
    -
    -device_initcall(wdt_devinit);
    -#endif /* defined(CONFIG_WDT_RM9K_GPI) || defined(CONFIG_WDT_RM9K_GPI_MODULE) */
    -
    -
    -
    -static struct resource excite_nandflash_rsrc[] = {
    - RINIT(0x2000, 0x201f, EXCITE_NANDFLASH_RESOURCE_REGS, &excite_nand_resource)
    -};
    -
    -static struct platform_device excite_nandflash_pdev = {
    - .name = "excite_nand",
    - .id = NAND_UNIT,
    - .num_resources = ARRAY_SIZE(excite_nandflash_rsrc),
    - .resource = excite_nandflash_rsrc
    -};
    -
    -/*
    - * Create a platform device for the access to the nand-flash
    - * port
    - */
    -static int __init excite_nandflash_devinit(void)
    -{
    - adjust_resources(excite_nandflash_rsrc, ARRAY_SIZE(excite_nandflash_rsrc));
    -
    - /* nothing to be done here */
    -
    - /* Register platform device */
    - return platform_device_register(&excite_nandflash_pdev);
    -}
    -
    -device_initcall(excite_nandflash_devinit);
    -
    -
    -
    -static struct resource iodev_rsrc[] = {
    - RINIT_IRQ(FPGA1_IRQ, IODEV_RESOURCE_IRQ)
    -};
    -
    -static struct platform_device io_pdev = {
    - .name = IODEV_NAME,
    - .id = -1,
    - .num_resources = ARRAY_SIZE(iodev_rsrc),
    - .resource = iodev_rsrc
    -};
    -
    -/*
    - * Create a platform device for the external I/O ports.
    - */
    -static int __init io_devinit(void)
    -{
    - adjust_resources(iodev_rsrc, ARRAY_SIZE(iodev_rsrc));
    - return platform_device_register(&io_pdev);
    -}
    -
    -device_initcall(io_devinit);
    -
    -
    -
    -
    -#if defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE)
    -static struct resource rm9k_ge_rsrc[] = {
    - RINIT(0x2200, 0x27ff, RM9K_GE_RESOURCE_MAC, &excite_titan_resource),
    - RINIT(0x1800, 0x1fff, RM9K_GE_RESOURCE_MSTAT, &excite_titan_resource),
    - RINIT(0x2000, 0x212f, RM9K_GE_RESOURCE_PKTPROC, &excite_titan_resource),
    - RINIT(0x5140, 0x5227, RM9K_GE_RESOURCE_XDMA, &excite_titan_resource),
    - RINIT(0x4870, 0x489f, RM9K_GE_RESOURCE_FIFO_RX, &excite_titan_resource),
    - RINIT(0x494c, 0x4957, RM9K_GE_RESOURCE_FIFO_TX, &excite_titan_resource),
    - RINIT(0x0000, 0x007f, RM9K_GE_RESOURCE_FIFOMEM_RX, &excite_fifomem_resource),
    - RINIT(0x0080, 0x00ff, RM9K_GE_RESOURCE_FIFOMEM_TX, &excite_fifomem_resource),
    - RINIT(0x0180, 0x019f, RM9K_GE_RESOURCE_PHY, &excite_titan_resource),
    - RINIT(0x0000, 0x03ff, RM9K_GE_RESOURCE_DMADESC_RX, &excite_scram_resource),
    - RINIT(0x0400, 0x07ff, RM9K_GE_RESOURCE_DMADESC_TX, &excite_scram_resource),
    - RINIT(slice_eth, slice_eth, RM9K_GE_RESOURCE_GPI_SLICE, &excite_gpislice_resource),
    - RINIT(0, 0, RM9K_GE_RESOURCE_MDIO_CHANNEL, &excite_mdio_channel_resource),
    - RINIT_IRQ(TITAN_IRQ, RM9K_GE_RESOURCE_IRQ_MAIN),
    - RINIT_IRQ(PHY_IRQ, RM9K_GE_RESOURCE_IRQ_PHY)
    -};
    -
    -static struct platform_device rm9k_ge_pdev = {
    - .name = RM9K_GE_NAME,
    - .id = RM9K_GE_UNIT,
    - .num_resources = ARRAY_SIZE(rm9k_ge_rsrc),
    - .resource = rm9k_ge_rsrc
    -};
    -
    -
    -
    -/*
    - * Create a platform device for the Ethernet port.
    - */
    -static int __init rm9k_ge_devinit(void)
    -{
    - u32 reg;
    -
    - adjust_resources(rm9k_ge_rsrc, ARRAY_SIZE(rm9k_ge_rsrc));
    -
    - /* Power up the slice and configure it. */
    - reg = titan_readl(CPTC1R);
    - reg &= ~(0x11000 << slice_eth);
    - reg |= 0x100 << slice_eth;
    - titan_writel(reg, CPTC1R);
    -
    - /* Take the MAC out of reset, reset the DLLs. */
    - reg = titan_readl(CPRR);
    - reg &= ~(0x00030000 << (slice_eth * 2));
    - reg |= 0x3 << (slice_eth * 2);
    - titan_writel(reg, CPRR);
    -
    - return platform_device_register(&rm9k_ge_pdev);
    -}
    -
    -device_initcall(rm9k_ge_devinit);
    -#endif /* defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE) */
    -
    -
    -
    -static int __init excite_setup_devs(void)
    -{
    - int res;
    - u32 reg;
    -
    - /* Enable xdma and fifo interrupts */
    - reg = titan_readl(0x0050);
    - titan_writel(reg | 0x18000000, 0x0050);
    -
    - res = request_resource(&iomem_resource, &excite_titan_resource);
    - if (res)
    - return res;
    - res = request_resource(&iomem_resource, &excite_scram_resource);
    - if (res)
    - return res;
    - res = request_resource(&iomem_resource, &excite_fpga_resource);
    - if (res)
    - return res;
    - res = request_resource(&iomem_resource, &excite_nand_resource);
    - if (res)
    - return res;
    - excite_fpga_resource.flags = excite_fpga_resource.parent->flags &
    - ( IORESOURCE_IO | IORESOURCE_MEM
    - | IORESOURCE_IRQ | IORESOURCE_DMA);
    - excite_nand_resource.flags = excite_nand_resource.parent->flags &
    - ( IORESOURCE_IO | IORESOURCE_MEM
    - | IORESOURCE_IRQ | IORESOURCE_DMA);
    -
    - return 0;
    -}
    -
    -arch_initcall(excite_setup_devs);
    -
    Index: linux-queue/arch/mips/basler/excite/excite_iodev.c
    ===================================================================
    --- linux-queue.orig/arch/mips/basler/excite/excite_iodev.c
    +++ /dev/null
    @@ -1,178 +0,0 @@
    -/*
    - * Copyright (C) 2005 by Basler Vision Technologies AG
    - * Author: Thomas Koeller <thomas.koeller@baslerweb.com>
    - *
    - * This program is free software; you can redistribute it and/or modify
    - * it under the terms of the GNU General Public License as published by
    - * the Free Software Foundation; either version 2 of the License, or
    - * (at your option) any later version.
    - *
    - * This program is distributed in the hope that it will be useful,
    - * but WITHOUT ANY WARRANTY; without even the implied warranty of
    - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
    - * GNU General Public License for more details.
    - *
    - * You should have received a copy of the GNU General Public License
    - * along with this program; if not, write to the Free Software
    - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
    - */
    -
    -#include <linux/compiler.h>
    -#include <linux/init.h>
    -#include <linux/module.h>
    -#include <linux/sched.h>
    -#include <linux/wait.h>
    -#include <linux/poll.h>
    -#include <linux/interrupt.h>
    -#include <linux/platform_device.h>
    -#include <linux/miscdevice.h>
    -#include <linux/smp_lock.h>
    -
    -#include "excite_iodev.h"
    -
    -
    -
    -static const struct resource *iodev_get_resource(struct platform_device *, const char *, unsigned int);
    -static int __init iodev_probe(struct platform_device *);
    -static int __devexit iodev_remove(struct platform_device *);
    -static int iodev_open(struct inode *, struct file *);
    -static int iodev_release(struct inode *, struct file *);
    -static ssize_t iodev_read(struct file *, char __user *, size_t s, loff_t *);
    -static unsigned int iodev_poll(struct file *, struct poll_table_struct *);
    -static irqreturn_t iodev_irqhdl(int, void *);
    -
    -
    -
    -static const char iodev_name[] = "iodev";
    -static unsigned int iodev_irq;
    -static DECLARE_WAIT_QUEUE_HEAD(wq);
    -
    -
    -
    -static const struct file_operations fops =
    -{
    - .owner = THIS_MODULE,
    - .open = iodev_open,
    - .release = iodev_release,
    - .read = iodev_read,
    - .poll = iodev_poll
    -};
    -
    -static struct miscdevice miscdev =
    -{
    - .minor = MISC_DYNAMIC_MINOR,
    - .name = iodev_name,
    - .fops = &fops
    -};
    -
    -static struct platform_driver iodev_driver = {
    - .driver = {
    - .name = iodev_name,
    - .owner = THIS_MODULE,
    - },
    - .probe = iodev_probe,
    - .remove = __devexit_p(iodev_remove),
    -};
    -
    -
    -
    -static const struct resource *
    -iodev_get_resource(struct platform_device *pdv, const char *name,
    - unsigned int type)
    -{
    - char buf[80];
    - if (snprintf(buf, sizeof buf, "%s_0", name) >= sizeof buf)
    - return NULL;
    - return platform_get_resource_byname(pdv, type, buf);
    -}
    -
    -
    -
    -/* No hotplugging on the platform bus - use __init */
    -static int __init iodev_probe(struct platform_device *dev)
    -{
    - const struct resource * const ri =
    - iodev_get_resource(dev, IODEV_RESOURCE_IRQ, IORESOURCE_IRQ);
    -
    - if (unlikely(!ri))
    - return -ENXIO;
    -
    - iodev_irq = ri->start;
    - return misc_register(&miscdev);
    -}
    -
    -
    -
    -static int __devexit iodev_remove(struct platform_device *dev)
    -{
    - return misc_deregister(&miscdev);
    -}
    -
    -static int iodev_open(struct inode *i, struct file *f)
    -{
    - int ret;
    -
    - ret = request_irq(iodev_irq, iodev_irqhdl, IRQF_DISABLED,
    - iodev_name, &miscdev);
    -
    - return ret;
    -}
    -
    -static int iodev_release(struct inode *i, struct file *f)
    -{
    - free_irq(iodev_irq, &miscdev);
    - return 0;
    -}
    -
    -
    -
    -
    -static ssize_t
    -iodev_read(struct file *f, char __user *d, size_t s, loff_t *o)
    -{
    - ssize_t ret;
    - DEFINE_WAIT(w);
    -
    - prepare_to_wait(&wq, &w, TASK_INTERRUPTIBLE);
    - if (!signal_pending(current))
    - schedule();
    - ret = signal_pending(current) ? -ERESTARTSYS : 0;
    - finish_wait(&wq, &w);
    - return ret;
    -}
    -
    -
    -static unsigned int iodev_poll(struct file *f, struct poll_table_struct *p)
    -{
    - poll_wait(f, &wq, p);
    - return POLLOUT | POLLWRNORM;
    -}
    -
    -static irqreturn_t iodev_irqhdl(int irq, void *ctxt)
    -{
    - wake_up(&wq);
    -
    - return IRQ_HANDLED;
    -}
    -
    -static int __init iodev_init_module(void)
    -{
    - return platform_driver_register(&iodev_driver);
    -}
    -
    -
    -
    -static void __exit iodev_cleanup_module(void)
    -{
    - platform_driver_unregister(&iodev_driver);
    -}
    -
    -module_init(iodev_init_module);
    -module_exit(iodev_cleanup_module);
    -
    -
    -
    -MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>");
    -MODULE_DESCRIPTION("Basler eXcite i/o interrupt handler");
    -MODULE_VERSION("0.0");
    -MODULE_LICENSE("GPL");
    Index: linux-queue/arch/mips/basler/excite/excite_iodev.h
    ===================================================================
    --- linux-queue.orig/arch/mips/basler/excite/excite_iodev.h
    +++ /dev/null
    @@ -1,10 +0,0 @@
    -#ifndef __EXCITE_IODEV_H__
    -#define __EXCITE_IODEV_H__
    -
    -/* Device name */
    -#define IODEV_NAME "iodev"
    -
    -/* Resource names */
    -#define IODEV_RESOURCE_IRQ "excite_iodev_irq"
    -
    -#endif /* __EXCITE_IODEV_H__ */
    Index: linux-queue/arch/mips/basler/excite/excite_irq.c
    ===================================================================
    --- linux-queue.orig/arch/mips/basler/excite/excite_irq.c
    +++ /dev/null
    @@ -1,122 +0,0 @@
    -/*
    - * Copyright (C) by Basler Vision Technologies AG
    - * Author: Thomas Koeller <thomas.koeller@baslereb.com>
    - *
    - * This program is free software; you can redistribute it and/or modify
    - * it under the terms of the GNU General Public License as published by
    - * the Free Software Foundation; either version 2 of the License, or
    - * (at your option) any later version.
    - *
    - * This program is distributed in the hope that it will be useful,
    - * but WITHOUT ANY WARRANTY; without even the implied warranty of
    - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
    - * GNU General Public License for more details.
    - *
    - * You should have received a copy of the GNU General Public License
    - * along with this program; if not, write to the Free Software
    - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
    - */
    -
    -#include <linux/errno.h>
    -#include <linux/init.h>
    -#include <linux/kernel_stat.h>
    -#include <linux/module.h>
    -#include <linux/signal.h>
    -#include <linux/sched.h>
    -#include <linux/types.h>
    -#include <linux/interrupt.h>
    -#include <linux/ioport.h>
    -#include <linux/timex.h>
    -#include <linux/slab.h>
    -#include <linux/random.h>
    -#include <linux/bitops.h>
    -#include <asm/bootinfo.h>
    -#include <asm/io.h>
    -#include <asm/irq.h>
    -#include <asm/irq_cpu.h>
    -#include <asm/mipsregs.h>
    -#include <asm/system.h>
    -#include <asm/rm9k-ocd.h>
    -
    -#include <excite.h>
    -
    -extern asmlinkage void excite_handle_int(void);
    -
    -/*
    - * Initialize the interrupt handler
    - */
    -void __init arch_init_irq(void)
    -{
    - mips_cpu_irq_init();
    - rm7k_cpu_irq_init();
    - rm9k_cpu_irq_init();
    -}
    -
    -asmlinkage void plat_irq_dispatch(void)
    -{
    - const u32
    - interrupts = read_c0_cause() >> 8,
    - mask = ((read_c0_status() >> 8) & 0x000000ff) |
    - (read_c0_intcontrol() & 0x0000ff00),
    - pending = interrupts & mask;
    - u32 msgintflags, msgintmask, msgint;
    -
    - /* process timer interrupt */
    - if (pending & (1 << TIMER_IRQ)) {
    - do_IRQ(TIMER_IRQ);
    - return;
    - }
    -
    - /* Process PCI interrupts */
    -#if USB_IRQ < 10
    - msgintflags = ocd_readl(INTP0Status0 + (USB_MSGINT / 0x20 * 0x10));
    - msgintmask = ocd_readl(INTP0Mask0 + (USB_MSGINT / 0x20 * 0x10));
    - msgint = msgintflags & msgintmask & (0x1 << (USB_MSGINT % 0x20));
    - if ((pending & (1 << USB_IRQ)) && msgint) {
    -#else
    - if (pending & (1 << USB_IRQ)) {
    -#endif
    - do_IRQ(USB_IRQ);
    - return;
    - }
    -
    - /* Process TITAN interrupts */
    - msgintflags = ocd_readl(INTP0Status0 + (TITAN_MSGINT / 0x20 * 0x10));
    - msgintmask = ocd_readl(INTP0Mask0 + (TITAN_MSGINT / 0x20 * 0x10));
    - msgint = msgintflags & msgintmask & (0x1 << (TITAN_MSGINT % 0x20));
    - if ((pending & (1 << TITAN_IRQ)) && msgint) {
    - ocd_writel(msgint, INTP0Clear0 + (TITAN_MSGINT / 0x20 * 0x10));
    - do_IRQ(TITAN_IRQ);
    - return;
    - }
    -
    - /* Process FPGA line #0 interrupts */
    - msgintflags = ocd_readl(INTP0Status0 + (FPGA0_MSGINT / 0x20 * 0x10));
    - msgintmask = ocd_readl(INTP0Mask0 + (FPGA0_MSGINT / 0x20 * 0x10));
    - msgint = msgintflags & msgintmask & (0x1 << (FPGA0_MSGINT % 0x20));
    - if ((pending & (1 << FPGA0_IRQ)) && msgint) {
    - do_IRQ(FPGA0_IRQ);
    - return;
    - }
    -
    - /* Process FPGA line #1 interrupts */
    - msgintflags = ocd_readl(INTP0Status0 + (FPGA1_MSGINT / 0x20 * 0x10));
    - msgintmask = ocd_readl(INTP0Mask0 + (FPGA1_MSGINT / 0x20 * 0x10));
    - msgint = msgintflags & msgintmask & (0x1 << (FPGA1_MSGINT % 0x20));
    - if ((pending & (1 << FPGA1_IRQ)) && msgint) {
    - do_IRQ(FPGA1_IRQ);
    - return;
    - }
    -
    - /* Process PHY interrupts */
    - msgintflags = ocd_readl(INTP0Status0 + (PHY_MSGINT / 0x20 * 0x10));
    - msgintmask = ocd_readl(INTP0Mask0 + (PHY_MSGINT / 0x20 * 0x10));
    - msgint = msgintflags & msgintmask & (0x1 << (PHY_MSGINT % 0x20));
    - if ((pending & (1 << PHY_IRQ)) && msgint) {
    - do_IRQ(PHY_IRQ);
    - return;
    - }
    -
    - /* Process spurious interrupts */
    - spurious_interrupt();
    -}
    Index: linux-queue/arch/mips/basler/excite/excite_procfs.c
    ===================================================================
    --- linux-queue.orig/arch/mips/basler/excite/excite_procfs.c
    +++ /dev/null
    @@ -1,92 +0,0 @@
    -/*
    - * Copyright (C) 2004, 2005 by Basler Vision Technologies AG
    - * Author: Thomas Koeller <thomas.koeller@baslerweb.com>
    - *
    - * Procfs support for Basler eXcite
    - *
    - * This program is free software; you can redistribute it and/or modify
    - * it under the terms of the GNU General Public License as published by
    - * the Free Software Foundation; either version 2 of the License, or
    - * (at your option) any later version.
    - *
    - * This program is distributed in the hope that it will be useful,
    - * but WITHOUT ANY WARRANTY; without even the implied warranty of
    - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
    - * GNU General Public License for more details.
    - *
    - * You should have received a copy of the GNU General Public License
    - * along with this program; if not, write to the Free Software
    - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
    - */
    -#include <linux/module.h>
    -#include <linux/proc_fs.h>
    -#include <linux/seq_file.h>
    -#include <linux/stat.h>
    -#include <asm/page.h>
    -#include <asm/io.h>
    -#include <asm/system.h>
    -#include <asm/rm9k-ocd.h>
    -
    -#include <excite.h>
    -
    -static int excite_unit_id_proc_show(struct seq_file *m, void *v)
    -{
    - seq_printf(m, "%06x", unit_id);
    - return 0;
    -}
    -
    -static int excite_unit_id_proc_open(struct inode *inode, struct file *file)
    -{
    - return single_open(file, excite_unit_id_proc_show, NULL);
    -}
    -
    -static const struct file_operations excite_unit_id_proc_fops = {
    - .owner = THIS_MODULE,
    - .open = excite_unit_id_proc_open,
    - .read = seq_read,
    - .llseek = seq_lseek,
    - .release = single_release,
    -};
    -
    -static int
    -excite_bootrom_read(char *page, char **start, off_t off, int count,
    - int *eof, void *data)
    -{
    - void __iomem * src;
    -
    - if (off >= EXCITE_SIZE_BOOTROM) {
    - *eof = 1;
    - return 0;
    - }
    -
    - if ((off + count) > EXCITE_SIZE_BOOTROM)
    - count = EXCITE_SIZE_BOOTROM - off;
    -
    - src = ioremap(EXCITE_PHYS_BOOTROM + off, count);
    - if (src) {
    - memcpy_fromio(page, src, count);
    - iounmap(src);
    - *start = page;
    - } else {
    - count = -ENOMEM;
    - }
    -
    - return count;
    -}
    -
    -void excite_procfs_init(void)
    -{
    - /* Create & populate /proc/excite */
    - struct proc_dir_entry * const pdir = proc_mkdir("excite", NULL);
    - if (pdir) {
    - struct proc_dir_entry * e;
    -
    - e = proc_create("unit_id", S_IRUGO, pdir,
    - &excite_unit_id_proc_fops);
    - if (e) e->size = 6;
    -
    - e = create_proc_read_entry("bootrom", S_IRUGO, pdir,
    - excite_bootrom_read, NULL);
    - if (e) e->size = EXCITE_SIZE_BOOTROM;
    - }
    -}
    Index: linux-queue/arch/mips/basler/excite/excite_prom.c
    ===================================================================
    --- linux-queue.orig/arch/mips/basler/excite/excite_prom.c
    +++ /dev/null
    @@ -1,144 +0,0 @@
    -/*
    - * Copyright (C) 2004, 2005 by Thomas Koeller (thomas.koeller@baslerweb.com)
    - * Based on the PMC-Sierra Yosemite board support by Ralf Baechle and
    - * Manish Lachwani.
    - *
    - * This program is free software; you can redistribute it and/or modify
    - * it under the terms of the GNU General Public License as published by
    - * the Free Software Foundation; either version 2 of the License, or
    - * (at your option) any later version.
    - *
    - * This program is distributed in the hope that it will be useful,
    - * but WITHOUT ANY WARRANTY; without even the implied warranty of
    - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
    - * GNU General Public License for more details.
    - *
    - * You should have received a copy of the GNU General Public License
    - * along with this program; if not, write to the Free Software
    - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
    - */
    -
    -#include <linux/init.h>
    -#include <linux/sched.h>
    -#include <linux/mm.h>
    -#include <linux/delay.h>
    -#include <linux/smp.h>
    -#include <linux/module.h>
    -#include <asm/io.h>
    -#include <asm/pgtable.h>
    -#include <asm/processor.h>
    -#include <asm/reboot.h>
    -#include <asm/system.h>
    -#include <asm/bootinfo.h>
    -#include <asm/string.h>
    -
    -#include <excite.h>
    -
    -/* This struct is used by Redboot to pass arguments to the kernel */
    -typedef struct
    -{
    - char *name;
    - char *val;
    -} t_env_var;
    -
    -struct parmblock {
    - t_env_var memsize;
    - t_env_var modetty0;
    - t_env_var ethaddr;
    - t_env_var env_end;
    - char *argv[2];
    - char text[0];
    -};
    -
    -static unsigned int prom_argc;
    -static const char ** prom_argv;
    -static const t_env_var * prom_env;
    -
    -static void prom_halt(void) __attribute__((noreturn));
    -static void prom_exit(void) __attribute__((noreturn));
    -
    -
    -
    -const char *get_system_type(void)
    -{
    - return "Basler eXcite";
    -}
    -
    -/*
    - * Halt the system
    - */
    -static void prom_halt(void)
    -{
    - printk(KERN_NOTICE "\n** System halted.\n");
    - while (1)
    - asm volatile (
    - "\t.set\tmips3\n"
    - "\twait\n"
    - "\t.set\tmips0\n"
    - );
    -}
    -
    -/*
    - * Reset the CPU and re-enter Redboot
    - */
    -static void prom_exit(void)
    -{
    - unsigned int i;
    - volatile unsigned char * const flg =
    - (volatile unsigned char *) (EXCITE_ADDR_FPGA + EXCITE_FPGA_DPR);
    -
    - /* Clear the watchdog reset flag, set the reboot flag */
    - *flg &= ~0x01;
    - *flg |= 0x80;
    -
    - for (i = 0; i < 10; i++) {
    - *(volatile unsigned char *) (EXCITE_ADDR_FPGA + EXCITE_FPGA_SYSCTL) = 0x02;
    - iob();
    - mdelay(1000);
    - }
    -
    - printk(KERN_NOTICE "Reset failed\n");
    - prom_halt();
    -}
    -
    -static const char __init *prom_getenv(char *name)
    -{
    - const t_env_var * p;
    - for (p = prom_env; p->name != NULL; p++)
    - if(strcmp(name, p->name) == 0)
    - break;
    - return p->val;
    -}
    -
    -/*
    - * Init routine which accepts the variables from Redboot
    - */
    -void __init prom_init(void)
    -{
    - const struct parmblock * const pb = (struct parmblock *) fw_arg2;
    -
    - prom_argc = fw_arg0;
    - prom_argv = (const char **) fw_arg1;
    - prom_env = &pb->memsize;
    -
    - /* Callbacks for halt, restart */
    - _machine_restart = (void (*)(char *)) prom_exit;
    - _machine_halt = prom_halt;
    -
    -#ifdef CONFIG_32BIT
    - /* copy command line */
    - strcpy(arcs_cmdline, prom_argv[1]);
    - memsize = simple_strtol(prom_getenv("memsize"), NULL, 16);
    - strcpy(modetty, prom_getenv("modetty0"));
    -#endif /* CONFIG_32BIT */
    -
    -#ifdef CONFIG_64BIT
    -# error 64 bit support not implemented
    -#endif /* CONFIG_64BIT */
    -}
    -
    -/* This is called from free_initmem(), so we need to provide it */
    -void __init prom_free_prom_memory(void)
    -{
    - /* Nothing to do */
    -}
    Index: linux-queue/arch/mips/basler/excite/excite_setup.c
    ===================================================================
    --- linux-queue.orig/arch/mips/basler/excite/excite_setup.c
    +++ /dev/null
    @@ -1,302 +0,0 @@
    -/*
    - * Copyright (C) 2004, 2005 by Basler Vision Technologies AG
    - * Author: Thomas Koeller <thomas.koeller@baslerweb.com>
    - * Based on the PMC-Sierra Yosemite board support by Ralf Baechle and
    - * Manish Lachwani.
    - *
    - * This program is free software; you can redistribute it and/or modify
    - * it under the terms of the GNU General Public License as published by
    - * the Free Software Foundation; either version 2 of the License, or
    - * (at your option) any later version.
    - *
    - * This program is distributed in the hope that it will be useful,
    - * but WITHOUT ANY WARRANTY; without even the implied warranty of
    - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
    - * GNU General Public License for more details.
    - *
    - * You should have received a copy of the GNU General Public License
    - * along with this program; if not, write to the Free Software
    - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
    - */
    -
    -#include <linux/types.h>
    -#include <linux/kernel.h>
    -#include <linux/module.h>
    -#include <linux/string.h>
    -#include <linux/tty.h>
    -#include <linux/serial_core.h>
    -#include <linux/serial.h>
    -#include <linux/serial_8250.h>
    -#include <linux/ioport.h>
    -#include <linux/spinlock.h>
    -#include <asm/bootinfo.h>
    -#include <asm/mipsregs.h>
    -#include <asm/pgtable-32.h>
    -#include <asm/io.h>
    -#include <asm/time.h>
    -#include <asm/rm9k-ocd.h>
    -
    -#include <excite.h>
    -
    -#define TITAN_UART_CLK 25000000
    -
    -#if 1
    -/* normal serial port assignment */
    -#define REGBASE_SER0 0x0208
    -#define REGBASE_SER1 0x0238
    -#define MASK_SER0 0x1
    -#define MASK_SER1 0x2
    -#else
    -/* serial ports swapped */
    -#define REGBASE_SER0 0x0238
    -#define REGBASE_SER1 0x0208
    -#define MASK_SER0 0x2
    -#define MASK_SER1 0x1
    -#endif
    -
    -unsigned long memsize;
    -char modetty[30];
    -unsigned int titan_irq = TITAN_IRQ;
    -static void __iomem * ctl_regs;
    -u32 unit_id;
    -
    -volatile void __iomem * const ocd_base = (void *) (EXCITE_ADDR_OCD);
    -volatile void __iomem * const titan_base = (void *) (EXCITE_ADDR_TITAN);
    -
    -/* Protect access to shared GPI registers */
    -DEFINE_SPINLOCK(titan_lock);
    -int titan_irqflags;
    -
    -
    -/*
    - * The eXcite platform uses the alternate timer interrupt
    - *
    - * Fixme: At the time of this writing cevt-r4k.c doesn't yet know about how
    - * to handle the alternate timer interrupt of the RM9000.
    - */
    -void __init plat_time_init(void)
    -{
    - const u32 modebit5 = ocd_readl(0x00e4);
    - unsigned int mult = ((modebit5 >> 11) & 0x1f) + 2;
    - unsigned int div = ((modebit5 >> 16) & 0x1f) + 2;
    -
    - if (div == 33)
    - div = 1;
    - mips_hpt_frequency = EXCITE_CPU_EXT_CLOCK * mult / div / 2;
    -}
    -
    -static int __init excite_init_console(void)
    -{
    -#if defined(CONFIG_SERIAL_8250)
    - static __initdata char serr[] =
    - KERN_ERR "Serial port #%u setup failed\n";
    - struct uart_port up;
    -
    - /* Take the DUART out of reset */
    - titan_writel(0x00ff1cff, CPRR);
    -
    -#if (CONFIG_SERIAL_8250_NR_UARTS > 1)
    - /* Enable both ports */
    - titan_writel(MASK_SER0 | MASK_SER1, UACFG);
    -#else
    - /* Enable port #0 only */
    - titan_writel(MASK_SER0, UACFG);
    -#endif
    -
    - /*
    - * Set up serial port #0. Do not use autodetection; the result is
    - * not what we want.
    - */
    - memset(&up, 0, sizeof(up));
    - up.membase = (char *) titan_addr(REGBASE_SER0);
    - up.irq = TITAN_IRQ;
    - up.uartclk = TITAN_UART_CLK;
    - up.regshift = 0;
    - up.iotype = UPIO_RM9000;
    - up.type = PORT_RM9000;
    - up.flags = UPF_SHARE_IRQ;
    - up.line = 0;
    - if (early_serial_setup(&up))
    - printk(serr, up.line);
    -
    -#if CONFIG_SERIAL_8250_NR_UARTS > 1
    - /* And now for port #1. */
    - up.membase = (char *) titan_addr(REGBASE_SER1);
    - up.line = 1;
    - if (early_serial_setup(&up))
    - printk(serr, up.line);
    -#endif /* CONFIG_SERIAL_8250_NR_UARTS > 1 */
    -#else
    - /* Leave the DUART in reset */
    - titan_writel(0x00ff3cff, CPRR);
    -#endif /* defined(CONFIG_SERIAL_8250) */
    -
    - return 0;
    -}
    -
    -static int __init excite_platform_init(void)
    -{
    - unsigned int i;
    - unsigned char buf[3];
    - u8 reg;
    - void __iomem * dpr;
    -
    - /* BIU buffer allocations */
    - ocd_writel(8, CPURSLMT); /* CPU */
    - titan_writel(4, CPGRWL); /* GPI / Ethernet */
    -
    - /* Map control registers located in FPGA */
    - ctl_regs = ioremap_nocache(EXCITE_PHYS_FPGA + EXCITE_FPGA_SYSCTL, 16);
    - if (!ctl_regs)
    - panic("eXcite: failed to map platform control registers\n");
    - memcpy_fromio(buf, ctl_regs + 2, ARRAY_SIZE(buf));
    - unit_id = buf[0] | (buf[1] << 8) | (buf[2] << 16);
    -
    - /* Clear the reboot flag */
    - dpr = ioremap_nocache(EXCITE_PHYS_FPGA + EXCITE_FPGA_DPR, 1);
    - reg = __raw_readb(dpr);
    - __raw_writeb(reg & 0x7f, dpr);
    - iounmap(dpr);
    -
    - /* Interrupt controller setup */
    - for (i = INTP0Status0; i < INTP0Status0 + 0x80; i += 0x10) {
    - ocd_writel(0x00000000, i + 0x04);
    - ocd_writel(0xffffffff, i + 0x0c);
    - }
    - ocd_writel(0x2, NMICONFIG);
    -
    - ocd_writel(0x1 << (TITAN_MSGINT % 0x20),
    - INTP0Mask0 + (0x10 * (TITAN_MSGINT / 0x20)));
    - ocd_writel((0x1 << (FPGA0_MSGINT % 0x20))
    - | ocd_readl(INTP0Mask0 + (0x10 * (FPGA0_MSGINT / 0x20))),
    - INTP0Mask0 + (0x10 * (FPGA0_MSGINT / 0x20)));
    - ocd_writel((0x1 << (FPGA1_MSGINT % 0x20))
    - | ocd_readl(INTP0Mask0 + (0x10 * (FPGA1_MSGINT / 0x20))),
    - INTP0Mask0 + (0x10 * (FPGA1_MSGINT / 0x20)));
    - ocd_writel((0x1 << (PHY_MSGINT % 0x20))
    - | ocd_readl(INTP0Mask0 + (0x10 * (PHY_MSGINT / 0x20))),
    - INTP0Mask0 + (0x10 * (PHY_MSGINT / 0x20)));
    -#if USB_IRQ < 10
    - ocd_writel((0x1 << (USB_MSGINT % 0x20))
    - | ocd_readl(INTP0Mask0 + (0x10 * (USB_MSGINT / 0x20))),
    - INTP0Mask0 + (0x10 * (USB_MSGINT / 0x20)));
    -#endif
    - /* Enable the packet FIFO, XDMA and XDMA arbiter */
    - titan_writel(0x00ff18ff, CPRR);
    -
    - /*
    - * Set up the PADMUX. Power down all ethernet slices,
    - * they will be powered up and configured at device startup.
    - */
    - titan_writel(0x00878206, CPTC1R);
    - titan_writel(0x00001100, CPTC0R); /* latch PADMUX, enable WCIMODE */
    -
    - /* Reset and enable the FIFO block */
    - titan_writel(0x00000001, SDRXFCIE);
    - titan_writel(0x00000001, SDTXFCIE);
    - titan_writel(0x00000100, SDRXFCIE);
    - titan_writel(0x00000000, SDTXFCIE);
    -
    - /*
    - * Initialize the common interrupt shared by all components of
    - * the GPI/Ethernet subsystem.
    - */
    - titan_writel((EXCITE_PHYS_OCD >> 12), CPCFG0);
    - titan_writel(TITAN_MSGINT, CPCFG1);
    -
    - /*
    - * XDMA configuration.
    - * In order for the XDMA to be sharable among multiple drivers,
    - * the setup must be done here in the platform. The reason is that
    - * this setup can only be done while the XDMA is in reset. If this
    - * were done in a driver, it would interrupt all other drivers
    - * using the XDMA.
    - */
    - titan_writel(0x80021dff, GXCFG); /* XDMA reset */
    - titan_writel(0x00000000, CPXCISRA);
    - titan_writel(0x00000000, CPXCISRB); /* clear pending interrupts */
    -#if defined(CONFIG_HIGHMEM)
    -# error change for HIGHMEM support!
    -#else
    - titan_writel(0x00000000, GXDMADRPFX); /* buffer address prefix */
    -#endif
    - titan_writel(0, GXDMA_DESCADR);
    -
    - for (i = 0x5040; i <= 0x5300; i += 0x0040)
    - titan_writel(0x80080000, i); /* reset channel */
    -
    - titan_writel((0x1 << 29) /* no sparse tx descr. */
    - | (0x1 << 28) /* no sparse rx descr. */
    - | (0x1 << 23) | (0x1 << 24) /* descriptor coherency */
    - | (0x1 << 21) | (0x1 << 22) /* data coherency */
    - | (0x1 << 17)
    - | 0x1dff,
    - GXCFG);
    -
    -#if defined(CONFIG_SMP)
    -# error No SMP support
    -#else
    - /* All interrupts go to core #0 only. */
    - titan_writel(0x1f007fff, CPDST0A);
    - titan_writel(0x00000000, CPDST0B);
    - titan_writel(0x0000ff3f, CPDST1A);
    - titan_writel(0x00000000, CPDST1B);
    - titan_writel(0x00ffffff, CPXDSTA);
    - titan_writel(0x00000000, CPXDSTB);
    -#endif
    -
    - /* Enable DUART interrupts, disable everything else. */
    - titan_writel(0x04000000, CPGIG0ER);
    - titan_writel(0x000000c0, CPGIG1ER);
    -
    - excite_procfs_init();
    - return 0;
    -}
    -
    -void __init plat_mem_setup(void)
    -{
    - volatile u32 * const boot_ocd_base = (u32 *) 0xbf7fc000;
    -
    - /* Announce RAM to system */
    - add_memory_region(0x00000000, memsize, BOOT_MEM_RAM);
    -
    - /* Set up the peripheral address map */
    - *(boot_ocd_base + (LKB9 / sizeof(u32))) = 0;
    - *(boot_ocd_base + (LKB10 / sizeof(u32))) = 0;
    - *(boot_ocd_base + (LKB11 / sizeof(u32))) = 0;
    - *(boot_ocd_base + (LKB12 / sizeof(u32))) = 0;
    - wmb();
    - *(boot_ocd_base + (LKB0 / sizeof(u32))) = EXCITE_PHYS_OCD >> 4;
    - wmb();
    -
    - ocd_writel((EXCITE_PHYS_TITAN >> 4) | 0x1UL, LKB5);
    - ocd_writel(((EXCITE_SIZE_TITAN >> 4) & 0x7fffff00) - 0x100, LKM5);
    - ocd_writel((EXCITE_PHYS_SCRAM >> 4) | 0x1UL, LKB13);
    - ocd_writel(((EXCITE_SIZE_SCRAM >> 4) & 0xffffff00) - 0x100, LKM13);
    -
    - /* Local bus slot #0 */
    - ocd_writel(0x00040510, LDP0);
    - ocd_writel((EXCITE_PHYS_BOOTROM >> 4) | 0x1UL, LKB9);
    - ocd_writel(((EXCITE_SIZE_BOOTROM >> 4) & 0x03ffff00) - 0x100, LKM9);
    -
    - /* Local bus slot #2 */
    - ocd_writel(0x00000330, LDP2);
    - ocd_writel((EXCITE_PHYS_FPGA >> 4) | 0x1, LKB11);
    - ocd_writel(((EXCITE_SIZE_FPGA >> 4) - 0x100) & 0x03ffff00, LKM11);
    -
    - /* Local bus slot #3 */
    - ocd_writel(0x00123413, LDP3);
    - ocd_writel((EXCITE_PHYS_NAND >> 4) | 0x1, LKB12);
    - ocd_writel(((EXCITE_SIZE_NAND >> 4) - 0x100) & 0x03ffff00, LKM12);
    -}
    -
    -
    -
    -console_initcall(excite_init_console);
    -arch_initcall(excite_platform_init);
    -
    -EXPORT_SYMBOL(titan_lock);
    -EXPORT_SYMBOL(titan_irqflags);
    -EXPORT_SYMBOL(titan_irq);
    -EXPORT_SYMBOL(ocd_base);
    -EXPORT_SYMBOL(titan_base);
    Index: linux-queue/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h
    ===================================================================
    --- linux-queue.orig/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h
    +++ /dev/null
    @@ -1,48 +0,0 @@
    -/*
    - * This file is subject to the terms and conditions of the GNU General Public
    - * License. See the file "COPYING" in the main directory of this archive
    - * for more details.
    - *
    - * Copyright (C) 2004 Thomas Koeller <thomas.koeller@baslerweb.com>
    - * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
    - */
    -#ifndef __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H
    -#define __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H
    -
    -/*
    - * Basler eXcite has an RM9122 processor.
    - */
    -#define cpu_has_watch 1
    -#define cpu_has_mips16 0
    -#define cpu_has_divec 0
    -#define cpu_has_vce 0
    -#define cpu_has_cache_cdex_p 0
    -#define cpu_has_cache_cdex_s 0
    -#define cpu_has_prefetch 1
    -#define cpu_has_mcheck 0
    -#define cpu_has_ejtag 0
    -
    -#define cpu_has_llsc 1
    -#define cpu_has_vtag_icache 0
    -#define cpu_has_dc_aliases 0
    -#define cpu_has_ic_fills_f_dc 0
    -#define cpu_has_dsp 0
    -#define cpu_icache_snoops_remote_store 0
    -#define cpu_has_mipsmt 0
    -#define cpu_has_userlocal 0
    -
    -#define cpu_has_nofpuex 0
    -#define cpu_has_64bits 1
    -
    -#define cpu_has_mips32r1 0
    -#define cpu_has_mips32r2 0
    -#define cpu_has_mips64r1 0
    -#define cpu_has_mips64r2 0
    -
    -#define cpu_has_inclusive_pcaches 0
    -
    -#define cpu_dcache_line_size() 32
    -#define cpu_icache_line_size() 32
    -#define cpu_scache_line_size() 32
    -
    -#endif /* __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H */
    Index: linux-queue/arch/mips/include/asm/mach-excite/excite.h
    ===================================================================
    --- linux-queue.orig/arch/mips/include/asm/mach-excite/excite.h
    +++ /dev/null
    @@ -1,154 +0,0 @@
    -#ifndef __EXCITE_H__
    -#define __EXCITE_H__
    -
    -#include <linux/init.h>
    -#include <asm/addrspace.h>
    -#include <asm/types.h>
    -
    -#define EXCITE_CPU_EXT_CLOCK 100000000
    -
    -#if !defined(__ASSEMBLY__)
    -void __init excite_kgdb_init(void);
    -void excite_procfs_init(void);
    -extern unsigned long memsize;
    -extern char modetty[];
    -extern u32 unit_id;
    -#endif
    -
    -/* Base name for XICAP devices */
    -#define XICAP_NAME "xicap_gpi"
    -
    -/* OCD register offsets */
    -#define LKB0 0x0038
    -#define LKB5 0x0128
    -#define LKM5 0x012C
    -#define LKB7 0x0138
    -#define LKM7 0x013c
    -#define LKB8 0x0140
    -#define LKM8 0x0144
    -#define LKB9 0x0148
    -#define LKM9 0x014c
    -#define LKB10 0x0150
    -#define LKM10 0x0154
    -#define LKB11 0x0158
    -#define LKM11 0x015c
    -#define LKB12 0x0160
    -#define LKM12 0x0164
    -#define LKB13 0x0168
    -#define LKM13 0x016c
    -#define LDP0 0x0200
    -#define LDP1 0x0210
    -#define LDP2 0x0220
    -#define LDP3 0x0230
    -#define INTPIN0 0x0A40
    -#define INTPIN1 0x0A44
    -#define INTPIN2 0x0A48
    -#define INTPIN3 0x0A4C
    -#define INTPIN4 0x0A50
    -#define INTPIN5 0x0A54
    -#define INTPIN6 0x0A58
    -#define INTPIN7 0x0A5C
    -
    -
    -
    -
    -/* TITAN register offsets */
    -#define CPRR 0x0004
    -#define CPDSR 0x0008
    -#define CPTC0R 0x000c
    -#define CPTC1R 0x0010
    -#define CPCFG0 0x0020
    -#define CPCFG1 0x0024
    -#define CPDST0A 0x0028
    -#define CPDST0B 0x002c
    -#define CPDST1A 0x0030
    -#define CPDST1B 0x0034
    -#define CPXDSTA 0x0038
    -#define CPXDSTB 0x003c
    -#define CPXCISRA 0x0048
    -#define CPXCISRB 0x004c
    -#define CPGIG0ER 0x0050
    -#define CPGIG1ER 0x0054
    -#define CPGRWL 0x0068
    -#define CPURSLMT 0x00f8
    -#define UACFG 0x0200
    -#define UAINTS 0x0204
    -#define SDRXFCIE 0x4828
    -#define SDTXFCIE 0x4928
    -#define INTP0Status0 0x1B00
    -#define INTP0Mask0 0x1B04
    -#define INTP0Set0 0x1B08
    -#define INTP0Clear0 0x1B0C
    -#define GXCFG 0x5000
    -#define GXDMADRPFX 0x5018
    -#define GXDMA_DESCADR 0x501c
    -#define GXCH0TDESSTRT 0x5054
    -
    -/* IRQ definitions */
    -#define NMICONFIG 0xac0
    -#define TITAN_MSGINT 0xc4
    -#define TITAN_IRQ ((TITAN_MSGINT / 0x20) + 2)
    -#define FPGA0_MSGINT 0x5a
    -#define FPGA0_IRQ ((FPGA0_MSGINT / 0x20) + 2)
    -#define FPGA1_MSGINT 0x7b
    -#define FPGA1_IRQ ((FPGA1_MSGINT / 0x20) + 2)
    -#define PHY_MSGINT 0x9c
    -#define PHY_IRQ ((PHY_MSGINT / 0x20) + 2)
    -
    -#if defined(CONFIG_BASLER_EXCITE_PROTOTYPE)
    -/* Pre-release units used interrupt pin #9 */
    -#define USB_IRQ 11
    -#else
    -/* Re-designed units use interrupt pin #1 */
    -#define USB_MSGINT 0x39
    -#define USB_IRQ ((USB_MSGINT / 0x20) + 2)
    -#endif
    -#define TIMER_IRQ 12
    -
    -
    -/* Device address ranges */
    -#define EXCITE_OFFS_OCD 0x1fffc000
    -#define EXCITE_SIZE_OCD (16 * 1024)
    -#define EXCITE_PHYS_OCD CPHYSADDR(EXCITE_OFFS_OCD)
    -#define EXCITE_ADDR_OCD CKSEG1ADDR(EXCITE_OFFS_OCD)
    -
    -#define EXCITE_OFFS_SCRAM 0x1fffa000
    -#define EXCITE_SIZE_SCRAM (8 << 10)
    -#define EXCITE_PHYS_SCRAM CPHYSADDR(EXCITE_OFFS_SCRAM)
    -#define EXCITE_ADDR_SCRAM CKSEG1ADDR(EXCITE_OFFS_SCRAM)
    -
    -#define EXCITE_OFFS_PCI_IO 0x1fff8000
    -#define EXCITE_SIZE_PCI_IO (8 << 10)
    -#define EXCITE_PHYS_PCI_IO CPHYSADDR(EXCITE_OFFS_PCI_IO)
    -#define EXCITE_ADDR_PCI_IO CKSEG1ADDR(EXCITE_OFFS_PCI_IO)
    -
    -#define EXCITE_OFFS_TITAN 0x1fff0000
    -#define EXCITE_SIZE_TITAN (32 << 10)
    -#define EXCITE_PHYS_TITAN CPHYSADDR(EXCITE_OFFS_TITAN)
    -#define EXCITE_ADDR_TITAN CKSEG1ADDR(EXCITE_OFFS_TITAN)
    -
    -#define EXCITE_OFFS_PCI_MEM 0x1ffe0000
    -#define EXCITE_SIZE_PCI_MEM (64 << 10)
    -#define EXCITE_PHYS_PCI_MEM CPHYSADDR(EXCITE_OFFS_PCI_MEM)
    -#define EXCITE_ADDR_PCI_MEM CKSEG1ADDR(EXCITE_OFFS_PCI_MEM)
    -
    -#define EXCITE_OFFS_FPGA 0x1ffdc000
    -#define EXCITE_SIZE_FPGA (16 << 10)
    -#define EXCITE_PHYS_FPGA CPHYSADDR(EXCITE_OFFS_FPGA)
    -#define EXCITE_ADDR_FPGA CKSEG1ADDR(EXCITE_OFFS_FPGA)
    -
    -#define EXCITE_OFFS_NAND 0x1ffd8000
    -#define EXCITE_SIZE_NAND (16 << 10)
    -#define EXCITE_PHYS_NAND CPHYSADDR(EXCITE_OFFS_NAND)
    -#define EXCITE_ADDR_NAND CKSEG1ADDR(EXCITE_OFFS_NAND)
    -
    -#define EXCITE_OFFS_BOOTROM 0x1f000000
    -#define EXCITE_SIZE_BOOTROM (8 << 20)
    -#define EXCITE_PHYS_BOOTROM CPHYSADDR(EXCITE_OFFS_BOOTROM)
    -#define EXCITE_ADDR_BOOTROM CKSEG1ADDR(EXCITE_OFFS_BOOTROM)
    -
    -/* FPGA address offsets */
    -#define EXCITE_FPGA_DPR 0x0104 /* dual-ported ram */
    -#define EXCITE_FPGA_SYSCTL 0x0200 /* system control register block */
    -
    -#endif /* __EXCITE_H__ */
    Index: linux-queue/arch/mips/include/asm/mach-excite/excite_fpga.h
    ===================================================================
    --- linux-queue.orig/arch/mips/include/asm/mach-excite/excite_fpga.h
    +++ /dev/null
    @@ -1,80 +0,0 @@
    -#ifndef EXCITE_FPGA_H_INCLUDED
    -#define EXCITE_FPGA_H_INCLUDED
    -
    -
    -/**
    - * Address alignment of the individual FPGA bytes.
    - * The address arrangement of the individual bytes of the FPGA is two
    - * byte aligned at the embedded MK2 platform.
    - */
    -#ifdef EXCITE_CCI_FPGA_MK2
    -typedef unsigned char excite_cci_fpga_align_t __attribute__ ((aligned(2)));
    -#else
    -typedef unsigned char excite_cci_fpga_align_t;
    -#endif
    -
    -
    -/**
    - * Size of Dual Ported RAM.
    - */
    -#define EXCITE_DPR_SIZE 263
    -
    -
    -/**
    - * Size of Reserved Status Fields in Dual Ported RAM.
    - */
    -#define EXCITE_DPR_STATUS_SIZE 7
    -
    -
    -
    -/**
    - * FPGA.
    - * Hardware register layout of the FPGA interface. The FPGA must accessed
    - * byte wise solely.
    - * @see EXCITE_CCI_DPR_MK2
    - */
    -typedef struct excite_fpga {
    -
    - /**
    - * Dual Ported RAM.
    - */
    - excite_cci_fpga_align_t dpr[EXCITE_DPR_SIZE];
    -
    - /**
    - * Status.
    - */
    - excite_cci_fpga_align_t status[EXCITE_DPR_STATUS_SIZE];
    -
    -#ifdef EXCITE_CCI_FPGA_MK2
    - /**
    - * RM9000 Interrupt.
    - * Write access initiates interrupt at the RM9000 (MIPS) processor of the eXcite.
    - */
    - excite_cci_fpga_align_t rm9k_int;
    -#else
    - /**
    - * MK2 Interrupt.
    - * Write access initiates interrupt at the ARM processor of the MK2.
    - */
    - excite_cci_fpga_align_t mk2_int;
    -
    - excite_cci_fpga_align_t gap[0x1000-0x10f];
    -
    - /**
    - * IRQ Source/Acknowledge.
    - */
    - excite_cci_fpga_align_t rm9k_irq_src;
    -
    - /**
    - * IRQ Mask.
    - * Set bits enable the related interrupt.
    - */
    - excite_cci_fpga_align_t rm9k_irq_mask;
    -#endif
    -
    -
    -} excite_fpga;
    -
    -
    -
    -#endif /* ndef EXCITE_FPGA_H_INCLUDED */
    Index: linux-queue/arch/mips/include/asm/mach-excite/excite_nandflash.h
    ===================================================================
    --- linux-queue.orig/arch/mips/include/asm/mach-excite/excite_nandflash.h
    +++ /dev/null
    @@ -1,7 +0,0 @@
    -#ifndef __EXCITE_NANDFLASH_H__
    -#define __EXCITE_NANDFLASH_H__
    -
    -/* Resource names */
    -#define EXCITE_NANDFLASH_RESOURCE_REGS "excite_nandflash_regs"
    -
    -#endif /* __EXCITE_NANDFLASH_H__ */
    Index: linux-queue/arch/mips/include/asm/mach-excite/rm9k_eth.h
    ===================================================================
    --- linux-queue.orig/arch/mips/include/asm/mach-excite/rm9k_eth.h
    +++ /dev/null
    @@ -1,23 +0,0 @@
    -#if !defined(__RM9K_ETH_H__)
    -#define __RM9K_ETH_H__
    -
    -#define RM9K_GE_NAME "rm9k_ge"
    -
    -/* Resource names */
    -#define RM9K_GE_RESOURCE_MAC "rm9k_ge_mac"
    -#define RM9K_GE_RESOURCE_MSTAT "rm9k_ge_mstat"
    -#define RM9K_GE_RESOURCE_PKTPROC "rm9k_ge_pktproc"
    -#define RM9K_GE_RESOURCE_XDMA "rm9k_ge_xdma"
    -#define RM9K_GE_RESOURCE_FIFO_RX "rm9k_ge_fifo_rx"
    -#define RM9K_GE_RESOURCE_FIFO_TX "rm9k_ge_fifo_tx"
    -#define RM9K_GE_RESOURCE_FIFOMEM_RX "rm9k_ge_fifo_memory_rx"
    -#define RM9K_GE_RESOURCE_FIFOMEM_TX "rm9k_ge_fifo_memory_tx"
    -#define RM9K_GE_RESOURCE_PHY "rm9k_ge_phy"
    -#define RM9K_GE_RESOURCE_DMADESC_RX "rm9k_ge_dmadesc_rx"
    -#define RM9K_GE_RESOURCE_DMADESC_TX "rm9k_ge_dmadesc_tx"
    -#define RM9K_GE_RESOURCE_IRQ_MAIN "rm9k_ge_irq_main"
    -#define RM9K_GE_RESOURCE_IRQ_PHY "rm9k_ge_irq_phy"
    -#define RM9K_GE_RESOURCE_GPI_SLICE "rm9k_ge_gpi_slice"
    -#define RM9K_GE_RESOURCE_MDIO_CHANNEL "rm9k_ge_mdio_channel"
    -
    -#endif /* !defined(__RM9K_ETH_H__) */
    Index: linux-queue/arch/mips/include/asm/mach-excite/rm9k_wdt.h
    ===================================================================
    --- linux-queue.orig/arch/mips/include/asm/mach-excite/rm9k_wdt.h
    +++ /dev/null
    @@ -1,12 +0,0 @@
    -#ifndef __RM9K_WDT_H__
    -#define __RM9K_WDT_H__
    -
    -/* Device name */
    -#define WDT_NAME "wdt_gpi"
    -
    -/* Resource names */
    -#define WDT_RESOURCE_REGS "excite_watchdog_regs"
    -#define WDT_RESOURCE_IRQ "excite_watchdog_irq"
    -#define WDT_RESOURCE_COUNTER "excite_watchdog_counter"
    -
    -#endif /* __RM9K_WDT_H__ */
    Index: linux-queue/arch/mips/include/asm/mach-excite/rm9k_xicap.h
    ===================================================================
    --- linux-queue.orig/arch/mips/include/asm/mach-excite/rm9k_xicap.h
    +++ /dev/null
    @@ -1,16 +0,0 @@
    -#ifndef __EXCITE_XICAP_H__
    -#define __EXCITE_XICAP_H__
    -
    -
    -/* Resource names */
    -#define XICAP_RESOURCE_FIFO_RX "xicap_fifo_rx"
    -#define XICAP_RESOURCE_FIFO_TX "xicap_fifo_tx"
    -#define XICAP_RESOURCE_XDMA "xicap_xdma"
    -#define XICAP_RESOURCE_DMADESC "xicap_dmadesc"
    -#define XICAP_RESOURCE_PKTPROC "xicap_pktproc"
    -#define XICAP_RESOURCE_IRQ "xicap_irq"
    -#define XICAP_RESOURCE_GPI_SLICE "xicap_gpi_slice"
    -#define XICAP_RESOURCE_FIFO_BLK "xicap_fifo_blocks"
    -#define XICAP_RESOURCE_PKT_STREAM "xicap_pkt_stream"
    -
    -#endif /* __EXCITE_XICAP_H__ */
    Index: linux-queue/arch/mips/include/asm/mach-excite/war.h
    ===================================================================
    --- linux-queue.orig/arch/mips/include/asm/mach-excite/war.h
    +++ /dev/null
    @@ -1,25 +0,0 @@
    -/*
    - * This file is subject to the terms and conditions of the GNU General Public
    - * License. See the file "COPYING" in the main directory of this archive
    - * for more details.
    - *
    - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
    - */
    -#ifndef __ASM_MIPS_MACH_EXCITE_WAR_H
    -#define __ASM_MIPS_MACH_EXCITE_WAR_H
    -
    -#define R4600_V1_INDEX_ICACHEOP_WAR 0
    -#define R4600_V1_HIT_CACHEOP_WAR 0
    -#define R4600_V2_HIT_CACHEOP_WAR 0
    -#define R5432_CP0_INTERRUPT_WAR 0
    -#define BCM1250_M3_WAR 0
    -#define SIBYTE_1956_WAR 0
    -#define MIPS4K_ICACHE_REFILL_WAR 0
    -#define MIPS_CACHE_SYNC_WAR 0
    -#define TX49XX_ICACHE_INDEX_INV_WAR 0
    -#define RM9000_CDEX_SMP_WAR 1
    -#define ICACHE_REFILLS_WORKAROUND_WAR 1
    -#define R10000_LLSC_WAR 0
    -#define MIPS34K_MISSED_ITLB_WAR 0
    -
    -#endif /* __ASM_MIPS_MACH_EXCITE_WAR_H */
    Index: linux-queue/drivers/mtd/nand/Makefile
    ===================================================================
    --- linux-queue.orig/drivers/mtd/nand/Makefile
    +++ linux-queue/drivers/mtd/nand/Makefile
    @@ -27,7 +27,6 @@ obj-$(CONFIG_MTD_NAND_ATMEL) += atmel_n
    obj-$(CONFIG_MTD_NAND_GPIO) += gpio.o
    obj-$(CONFIG_MTD_NAND_OMAP2) += omap2.o
    obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o
    -obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o
    obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
    obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
    obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
    Index: linux-queue/drivers/mtd/nand/excite_nandflash.c
    ===================================================================
    --- linux-queue.orig/drivers/mtd/nand/excite_nandflash.c
    +++ /dev/null
    @@ -1,248 +0,0 @@
    -/*
    -* Copyright (C) 2005 - 2007 by Basler Vision Technologies AG
    -* Author: Thomas Koeller <thomas.koeller.qbaslerweb.com>
    -* Original code by Thies Moeller <thies.moeller@baslerweb.com>
    -*
    -* This program is free software; you can redistribute it and/or modify
    -* it under the terms of the GNU General Public License as published by
    -* the Free Software Foundation; either version 2 of the License, or
    -* (at your option) any later version.
    -*
    -* This program is distributed in the hope that it will be useful,
    -* but WITHOUT ANY WARRANTY; without even the implied warranty of
    -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
    -* GNU General Public License for more details.
    -*
    -* You should have received a copy of the GNU General Public License
    -* along with this program; if not, write to the Free Software
    -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
    -*/
    -
    -#include <linux/module.h>
    -#include <linux/types.h>
    -#include <linux/init.h>
    -#include <linux/kernel.h>
    -#include <linux/string.h>
    -#include <linux/ioport.h>
    -#include <linux/platform_device.h>
    -#include <linux/delay.h>
    -#include <linux/err.h>
    -
    -#include <linux/mtd/mtd.h>
    -#include <linux/mtd/nand.h>
    -#include <linux/mtd/nand_ecc.h>
    -#include <linux/mtd/partitions.h>
    -
    -#include <asm/io.h>
    -#include <asm/rm9k-ocd.h>
    -
    -#include <excite_nandflash.h>
    -
    -#define EXCITE_NANDFLASH_VERSION "0.1"
    -
    -/* I/O register offsets */
    -#define EXCITE_NANDFLASH_DATA_BYTE 0x00
    -#define EXCITE_NANDFLASH_STATUS_BYTE 0x0c
    -#define EXCITE_NANDFLASH_ADDR_BYTE 0x10
    -#define EXCITE_NANDFLASH_CMD_BYTE 0x14
    -
    -/* prefix for debug output */
    -static const char module_id[] = "excite_nandflash";
    -
    -/*
    - * partition definition
    - */
    -static const struct mtd_partition partition_info[] = {
    - {
    - .name = "eXcite RootFS",
    - .offset = 0,
    - .size = MTDPART_SIZ_FULL
    - }
    -};
    -
    -static inline const struct resource *
    -excite_nand_get_resource(struct platform_device *d, unsigned long flags,
    - const char *basename)
    -{
    - char buf[80];
    -
    - if (snprintf(buf, sizeof buf, "%s_%u", basename, d->id) >= sizeof buf)
    - return NULL;
    - return platform_get_resource_byname(d, flags, buf);
    -}
    -
    -static inline void __iomem *
    -excite_nand_map_regs(struct platform_device *d, const char *basename)
    -{
    - void *result = NULL;
    - const struct resource *const r =
    - excite_nand_get_resource(d, IORESOURCE_MEM, basename);
    -
    - if (r)
    - result = ioremap_nocache(r->start, r->end + 1 - r->start);
    - return result;
    -}
    -
    -/* controller and mtd information */
    -struct excite_nand_drvdata {
    - struct mtd_info board_mtd;
    - struct nand_chip board_chip;
    - void __iomem *regs;
    - void __iomem *tgt;
    -};
    -
    -/* Control function */
    -static void excite_nand_control(struct mtd_info *mtd, int cmd,
    - unsigned int ctrl)
    -{
    - struct excite_nand_drvdata * const d =
    - container_of(mtd, struct excite_nand_drvdata, board_mtd);
    -
    - switch (ctrl) {
    - case NAND_CTRL_CHANGE | NAND_CTRL_CLE:
    - d->tgt = d->regs + EXCITE_NANDFLASH_CMD_BYTE;
    - break;
    - case NAND_CTRL_CHANGE | NAND_CTRL_ALE:
    - d->tgt = d->regs + EXCITE_NANDFLASH_ADDR_BYTE;
    - break;
    - case NAND_CTRL_CHANGE | NAND_NCE:
    - d->tgt = d->regs + EXCITE_NANDFLASH_DATA_BYTE;
    - break;
    - }
    -
    - if (cmd != NAND_CMD_NONE)
    - __raw_writeb(cmd, d->tgt);
    -}
    -
    -/* Return 0 if flash is busy, 1 if ready */
    -static int excite_nand_devready(struct mtd_info *mtd)
    -{
    - struct excite_nand_drvdata * const drvdata =
    - container_of(mtd, struct excite_nand_drvdata, board_mtd);
    -
    - return __raw_readb(drvdata->regs + EXCITE_NANDFLASH_STATUS_BYTE);
    -}
    -
    -/*
    - * Called by device layer to remove the driver.
    - * The binding to the mtd and all allocated
    - * resources are released.
    - */
    -static int __exit excite_nand_remove(struct platform_device *dev)
    -{
    - struct excite_nand_drvdata * const this = platform_get_drvdata(dev);
    -
    - platform_set_drvdata(dev, NULL);
    -
    - if (unlikely(!this)) {
    - printk(KERN_ERR "%s: called %s without private data!!",
    - module_id, __func__);
    - return -EINVAL;
    - }
    -
    - /* first thing we need to do is release our mtd
    - * then go through freeing the resource used
    - */
    - nand_release(&this->board_mtd);
    -
    - /* free the common resources */
    - iounmap(this->regs);
    - kfree(this);
    -
    - DEBUG(MTD_DEBUG_LEVEL1, "%s: removed\n", module_id);
    - return 0;
    -}
    -
    -/*
    - * Called by device layer when it finds a device matching
    - * one our driver can handle. This code checks to see if
    - * it can allocate all necessary resources then calls the
    - * nand layer to look for devices.
    -*/
    -static int __init excite_nand_probe(struct platform_device *pdev)
    -{
    - struct excite_nand_drvdata *drvdata; /* private driver data */
    - struct nand_chip *board_chip; /* private flash chip data */
    - struct mtd_info *board_mtd; /* mtd info for this board */
    - int scan_res;
    -
    - drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
    - if (unlikely(!drvdata)) {
    - printk(KERN_ERR "%s: no memory for drvdata\n",
    - module_id);
    - return -ENOMEM;
    - }
    -
    - /* bind private data into driver */
    - platform_set_drvdata(pdev, drvdata);
    -
    - /* allocate and map the resource */
    - drvdata->regs =
    - excite_nand_map_regs(pdev, EXCITE_NANDFLASH_RESOURCE_REGS);
    -
    - if (unlikely(!drvdata->regs)) {
    - printk(KERN_ERR "%s: cannot reserve register region\n",
    - module_id);
    - kfree(drvdata);
    - return -ENXIO;
    - }
    -
    - drvdata->tgt = drvdata->regs + EXCITE_NANDFLASH_DATA_BYTE;
    -
    - /* initialise our chip */
    - board_chip = &drvdata->board_chip;
    - board_chip->IO_ADDR_R = board_chip->IO_ADDR_W =
    - drvdata->regs + EXCITE_NANDFLASH_DATA_BYTE;
    - board_chip->cmd_ctrl = excite_nand_control;
    - board_chip->dev_ready = excite_nand_devready;
    - board_chip->chip_delay = 25;
    - board_chip->ecc.mode = NAND_ECC_SOFT;
    -
    - /* link chip to mtd */
    - board_mtd = &drvdata->board_mtd;
    - board_mtd->priv = board_chip;
    -
    - DEBUG(MTD_DEBUG_LEVEL2, "%s: device scan\n", module_id);
    - scan_res = nand_scan(&drvdata->board_mtd, 1);
    -
    - if (likely(!scan_res)) {
    - DEBUG(MTD_DEBUG_LEVEL2, "%s: register partitions\n", module_id);
    - add_mtd_partitions(&drvdata->board_mtd, partition_info,
    - ARRAY_SIZE(partition_info));
    - } else {
    - iounmap(drvdata->regs);
    - kfree(drvdata);
    - printk(KERN_ERR "%s: device scan failed\n", module_id);
    - return -EIO;
    - }
    - return 0;
    -}
    -
    -static struct platform_driver excite_nand_driver = {
    - .driver = {
    - .name = "excite_nand",
    - .owner = THIS_MODULE,
    - },
    - .probe = excite_nand_probe,
    - .remove = __devexit_p(excite_nand_remove)
    -};
    -
    -static int __init excite_nand_init(void)
    -{
    - pr_info("Basler eXcite nand flash driver Version "
    - EXCITE_NANDFLASH_VERSION "\n");
    - return platform_driver_register(&excite_nand_driver);
    -}
    -
    -static void __exit excite_nand_exit(void)
    -{
    - platform_driver_unregister(&excite_nand_driver);
    -}
    -
    -module_init(excite_nand_init);
    -module_exit(excite_nand_exit);
    -
    -MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>");
    -MODULE_DESCRIPTION("Basler eXcite NAND-Flash driver");
    -MODULE_LICENSE("GPL");
    -MODULE_VERSION(EXCITE_NANDFLASH_VERSION)
    Index: linux-queue/drivers/mtd/nand/Kconfig
    ===================================================================
    --- linux-queue.orig/drivers/mtd/nand/Kconfig
    +++ linux-queue/drivers/mtd/nand/Kconfig
    @@ -277,14 +277,6 @@ config MTD_NAND_SHARPSL
    tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
    depends on ARCH_PXA

    -config MTD_NAND_BASLER_EXCITE
    - tristate "Support for NAND Flash on Basler eXcite"
    - depends on BASLER_EXCITE
    - help
    - This enables the driver for the NAND flash device found on the
    - Basler eXcite Smart Camera. If built as a module, the driver
    - will be named excite_nandflash.
    -
    config MTD_NAND_CAFE
    tristate "NAND support for OLPC CAFÉ chip"
    depends on PCI
    Index: linux-queue/arch/mips/configs/ar7_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/ar7_defconfig
    +++ linux-queue/arch/mips/configs/ar7_defconfig
    @@ -10,7 +10,6 @@ CONFIG_MIPS=y
    #
    # CONFIG_MACH_ALCHEMY is not set
    CONFIG_AR7=y
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_BCM47XX is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    Index: linux-queue/arch/mips/configs/bcm47xx_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/bcm47xx_defconfig
    +++ linux-queue/arch/mips/configs/bcm47xx_defconfig
    @@ -9,7 +9,6 @@ CONFIG_MIPS=y
    # Machine selection
    #
    # CONFIG_MACH_ALCHEMY is not set
    -# CONFIG_BASLER_EXCITE is not set
    CONFIG_BCM47XX=y
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    Index: linux-queue/arch/mips/configs/bcm63xx_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/bcm63xx_defconfig
    +++ linux-queue/arch/mips/configs/bcm63xx_defconfig
    @@ -9,7 +9,6 @@ CONFIG_MIPS=y
    # Machine selection
    #
    # CONFIG_MACH_ALCHEMY is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_BCM47XX is not set
    CONFIG_BCM63XX=y
    # CONFIG_MIPS_COBALT is not set
    Index: linux-queue/arch/mips/configs/bigsur_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/bigsur_defconfig
    +++ linux-queue/arch/mips/configs/bigsur_defconfig
    @@ -9,7 +9,6 @@ CONFIG_MIPS=y
    # Machine selection
    #
    # CONFIG_MACH_ALCHEMY is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_BCM47XX is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    Index: linux-queue/arch/mips/configs/capcella_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/capcella_defconfig
    +++ linux-queue/arch/mips/configs/capcella_defconfig
    @@ -9,7 +9,6 @@ CONFIG_MIPS=y
    # Machine selection
    #
    # CONFIG_MACH_ALCHEMY is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    # CONFIG_MACH_JAZZ is not set
    Index: linux-queue/arch/mips/configs/cavium-octeon_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/cavium-octeon_defconfig
    +++ linux-queue/arch/mips/configs/cavium-octeon_defconfig
    @@ -9,7 +9,6 @@ CONFIG_MIPS=y
    # Machine selection
    #
    # CONFIG_MACH_ALCHEMY is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_BCM47XX is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    Index: linux-queue/arch/mips/configs/cobalt_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/cobalt_defconfig
    +++ linux-queue/arch/mips/configs/cobalt_defconfig
    @@ -9,7 +9,6 @@ CONFIG_MIPS=y
    # Machine selection
    #
    # CONFIG_MACH_ALCHEMY is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_BCM47XX is not set
    CONFIG_MIPS_COBALT=y
    # CONFIG_MACH_DECSTATION is not set
    Index: linux-queue/arch/mips/configs/db1000_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/db1000_defconfig
    +++ linux-queue/arch/mips/configs/db1000_defconfig
    @@ -23,7 +23,6 @@ CONFIG_MIPS_DB1000=y
    # CONFIG_MIPS_DB1550 is not set
    # CONFIG_MIPS_DB1200 is not set
    # CONFIG_MIPS_MIRAGE is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    # CONFIG_MACH_JAZZ is not set
    Index: linux-queue/arch/mips/configs/db1100_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/db1100_defconfig
    +++ linux-queue/arch/mips/configs/db1100_defconfig
    @@ -23,7 +23,6 @@ CONFIG_MIPS_DB1100=y
    # CONFIG_MIPS_DB1550 is not set
    # CONFIG_MIPS_DB1200 is not set
    # CONFIG_MIPS_MIRAGE is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    # CONFIG_MACH_JAZZ is not set
    Index: linux-queue/arch/mips/configs/db1200_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/db1200_defconfig
    +++ linux-queue/arch/mips/configs/db1200_defconfig
    @@ -10,7 +10,6 @@ CONFIG_MIPS=y
    #
    CONFIG_MACH_ALCHEMY=y
    # CONFIG_AR7 is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_BCM47XX is not set
    # CONFIG_BCM63XX is not set
    # CONFIG_MIPS_COBALT is not set
    Index: linux-queue/arch/mips/configs/db1500_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/db1500_defconfig
    +++ linux-queue/arch/mips/configs/db1500_defconfig
    @@ -23,7 +23,6 @@ CONFIG_MIPS_DB1500=y
    # CONFIG_MIPS_DB1550 is not set
    # CONFIG_MIPS_DB1200 is not set
    # CONFIG_MIPS_MIRAGE is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    # CONFIG_MACH_JAZZ is not set
    Index: linux-queue/arch/mips/configs/db1550_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/db1550_defconfig
    +++ linux-queue/arch/mips/configs/db1550_defconfig
    @@ -23,7 +23,6 @@ CONFIG_MACH_ALCHEMY=y
    CONFIG_MIPS_DB1550=y
    # CONFIG_MIPS_DB1200 is not set
    # CONFIG_MIPS_MIRAGE is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    # CONFIG_MACH_JAZZ is not set
    Index: linux-queue/arch/mips/configs/decstation_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/decstation_defconfig
    +++ linux-queue/arch/mips/configs/decstation_defconfig
    @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
    # CONFIG_MIPS_DB1550 is not set
    # CONFIG_MIPS_DB1200 is not set
    # CONFIG_MIPS_MIRAGE is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_MIPS_COBALT is not set
    CONFIG_MACH_DECSTATION=y
    # CONFIG_MACH_JAZZ is not set
    Index: linux-queue/arch/mips/configs/e55_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/e55_defconfig
    +++ linux-queue/arch/mips/configs/e55_defconfig
    @@ -9,7 +9,6 @@ CONFIG_MIPS=y
    # Machine selection
    #
    # CONFIG_MACH_ALCHEMY is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    # CONFIG_MACH_JAZZ is not set
    Index: linux-queue/arch/mips/configs/excite_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/excite_defconfig
    +++ /dev/null
    @@ -1,1335 +0,0 @@
    -#
    -# Automatically generated make config: don't edit
    -# Linux kernel version: 2.6.20
    -# Tue Feb 20 21:47:31 2007
    -#
    -CONFIG_MIPS=y
    -
    -#
    -# Machine selection
    -#
    -CONFIG_ZONE_DMA=y
    -# CONFIG_MIPS_MTX1 is not set
    -# CONFIG_MIPS_BOSPORUS is not set
    -# CONFIG_MIPS_PB1000 is not set
    -# CONFIG_MIPS_PB1100 is not set
    -# CONFIG_MIPS_PB1500 is not set
    -# CONFIG_MIPS_PB1550 is not set
    -# CONFIG_MIPS_PB1200 is not set
    -# CONFIG_MIPS_DB1000 is not set
    -# CONFIG_MIPS_DB1100 is not set
    -# CONFIG_MIPS_DB1500 is not set
    -# CONFIG_MIPS_DB1550 is not set
    -# CONFIG_MIPS_DB1200 is not set
    -# CONFIG_MIPS_MIRAGE is not set
    -CONFIG_BASLER_EXCITE=y
    -# CONFIG_BASLER_EXCITE_PROTOTYPE is not set
    -# CONFIG_MIPS_COBALT is not set
    -# CONFIG_MACH_DECSTATION is not set
    -# CONFIG_MACH_JAZZ is not set
    -# CONFIG_MIPS_MALTA is not set
    -# CONFIG_WR_PPMC is not set
    -# CONFIG_MIPS_SIM is not set
    -# CONFIG_MOMENCO_JAGUAR_ATX is not set
    -# CONFIG_MIPS_XXS1500 is not set
    -# CONFIG_PNX8550_JBS is not set
    -# CONFIG_PNX8550_STB810 is not set
    -# CONFIG_MACH_VR41XX is not set
    -# CONFIG_PMC_YOSEMITE is not set
    -# CONFIG_MARKEINS is not set
    -# CONFIG_SGI_IP22 is not set
    -# CONFIG_SGI_IP27 is not set
    -# CONFIG_SGI_IP32 is not set
    -# CONFIG_SIBYTE_BIGSUR is not set
    -# CONFIG_SIBYTE_SWARM is not set
    -# CONFIG_SIBYTE_SENTOSA is not set
    -# CONFIG_SIBYTE_RHONE is not set
    -# CONFIG_SIBYTE_CARMEL is not set
    -# CONFIG_SIBYTE_LITTLESUR is not set
    -# CONFIG_SIBYTE_CRHINE is not set
    -# CONFIG_SIBYTE_CRHONE is not set
    -# CONFIG_SNI_RM is not set
    -# CONFIG_TOSHIBA_JMR3927 is not set
    -# CONFIG_TOSHIBA_RBTX4927 is not set
    -# CONFIG_TOSHIBA_RBTX4938 is not set
    -CONFIG_RWSEM_GENERIC_SPINLOCK=y
    -# CONFIG_ARCH_HAS_ILOG2_U32 is not set
    -# CONFIG_ARCH_HAS_ILOG2_U64 is not set
    -CONFIG_GENERIC_FIND_NEXT_BIT=y
    -CONFIG_GENERIC_HWEIGHT=y
    -CONFIG_GENERIC_CALIBRATE_DELAY=y
    -CONFIG_GENERIC_TIME=y
    -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
    -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
    -CONFIG_DMA_COHERENT=y
    -CONFIG_CPU_BIG_ENDIAN=y
    -# CONFIG_CPU_LITTLE_ENDIAN is not set
    -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
    -CONFIG_IRQ_CPU=y
    -CONFIG_IRQ_CPU_RM7K=y
    -CONFIG_IRQ_CPU_RM9K=y
    -CONFIG_MIPS_RM9122=y
    -CONFIG_SERIAL_RM9000=y
    -CONFIG_GPI_RM9000=y
    -CONFIG_WDT_RM9000=y
    -CONFIG_MIPS_L1_CACHE_SHIFT=5
    -
    -#
    -# CPU selection
    -#
    -# CONFIG_CPU_MIPS32_R1 is not set
    -# CONFIG_CPU_MIPS32_R2 is not set
    -# CONFIG_CPU_MIPS64_R1 is not set
    -# CONFIG_CPU_MIPS64_R2 is not set
    -# CONFIG_CPU_R3000 is not set
    -# CONFIG_CPU_TX39XX is not set
    -# CONFIG_CPU_VR41XX is not set
    -# CONFIG_CPU_R4300 is not set
    -# CONFIG_CPU_R4X00 is not set
    -# CONFIG_CPU_TX49XX is not set
    -# CONFIG_CPU_R5000 is not set
    -# CONFIG_CPU_R5432 is not set
    -# CONFIG_CPU_R6000 is not set
    -# CONFIG_CPU_NEVADA is not set
    -# CONFIG_CPU_R8000 is not set
    -# CONFIG_CPU_R10000 is not set
    -# CONFIG_CPU_RM7000 is not set
    -CONFIG_CPU_RM9000=y
    -# CONFIG_CPU_SB1 is not set
    -CONFIG_SYS_HAS_CPU_RM9000=y
    -CONFIG_WEAK_ORDERING=y
    -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
    -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
    -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
    -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
    -
    -#
    -# Kernel type
    -#
    -CONFIG_32BIT=y
    -# CONFIG_64BIT is not set
    -CONFIG_PAGE_SIZE_4KB=y
    -# CONFIG_PAGE_SIZE_8KB is not set
    -# CONFIG_PAGE_SIZE_16KB is not set
    -# CONFIG_PAGE_SIZE_64KB is not set
    -CONFIG_CPU_HAS_PREFETCH=y
    -CONFIG_MIPS_MT_DISABLED=y
    -# CONFIG_MIPS_MT_SMP is not set
    -# CONFIG_MIPS_MT_SMTC is not set
    -# CONFIG_MIPS_VPE_LOADER is not set
    -# CONFIG_64BIT_PHYS_ADDR is not set
    -CONFIG_CPU_HAS_SYNC=y
    -CONFIG_GENERIC_HARDIRQS=y
    -CONFIG_GENERIC_IRQ_PROBE=y
    -CONFIG_CPU_SUPPORTS_HIGHMEM=y
    -CONFIG_ARCH_FLATMEM_ENABLE=y
    -CONFIG_SELECT_MEMORY_MODEL=y
    -CONFIG_FLATMEM_MANUAL=y
    -# CONFIG_DISCONTIGMEM_MANUAL is not set
    -# CONFIG_SPARSEMEM_MANUAL is not set
    -CONFIG_FLATMEM=y
    -CONFIG_FLAT_NODE_MEM_MAP=y
    -# CONFIG_SPARSEMEM_STATIC is not set
    -CONFIG_SPLIT_PTLOCK_CPUS=4
    -# CONFIG_RESOURCES_64BIT is not set
    -CONFIG_ZONE_DMA_FLAG=1
    -# CONFIG_HZ_48 is not set
    -# CONFIG_HZ_100 is not set
    -# CONFIG_HZ_128 is not set
    -# CONFIG_HZ_250 is not set
    -# CONFIG_HZ_256 is not set
    -CONFIG_HZ_1000=y
    -# CONFIG_HZ_1024 is not set
    -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
    -CONFIG_HZ=1000
    -# CONFIG_PREEMPT_NONE is not set
    -# CONFIG_PREEMPT_VOLUNTARY is not set
    -CONFIG_PREEMPT=y
    -CONFIG_PREEMPT_BKL=y
    -# CONFIG_KEXEC is not set
    -CONFIG_LOCKDEP_SUPPORT=y
    -CONFIG_STACKTRACE_SUPPORT=y
    -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
    -
    -#
    -# Code maturity level options
    -#
    -CONFIG_EXPERIMENTAL=y
    -CONFIG_BROKEN_ON_SMP=y
    -CONFIG_LOCK_KERNEL=y
    -CONFIG_INIT_ENV_ARG_LIMIT=32
    -
    -#
    -# General setup
    -#
    -CONFIG_LOCALVERSION=""
    -# CONFIG_LOCALVERSION_AUTO is not set
    -CONFIG_SWAP=y
    -CONFIG_SYSVIPC=y
    -# CONFIG_IPC_NS is not set
    -CONFIG_SYSVIPC_SYSCTL=y
    -CONFIG_POSIX_MQUEUE=y
    -# CONFIG_BSD_PROCESS_ACCT is not set
    -# CONFIG_TASKSTATS is not set
    -# CONFIG_UTS_NS is not set
    -# CONFIG_AUDIT is not set
    -# CONFIG_IKCONFIG is not set
    -CONFIG_SYSFS_DEPRECATED=y
    -# CONFIG_RELAY is not set
    -CONFIG_CC_OPTIMIZE_FOR_SIZE=y
    -CONFIG_SYSCTL=y
    -CONFIG_EMBEDDED=y
    -CONFIG_SYSCTL_SYSCALL=y
    -CONFIG_KALLSYMS=y
    -# CONFIG_KALLSYMS_EXTRA_PASS is not set
    -CONFIG_HOTPLUG=y
    -CONFIG_PRINTK=y
    -CONFIG_BUG=y
    -CONFIG_ELF_CORE=y
    -CONFIG_BASE_FULL=y
    -CONFIG_FUTEX=y
    -CONFIG_EPOLL=y
    -CONFIG_SHMEM=y
    -CONFIG_SLAB=y
    -CONFIG_VM_EVENT_COUNTERS=y
    -CONFIG_RT_MUTEXES=y
    -# CONFIG_TINY_SHMEM is not set
    -CONFIG_BASE_SMALL=0
    -# CONFIG_SLOB is not set
    -
    -#
    -# Loadable module support
    -#
    -CONFIG_MODULES=y
    -CONFIG_MODULE_UNLOAD=y
    -# CONFIG_MODULE_FORCE_UNLOAD is not set
    -# CONFIG_MODVERSIONS is not set
    -# CONFIG_MODULE_SRCVERSION_ALL is not set
    -CONFIG_KMOD=y
    -
    -#
    -# Block layer
    -#
    -CONFIG_BLOCK=y
    -# CONFIG_LBD is not set
    -# CONFIG_BLK_DEV_IO_TRACE is not set
    -# CONFIG_LSF is not set
    -
    -#
    -# IO Schedulers
    -#
    -CONFIG_IOSCHED_NOOP=y
    -CONFIG_IOSCHED_AS=y
    -CONFIG_IOSCHED_DEADLINE=y
    -CONFIG_IOSCHED_CFQ=y
    -CONFIG_DEFAULT_AS=y
    -# CONFIG_DEFAULT_DEADLINE is not set
    -# CONFIG_DEFAULT_CFQ is not set
    -# CONFIG_DEFAULT_NOOP is not set
    -CONFIG_DEFAULT_IOSCHED="anticipatory"
    -
    -#
    -# Bus options (PCI, PCMCIA, EISA, ISA, TC)
    -#
    -CONFIG_HW_HAS_PCI=y
    -CONFIG_PCI=y
    -CONFIG_MMU=y
    -
    -#
    -# PCCARD (PCMCIA/CardBus) support
    -#
    -# CONFIG_PCCARD is not set
    -
    -#
    -# PCI Hotplug Support
    -#
    -# CONFIG_HOTPLUG_PCI is not set
    -
    -#
    -# Executable file formats
    -#
    -CONFIG_BINFMT_ELF=y
    -# CONFIG_BINFMT_MISC is not set
    -CONFIG_TRAD_SIGNALS=y
    -
    -#
    -# Power management options
    -#
    -CONFIG_PM=y
    -# CONFIG_PM_LEGACY is not set
    -# CONFIG_PM_DEBUG is not set
    -# CONFIG_PM_SYSFS_DEPRECATED is not set
    -
    -#
    -# Networking
    -#
    -CONFIG_NET=y
    -
    -#
    -# Networking options
    -#
    -# CONFIG_NETDEBUG is not set
    -CONFIG_PACKET=y
    -CONFIG_PACKET_MMAP=y
    -CONFIG_UNIX=y
    -CONFIG_XFRM=y
    -# CONFIG_XFRM_USER is not set
    -# CONFIG_XFRM_SUB_POLICY is not set
    -CONFIG_XFRM_MIGRATE=y
    -# CONFIG_NET_KEY is not set
    -CONFIG_INET=y
    -# CONFIG_IP_MULTICAST is not set
    -# CONFIG_IP_ADVANCED_ROUTER is not set
    -CONFIG_IP_FIB_HASH=y
    -CONFIG_IP_PNP=y
    -CONFIG_IP_PNP_DHCP=y
    -# CONFIG_IP_PNP_BOOTP is not set
    -# CONFIG_IP_PNP_RARP is not set
    -# CONFIG_NET_IPIP is not set
    -# CONFIG_NET_IPGRE is not set
    -# CONFIG_ARPD is not set
    -# CONFIG_SYN_COOKIES is not set
    -# CONFIG_INET_AH is not set
    -# CONFIG_INET_ESP is not set
    -# CONFIG_INET_IPCOMP is not set
    -# CONFIG_INET_XFRM_TUNNEL is not set
    -# CONFIG_INET_TUNNEL is not set
    -CONFIG_INET_XFRM_MODE_TRANSPORT=m
    -CONFIG_INET_XFRM_MODE_TUNNEL=m
    -CONFIG_INET_XFRM_MODE_BEET=m
    -CONFIG_INET_DIAG=y
    -CONFIG_INET_TCP_DIAG=y
    -# CONFIG_TCP_CONG_ADVANCED is not set
    -CONFIG_TCP_CONG_CUBIC=y
    -CONFIG_DEFAULT_TCP_CONG="cubic"
    -CONFIG_TCP_MD5SIG=y
    -# CONFIG_IPV6 is not set
    -# CONFIG_INET6_XFRM_TUNNEL is not set
    -# CONFIG_INET6_TUNNEL is not set
    -CONFIG_NETWORK_SECMARK=y
    -# CONFIG_NETFILTER is not set
    -
    -#
    -# DCCP Configuration (EXPERIMENTAL)
    -#
    -# CONFIG_IP_DCCP is not set
    -
    -#
    -# SCTP Configuration (EXPERIMENTAL)
    -#
    -# CONFIG_IP_SCTP is not set
    -
    -#
    -# TIPC Configuration (EXPERIMENTAL)
    -#
    -# CONFIG_TIPC is not set
    -# CONFIG_ATM is not set
    -# CONFIG_BRIDGE is not set
    -# CONFIG_VLAN_8021Q is not set
    -# CONFIG_DECNET is not set
    -# CONFIG_LLC2 is not set
    -# CONFIG_IPX is not set
    -# CONFIG_ATALK is not set
    -# CONFIG_X25 is not set
    -# CONFIG_LAPB is not set
    -# CONFIG_ECONET is not set
    -# CONFIG_WAN_ROUTER is not set
    -
    -#
    -# QoS and/or fair queueing
    -#
    -# CONFIG_NET_SCHED is not set
    -
    -#
    -# Network testing
    -#
    -# CONFIG_NET_PKTGEN is not set
    -# CONFIG_HAMRADIO is not set
    -# CONFIG_IRDA is not set
    -# CONFIG_BT is not set
    -# CONFIG_IEEE80211 is not set
    -
    -#
    -# Device Drivers
    -#
    -
    -#
    -# Generic Driver Options
    -#
    -CONFIG_STANDALONE=y
    -CONFIG_PREVENT_FIRMWARE_BUILD=y
    -CONFIG_FW_LOADER=m
    -# CONFIG_SYS_HYPERVISOR is not set
    -
    -#
    -# Connector - unified userspace <-> kernelspace linker
    -#
    -# CONFIG_CONNECTOR is not set
    -
    -#
    -# Memory Technology Devices (MTD)
    -#
    -CONFIG_MTD=y
    -# CONFIG_MTD_DEBUG is not set
    -# CONFIG_MTD_CONCAT is not set
    -CONFIG_MTD_PARTITIONS=y
    -# CONFIG_MTD_REDBOOT_PARTS is not set
    -# CONFIG_MTD_CMDLINE_PARTS is not set
    -
    -#
    -# User Modules And Translation Layers
    -#
    -CONFIG_MTD_CHAR=y
    -CONFIG_MTD_BLKDEVS=y
    -CONFIG_MTD_BLOCK=y
    -# CONFIG_FTL is not set
    -# CONFIG_NFTL is not set
    -# CONFIG_INFTL is not set
    -# CONFIG_RFD_FTL is not set
    -# CONFIG_SSFDC is not set
    -
    -#
    -# RAM/ROM/Flash chip drivers
    -#
    -# CONFIG_MTD_CFI is not set
    -# CONFIG_MTD_JEDECPROBE is not set
    -CONFIG_MTD_MAP_BANK_WIDTH_1=y
    -CONFIG_MTD_MAP_BANK_WIDTH_2=y
    -CONFIG_MTD_MAP_BANK_WIDTH_4=y
    -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
    -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
    -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
    -CONFIG_MTD_CFI_I1=y
    -CONFIG_MTD_CFI_I2=y
    -# CONFIG_MTD_CFI_I4 is not set
    -# CONFIG_MTD_CFI_I8 is not set
    -# CONFIG_MTD_RAM is not set
    -# CONFIG_MTD_ROM is not set
    -# CONFIG_MTD_ABSENT is not set
    -# CONFIG_MTD_OBSOLETE_CHIPS is not set
    -
    -#
    -# Mapping drivers for chip access
    -#
    -# CONFIG_MTD_COMPLEX_MAPPINGS is not set
    -# CONFIG_MTD_PLATRAM is not set
    -
    -#
    -# Self-contained MTD device drivers
    -#
    -# CONFIG_MTD_PMC551 is not set
    -# CONFIG_MTD_SLRAM is not set
    -# CONFIG_MTD_PHRAM is not set
    -# CONFIG_MTD_MTDRAM is not set
    -# CONFIG_MTD_BLOCK2MTD is not set
    -
    -#
    -# Disk-On-Chip Device Drivers
    -#
    -# CONFIG_MTD_DOC2000 is not set
    -# CONFIG_MTD_DOC2001 is not set
    -# CONFIG_MTD_DOC2001PLUS is not set
    -
    -#
    -# NAND Flash Device Drivers
    -#
    -CONFIG_MTD_NAND=y
    -CONFIG_MTD_NAND_VERIFY_WRITE=y
    -# CONFIG_MTD_NAND_ECC_SMC is not set
    -CONFIG_MTD_NAND_IDS=y
    -# CONFIG_MTD_NAND_DISKONCHIP is not set
    -# CONFIG_MTD_NAND_BASLER_EXCITE is not set
    -# CONFIG_MTD_NAND_CAFE is not set
    -# CONFIG_MTD_NAND_NANDSIM is not set
    -
    -#
    -# OneNAND Flash Device Drivers
    -#
    -# CONFIG_MTD_ONENAND is not set
    -
    -#
    -# Parallel port support
    -#
    -# CONFIG_PARPORT is not set
    -
    -#
    -# Plug and Play support
    -#
    -# CONFIG_PNPACPI is not set
    -
    -#
    -# Block devices
    -#
    -# CONFIG_BLK_CPQ_DA is not set
    -# CONFIG_BLK_CPQ_CISS_DA is not set
    -# CONFIG_BLK_DEV_DAC960 is not set
    -# CONFIG_BLK_DEV_UMEM is not set
    -# CONFIG_BLK_DEV_COW_COMMON is not set
    -CONFIG_BLK_DEV_LOOP=m
    -# CONFIG_BLK_DEV_CRYPTOLOOP is not set
    -# CONFIG_BLK_DEV_NBD is not set
    -# CONFIG_BLK_DEV_SX8 is not set
    -# CONFIG_BLK_DEV_UB is not set
    -# CONFIG_BLK_DEV_RAM is not set
    -# CONFIG_BLK_DEV_INITRD is not set
    -# CONFIG_CDROM_PKTCDVD is not set
    -# CONFIG_ATA_OVER_ETH is not set
    -
    -#
    -# Misc devices
    -#
    -CONFIG_SGI_IOC4=m
    -# CONFIG_TIFM_CORE is not set
    -
    -#
    -# ATA/ATAPI/MFM/RLL support
    -#
    -# CONFIG_IDE is not set
    -
    -#
    -# SCSI device support
    -#
    -# CONFIG_RAID_ATTRS is not set
    -CONFIG_SCSI=y
    -CONFIG_SCSI_TGT=m
    -# CONFIG_SCSI_NETLINK is not set
    -# CONFIG_SCSI_PROC_FS is not set
    -
    -#
    -# SCSI support type (disk, tape, CD-ROM)
    -#
    -CONFIG_BLK_DEV_SD=y
    -# CONFIG_CHR_DEV_ST is not set
    -# CONFIG_CHR_DEV_OSST is not set
    -# CONFIG_BLK_DEV_SR is not set
    -# CONFIG_CHR_DEV_SG is not set
    -# CONFIG_CHR_DEV_SCH is not set
    -
    -#
    -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
    -#
    -# CONFIG_SCSI_MULTI_LUN is not set
    -# CONFIG_SCSI_CONSTANTS is not set
    -# CONFIG_SCSI_LOGGING is not set
    -CONFIG_SCSI_SCAN_ASYNC=y
    -
    -#
    -# SCSI Transports
    -#
    -# CONFIG_SCSI_SPI_ATTRS is not set
    -# CONFIG_SCSI_FC_ATTRS is not set
    -# CONFIG_SCSI_ISCSI_ATTRS is not set
    -CONFIG_SCSI_SAS_ATTRS=m
    -CONFIG_SCSI_SAS_LIBSAS=m
    -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
    -
    -#
    -# SCSI low-level drivers
    -#
    -# CONFIG_ISCSI_TCP is not set
    -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
    -# CONFIG_SCSI_3W_9XXX is not set
    -# CONFIG_SCSI_ACARD is not set
    -# CONFIG_SCSI_AACRAID is not set
    -# CONFIG_SCSI_AIC7XXX is not set
    -# CONFIG_SCSI_AIC7XXX_OLD is not set
    -# CONFIG_SCSI_AIC79XX is not set
    -CONFIG_SCSI_AIC94XX=m
    -# CONFIG_AIC94XX_DEBUG is not set
    -# CONFIG_SCSI_DPT_I2O is not set
    -# CONFIG_SCSI_ARCMSR is not set
    -# CONFIG_MEGARAID_NEWGEN is not set
    -# CONFIG_MEGARAID_LEGACY is not set
    -# CONFIG_MEGARAID_SAS is not set
    -# CONFIG_SCSI_HPTIOP is not set
    -# CONFIG_SCSI_DMX3191D is not set
    -# CONFIG_SCSI_FUTURE_DOMAIN is not set
    -# CONFIG_SCSI_IPS is not set
    -# CONFIG_SCSI_INITIO is not set
    -# CONFIG_SCSI_INIA100 is not set
    -# CONFIG_SCSI_STEX is not set
    -# CONFIG_SCSI_SYM53C8XX_2 is not set
    -# CONFIG_SCSI_QLOGIC_1280 is not set
    -# CONFIG_SCSI_QLA_FC is not set
    -# CONFIG_SCSI_QLA_ISCSI is not set
    -# CONFIG_SCSI_LPFC is not set
    -# CONFIG_SCSI_DC395x is not set
    -# CONFIG_SCSI_DC390T is not set
    -# CONFIG_SCSI_NSP32 is not set
    -# CONFIG_SCSI_DEBUG is not set
    -# CONFIG_SCSI_SRP is not set
    -
    -#
    -# Serial ATA (prod) and Parallel ATA (experimental) drivers
    -#
    -# CONFIG_ATA is not set
    -
    -#
    -# Multi-device support (RAID and LVM)
    -#
    -# CONFIG_MD is not set
    -
    -#
    -# Fusion MPT device support
    -#
    -# CONFIG_FUSION is not set
    -# CONFIG_FUSION_SPI is not set
    -# CONFIG_FUSION_FC is not set
    -# CONFIG_FUSION_SAS is not set
    -
    -#
    -# IEEE 1394 (FireWire) support
    -#
    -# CONFIG_IEEE1394 is not set
    -
    -#
    -# I2O device support
    -#
    -# CONFIG_I2O is not set
    -
    -#
    -# Network device support
    -#
    -CONFIG_NETDEVICES=y
    -# CONFIG_DUMMY is not set
    -# CONFIG_BONDING is not set
    -# CONFIG_EQUALIZER is not set
    -# CONFIG_TUN is not set
    -
    -#
    -# ARCnet devices
    -#
    -# CONFIG_ARCNET is not set
    -
    -#
    -# PHY device support
    -#
    -
    -#
    -# Ethernet (10 or 100Mbit)
    -#
    -# CONFIG_NET_ETHERNET is not set
    -
    -#
    -# Ethernet (1000 Mbit)
    -#
    -# CONFIG_ACENIC is not set
    -# CONFIG_DL2K is not set
    -# CONFIG_E1000 is not set
    -# CONFIG_NS83820 is not set
    -# CONFIG_HAMACHI is not set
    -# CONFIG_YELLOWFIN is not set
    -# CONFIG_R8169 is not set
    -# CONFIG_SIS190 is not set
    -# CONFIG_SKGE is not set
    -# CONFIG_SKY2 is not set
    -# CONFIG_SK98LIN is not set
    -# CONFIG_TIGON3 is not set
    -# CONFIG_BNX2 is not set
    -CONFIG_QLA3XXX=m
    -# CONFIG_ATL1 is not set
    -
    -#
    -# Ethernet (10000 Mbit)
    -#
    -# CONFIG_CHELSIO_T1 is not set
    -CONFIG_CHELSIO_T3=m
    -# CONFIG_IXGB is not set
    -# CONFIG_S2IO is not set
    -# CONFIG_MYRI10GE is not set
    -CONFIG_NETXEN_NIC=m
    -
    -#
    -# Token Ring devices
    -#
    -# CONFIG_TR is not set
    -
    -#
    -# Wireless LAN (non-hamradio)
    -#
    -# CONFIG_NET_RADIO is not set
    -
    -#
    -# Wan interfaces
    -#
    -# CONFIG_WAN is not set
    -# CONFIG_FDDI is not set
    -# CONFIG_HIPPI is not set
    -# CONFIG_PPP is not set
    -# CONFIG_SLIP is not set
    -# CONFIG_NET_FC is not set
    -# CONFIG_SHAPER is not set
    -# CONFIG_NETCONSOLE is not set
    -# CONFIG_NETPOLL is not set
    -# CONFIG_NET_POLL_CONTROLLER is not set
    -
    -#
    -# ISDN subsystem
    -#
    -# CONFIG_ISDN is not set
    -
    -#
    -# Telephony Support
    -#
    -# CONFIG_PHONE is not set
    -
    -#
    -# Input device support
    -#
    -CONFIG_INPUT=y
    -# CONFIG_INPUT_FF_MEMLESS is not set
    -
    -#
    -# Userland interfaces
    -#
    -CONFIG_INPUT_MOUSEDEV=m
    -CONFIG_INPUT_MOUSEDEV_PSAUX=y
    -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
    -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
    -# CONFIG_INPUT_JOYDEV is not set
    -# CONFIG_INPUT_TSDEV is not set
    -CONFIG_INPUT_EVDEV=m
    -# CONFIG_INPUT_EVBUG is not set
    -
    -#
    -# Input Device Drivers
    -#
    -# CONFIG_INPUT_KEYBOARD is not set
    -# CONFIG_INPUT_MOUSE is not set
    -# CONFIG_INPUT_JOYSTICK is not set
    -# CONFIG_INPUT_TOUCHSCREEN is not set
    -# CONFIG_INPUT_MISC is not set
    -
    -#
    -# Hardware I/O ports
    -#
    -# CONFIG_SERIO is not set
    -# CONFIG_GAMEPORT is not set
    -
    -#
    -# Character devices
    -#
    -CONFIG_VT=y
    -CONFIG_VT_CONSOLE=y
    -CONFIG_HW_CONSOLE=y
    -CONFIG_VT_HW_CONSOLE_BINDING=y
    -# CONFIG_SERIAL_NONSTANDARD is not set
    -
    -#
    -# Serial drivers
    -#
    -CONFIG_SERIAL_8250=y
    -CONFIG_SERIAL_8250_CONSOLE=y
    -CONFIG_SERIAL_8250_PCI=y
    -CONFIG_SERIAL_8250_NR_UARTS=2
    -CONFIG_SERIAL_8250_RUNTIME_UARTS=2
    -CONFIG_SERIAL_8250_EXTENDED=y
    -# CONFIG_SERIAL_8250_MANY_PORTS is not set
    -CONFIG_SERIAL_8250_SHARE_IRQ=y
    -# CONFIG_SERIAL_8250_DETECT_IRQ is not set
    -# CONFIG_SERIAL_8250_RSA is not set
    -
    -#
    -# Non-8250 serial port support
    -#
    -CONFIG_SERIAL_CORE=y
    -CONFIG_SERIAL_CORE_CONSOLE=y
    -# CONFIG_SERIAL_JSM is not set
    -CONFIG_UNIX98_PTYS=y
    -# CONFIG_LEGACY_PTYS is not set
    -
    -#
    -# IPMI
    -#
    -# CONFIG_IPMI_HANDLER is not set
    -
    -#
    -# Watchdog Cards
    -#
    -CONFIG_WATCHDOG=y
    -# CONFIG_WATCHDOG_NOWAYOUT is not set
    -
    -#
    -# Watchdog Device Drivers
    -#
    -# CONFIG_SOFT_WATCHDOG is not set
    -CONFIG_WDT_RM9K_GPI=m
    -
    -#
    -# PCI-based Watchdog Cards
    -#
    -# CONFIG_PCIPCWATCHDOG is not set
    -# CONFIG_WDTPCI is not set
    -
    -#
    -# USB-based Watchdog Cards
    -#
    -# CONFIG_USBPCWATCHDOG is not set
    -# CONFIG_HW_RANDOM is not set
    -# CONFIG_RTC is not set
    -# CONFIG_GEN_RTC is not set
    -# CONFIG_DTLK is not set
    -# CONFIG_R3964 is not set
    -# CONFIG_APPLICOM is not set
    -# CONFIG_DRM is not set
    -# CONFIG_RAW_DRIVER is not set
    -
    -#
    -# TPM devices
    -#
    -# CONFIG_TCG_TPM is not set
    -
    -#
    -# I2C support
    -#
    -# CONFIG_I2C is not set
    -
    -#
    -# SPI support
    -#
    -# CONFIG_SPI is not set
    -# CONFIG_SPI_MASTER is not set
    -
    -#
    -# Dallas's 1-wire bus
    -#
    -# CONFIG_W1 is not set
    -
    -#
    -# Hardware Monitoring support
    -#
    -# CONFIG_HWMON is not set
    -# CONFIG_HWMON_VID is not set
    -
    -#
    -# Multimedia devices
    -#
    -# CONFIG_VIDEO_DEV is not set
    -
    -#
    -# Digital Video Broadcasting Devices
    -#
    -# CONFIG_DVB is not set
    -# CONFIG_USB_DABUSB is not set
    -
    -#
    -# Graphics support
    -#
    -# CONFIG_FIRMWARE_EDID is not set
    -CONFIG_FB=y
    -# CONFIG_FB_CFB_FILLRECT is not set
    -# CONFIG_FB_CFB_COPYAREA is not set
    -# CONFIG_FB_CFB_IMAGEBLIT is not set
    -# CONFIG_FB_SVGALIB is not set
    -# CONFIG_FB_MACMODES is not set
    -# CONFIG_FB_BACKLIGHT is not set
    -# CONFIG_FB_MODE_HELPERS is not set
    -# CONFIG_FB_TILEBLITTING is not set
    -# CONFIG_FB_CIRRUS is not set
    -# CONFIG_FB_PM2 is not set
    -# CONFIG_FB_CYBER2000 is not set
    -# CONFIG_FB_ASILIANT is not set
    -# CONFIG_FB_IMSTT is not set
    -# CONFIG_FB_S1D13XXX is not set
    -# CONFIG_FB_NVIDIA is not set
    -# CONFIG_FB_RIVA is not set
    -# CONFIG_FB_MATROX is not set
    -# CONFIG_FB_RADEON is not set
    -# CONFIG_FB_ATY128 is not set
    -# CONFIG_FB_ATY is not set
    -# CONFIG_FB_S3 is not set
    -# CONFIG_FB_SAVAGE is not set
    -# CONFIG_FB_SIS is not set
    -# CONFIG_FB_NEOMAGIC is not set
    -# CONFIG_FB_KYRO is not set
    -# CONFIG_FB_3DFX is not set
    -# CONFIG_FB_VOODOO1 is not set
    -# CONFIG_FB_SMIVGX is not set
    -# CONFIG_FB_TRIDENT is not set
    -# CONFIG_FB_VIRTUAL is not set
    -
    -#
    -# Console display driver support
    -#
    -# CONFIG_VGA_CONSOLE is not set
    -CONFIG_DUMMY_CONSOLE=y
    -CONFIG_FRAMEBUFFER_CONSOLE=m
    -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
    -# CONFIG_FONTS is not set
    -CONFIG_FONT_8x8=y
    -CONFIG_FONT_8x16=y
    -
    -#
    -# Logo configuration
    -#
    -# CONFIG_LOGO is not set
    -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
    -
    -#
    -# Sound
    -#
    -# CONFIG_SOUND is not set
    -
    -#
    -# HID Devices
    -#
    -CONFIG_HID=y
    -# CONFIG_HID_DEBUG is not set
    -
    -#
    -# USB support
    -#
    -CONFIG_USB_ARCH_HAS_HCD=y
    -CONFIG_USB_ARCH_HAS_OHCI=y
    -CONFIG_USB_ARCH_HAS_EHCI=y
    -CONFIG_USB=y
    -# CONFIG_USB_DEBUG is not set
    -
    -#
    -# Miscellaneous USB options
    -#
    -CONFIG_USB_DEVICEFS=y
    -# CONFIG_USB_DYNAMIC_MINORS is not set
    -# CONFIG_USB_SUSPEND is not set
    -# CONFIG_USB_OTG is not set
    -
    -#
    -# USB Host Controller Drivers
    -#
    -CONFIG_USB_EHCI_HCD=y
    -# CONFIG_USB_EHCI_SPLIT_ISO is not set
    -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
    -# CONFIG_USB_EHCI_TT_NEWSCHED is not set
    -# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
    -# CONFIG_USB_ISP116X_HCD is not set
    -CONFIG_USB_OHCI_HCD=y
    -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
    -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
    -CONFIG_USB_OHCI_LITTLE_ENDIAN=y
    -# CONFIG_USB_UHCI_HCD is not set
    -# CONFIG_USB_SL811_HCD is not set
    -
    -#
    -# USB Device Class drivers
    -#
    -# CONFIG_USB_ACM is not set
    -# CONFIG_USB_PRINTER is not set
    -
    -#
    -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
    -#
    -
    -#
    -# may also be needed; see USB_STORAGE Help for more information
    -#
    -CONFIG_USB_STORAGE=y
    -# CONFIG_USB_STORAGE_DEBUG is not set
    -# CONFIG_USB_STORAGE_DATAFAB is not set
    -# CONFIG_USB_STORAGE_FREECOM is not set
    -# CONFIG_USB_STORAGE_DPCM is not set
    -# CONFIG_USB_STORAGE_USBAT is not set
    -# CONFIG_USB_STORAGE_SDDR09 is not set
    -# CONFIG_USB_STORAGE_SDDR55 is not set
    -# CONFIG_USB_STORAGE_JUMPSHOT is not set
    -# CONFIG_USB_STORAGE_ALAUDA is not set
    -# CONFIG_USB_STORAGE_KARMA is not set
    -# CONFIG_USB_LIBUSUAL is not set
    -
    -#
    -# USB Input Devices
    -#
    -CONFIG_USB_HID=m
    -# CONFIG_USB_HIDINPUT_POWERBOOK is not set
    -# CONFIG_HID_FF is not set
    -# CONFIG_USB_HIDDEV is not set
    -
    -#
    -# USB HID Boot Protocol drivers
    -#
    -# CONFIG_USB_KBD is not set
    -# CONFIG_USB_MOUSE is not set
    -# CONFIG_USB_AIPTEK is not set
    -# CONFIG_USB_WACOM is not set
    -# CONFIG_USB_ACECAD is not set
    -# CONFIG_USB_KBTAB is not set
    -# CONFIG_USB_POWERMATE is not set
    -# CONFIG_USB_TOUCHSCREEN is not set
    -# CONFIG_USB_YEALINK is not set
    -# CONFIG_USB_XPAD is not set
    -# CONFIG_USB_ATI_REMOTE is not set
    -# CONFIG_USB_ATI_REMOTE2 is not set
    -# CONFIG_USB_KEYSPAN_REMOTE is not set
    -# CONFIG_USB_APPLETOUCH is not set
    -# CONFIG_USB_GTCO is not set
    -
    -#
    -# USB Imaging devices
    -#
    -# CONFIG_USB_MDC800 is not set
    -# CONFIG_USB_MICROTEK is not set
    -
    -#
    -# USB Network Adapters
    -#
    -# CONFIG_USB_CATC is not set
    -# CONFIG_USB_KAWETH is not set
    -# CONFIG_USB_PEGASUS is not set
    -# CONFIG_USB_RTL8150 is not set
    -# CONFIG_USB_USBNET_MII is not set
    -# CONFIG_USB_USBNET is not set
    -# CONFIG_USB_MON is not set
    -
    -#
    -# USB port drivers
    -#
    -
    -#
    -# USB Serial Converter support
    -#
    -# CONFIG_USB_SERIAL is not set
    -
    -#
    -# USB Miscellaneous drivers
    -#
    -# CONFIG_USB_EMI62 is not set
    -# CONFIG_USB_EMI26 is not set
    -# CONFIG_USB_ADUTUX is not set
    -# CONFIG_USB_AUERSWALD is not set
    -# CONFIG_USB_RIO500 is not set
    -# CONFIG_USB_LEGOTOWER is not set
    -# CONFIG_USB_LCD is not set
    -# CONFIG_USB_BERRY_CHARGE is not set
    -# CONFIG_USB_LED is not set
    -# CONFIG_USB_CYPRESS_CY7C63 is not set
    -# CONFIG_USB_CYTHERM is not set
    -# CONFIG_USB_PHIDGET is not set
    -# CONFIG_USB_IDMOUSE is not set
    -# CONFIG_USB_FTDI_ELAN is not set
    -# CONFIG_USB_APPLEDISPLAY is not set
    -# CONFIG_USB_SISUSBVGA is not set
    -# CONFIG_USB_LD is not set
    -# CONFIG_USB_TRANCEVIBRATOR is not set
    -# CONFIG_USB_TEST is not set
    -
    -#
    -# USB DSL modem support
    -#
    -
    -#
    -# USB Gadget Support
    -#
    -# CONFIG_USB_GADGET is not set
    -
    -#
    -# MMC/SD Card support
    -#
    -# CONFIG_MMC is not set
    -
    -#
    -# LED devices
    -#
    -# CONFIG_NEW_LEDS is not set
    -
    -#
    -# LED drivers
    -#
    -
    -#
    -# LED Triggers
    -#
    -
    -#
    -# InfiniBand support
    -#
    -# CONFIG_INFINIBAND is not set
    -
    -#
    -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
    -#
    -
    -#
    -# Real Time Clock
    -#
    -# CONFIG_RTC_CLASS is not set
    -
    -#
    -# DMA Engine support
    -#
    -# CONFIG_DMA_ENGINE is not set
    -
    -#
    -# DMA Clients
    -#
    -
    -#
    -# DMA Devices
    -#
    -
    -#
    -# Auxiliary Display support
    -#
    -
    -#
    -# Virtualization
    -#
    -
    -#
    -# File systems
    -#
    -CONFIG_EXT2_FS=y
    -# CONFIG_EXT2_FS_XATTR is not set
    -# CONFIG_EXT2_FS_XIP is not set
    -# CONFIG_EXT3_FS is not set
    -# CONFIG_EXT4DEV_FS is not set
    -# CONFIG_REISERFS_FS is not set
    -# CONFIG_JFS_FS is not set
    -CONFIG_FS_POSIX_ACL=y
    -# CONFIG_XFS_FS is not set
    -# CONFIG_GFS2_FS is not set
    -# CONFIG_OCFS2_FS is not set
    -# CONFIG_MINIX_FS is not set
    -# CONFIG_ROMFS_FS is not set
    -CONFIG_INOTIFY=y
    -CONFIG_INOTIFY_USER=y
    -# CONFIG_QUOTA is not set
    -# CONFIG_DNOTIFY is not set
    -# CONFIG_AUTOFS_FS is not set
    -# CONFIG_AUTOFS4_FS is not set
    -# CONFIG_FUSE_FS is not set
    -CONFIG_GENERIC_ACL=y
    -
    -#
    -# CD-ROM/DVD Filesystems
    -#
    -# CONFIG_ISO9660_FS is not set
    -# CONFIG_UDF_FS is not set
    -
    -#
    -# DOS/FAT/NT Filesystems
    -#
    -CONFIG_FAT_FS=m
    -CONFIG_MSDOS_FS=m
    -CONFIG_VFAT_FS=m
    -CONFIG_FAT_DEFAULT_CODEPAGE=437
    -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
    -# CONFIG_NTFS_FS is not set
    -
    -#
    -# Pseudo filesystems
    -#
    -CONFIG_PROC_FS=y
    -CONFIG_PROC_KCORE=y
    -CONFIG_PROC_SYSCTL=y
    -CONFIG_SYSFS=y
    -CONFIG_TMPFS=y
    -CONFIG_TMPFS_POSIX_ACL=y
    -# CONFIG_HUGETLB_PAGE is not set
    -CONFIG_RAMFS=y
    -CONFIG_CONFIGFS_FS=m
    -
    -#
    -# Miscellaneous filesystems
    -#
    -# CONFIG_ADFS_FS is not set
    -# CONFIG_AFFS_FS is not set
    -# CONFIG_HFS_FS is not set
    -# CONFIG_HFSPLUS_FS is not set
    -# CONFIG_BEFS_FS is not set
    -# CONFIG_BFS_FS is not set
    -# CONFIG_EFS_FS is not set
    -CONFIG_JFFS2_FS=y
    -CONFIG_JFFS2_FS_DEBUG=0
    -CONFIG_JFFS2_FS_WRITEBUFFER=y
    -# CONFIG_JFFS2_SUMMARY is not set
    -# CONFIG_JFFS2_FS_XATTR is not set
    -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
    -CONFIG_JFFS2_ZLIB=y
    -CONFIG_JFFS2_RTIME=y
    -# CONFIG_JFFS2_RUBIN is not set
    -# CONFIG_CRAMFS is not set
    -# CONFIG_VXFS_FS is not set
    -# CONFIG_HPFS_FS is not set
    -# CONFIG_QNX4FS_FS is not set
    -# CONFIG_SYSV_FS is not set
    -# CONFIG_UFS_FS is not set
    -
    -#
    -# Network File Systems
    -#
    -CONFIG_NFS_FS=y
    -CONFIG_NFS_V3=y
    -# CONFIG_NFS_V3_ACL is not set
    -# CONFIG_NFS_V4 is not set
    -# CONFIG_NFS_DIRECTIO is not set
    -# CONFIG_NFSD is not set
    -CONFIG_ROOT_NFS=y
    -CONFIG_LOCKD=y
    -CONFIG_LOCKD_V4=y
    -CONFIG_NFS_COMMON=y
    -CONFIG_SUNRPC=y
    -# CONFIG_RPCSEC_GSS_KRB5 is not set
    -# CONFIG_RPCSEC_GSS_SPKM3 is not set
    -# CONFIG_SMB_FS is not set
    -# CONFIG_CIFS is not set
    -# CONFIG_NCP_FS is not set
    -# CONFIG_CODA_FS is not set
    -# CONFIG_AFS_FS is not set
    -# CONFIG_9P_FS is not set
    -
    -#
    -# Partition Types
    -#
    -CONFIG_PARTITION_ADVANCED=y
    -# CONFIG_ACORN_PARTITION is not set
    -# CONFIG_OSF_PARTITION is not set
    -# CONFIG_AMIGA_PARTITION is not set
    -# CONFIG_ATARI_PARTITION is not set
    -# CONFIG_MAC_PARTITION is not set
    -CONFIG_MSDOS_PARTITION=y
    -# CONFIG_BSD_DISKLABEL is not set
    -# CONFIG_MINIX_SUBPARTITION is not set
    -# CONFIG_SOLARIS_X86_PARTITION is not set
    -# CONFIG_UNIXWARE_DISKLABEL is not set
    -# CONFIG_LDM_PARTITION is not set
    -# CONFIG_SGI_PARTITION is not set
    -# CONFIG_ULTRIX_PARTITION is not set
    -# CONFIG_SUN_PARTITION is not set
    -# CONFIG_KARMA_PARTITION is not set
    -# CONFIG_EFI_PARTITION is not set
    -
    -#
    -# Native Language Support
    -#
    -CONFIG_NLS=y
    -CONFIG_NLS_DEFAULT="iso8859-1"
    -CONFIG_NLS_CODEPAGE_437=m
    -# CONFIG_NLS_CODEPAGE_737 is not set
    -# CONFIG_NLS_CODEPAGE_775 is not set
    -CONFIG_NLS_CODEPAGE_850=m
    -# CONFIG_NLS_CODEPAGE_852 is not set
    -# CONFIG_NLS_CODEPAGE_855 is not set
    -# CONFIG_NLS_CODEPAGE_857 is not set
    -# CONFIG_NLS_CODEPAGE_860 is not set
    -# CONFIG_NLS_CODEPAGE_861 is not set
    -# CONFIG_NLS_CODEPAGE_862 is not set
    -# CONFIG_NLS_CODEPAGE_863 is not set
    -# CONFIG_NLS_CODEPAGE_864 is not set
    -# CONFIG_NLS_CODEPAGE_865 is not set
    -# CONFIG_NLS_CODEPAGE_866 is not set
    -# CONFIG_NLS_CODEPAGE_869 is not set
    -# CONFIG_NLS_CODEPAGE_936 is not set
    -# CONFIG_NLS_CODEPAGE_950 is not set
    -# CONFIG_NLS_CODEPAGE_932 is not set
    -# CONFIG_NLS_CODEPAGE_949 is not set
    -# CONFIG_NLS_CODEPAGE_874 is not set
    -# CONFIG_NLS_ISO8859_8 is not set
    -# CONFIG_NLS_CODEPAGE_1250 is not set
    -# CONFIG_NLS_CODEPAGE_1251 is not set
    -# CONFIG_NLS_ASCII is not set
    -CONFIG_NLS_ISO8859_1=m
    -# CONFIG_NLS_ISO8859_2 is not set
    -# CONFIG_NLS_ISO8859_3 is not set
    -# CONFIG_NLS_ISO8859_4 is not set
    -# CONFIG_NLS_ISO8859_5 is not set
    -# CONFIG_NLS_ISO8859_6 is not set
    -# CONFIG_NLS_ISO8859_7 is not set
    -# CONFIG_NLS_ISO8859_9 is not set
    -# CONFIG_NLS_ISO8859_13 is not set
    -# CONFIG_NLS_ISO8859_14 is not set
    -# CONFIG_NLS_ISO8859_15 is not set
    -# CONFIG_NLS_KOI8_R is not set
    -# CONFIG_NLS_KOI8_U is not set
    -# CONFIG_NLS_UTF8 is not set
    -
    -#
    -# Distributed Lock Manager
    -#
    -CONFIG_DLM=m
    -CONFIG_DLM_TCP=y
    -# CONFIG_DLM_SCTP is not set
    -# CONFIG_DLM_DEBUG is not set
    -
    -#
    -# Profiling support
    -#
    -# CONFIG_PROFILING is not set
    -
    -#
    -# Kernel hacking
    -#
    -CONFIG_TRACE_IRQFLAGS_SUPPORT=y
    -# CONFIG_PRINTK_TIME is not set
    -CONFIG_ENABLE_MUST_CHECK=y
    -# CONFIG_MAGIC_SYSRQ is not set
    -# CONFIG_UNUSED_SYMBOLS is not set
    -# CONFIG_DEBUG_FS is not set
    -# CONFIG_HEADERS_CHECK is not set
    -# CONFIG_DEBUG_KERNEL is not set
    -CONFIG_LOG_BUF_SHIFT=14
    -CONFIG_CROSSCOMPILE=y
    -CONFIG_CMDLINE=""
    -
    -#
    -# Security options
    -#
    -# CONFIG_KEYS is not set
    -# CONFIG_SECURITY is not set
    -
    -#
    -# Cryptographic options
    -#
    -CONFIG_CRYPTO=y
    -CONFIG_CRYPTO_ALGAPI=y
    -CONFIG_CRYPTO_BLKCIPHER=m
    -CONFIG_CRYPTO_HASH=m
    -CONFIG_CRYPTO_MANAGER=m
    -# CONFIG_CRYPTO_HMAC is not set
    -CONFIG_CRYPTO_XCBC=m
    -# CONFIG_CRYPTO_NULL is not set
    -# CONFIG_CRYPTO_MD4 is not set
    -CONFIG_CRYPTO_MD5=y
    -# CONFIG_CRYPTO_SHA1 is not set
    -# CONFIG_CRYPTO_SHA256 is not set
    -# CONFIG_CRYPTO_SHA512 is not set
    -# CONFIG_CRYPTO_WP512 is not set
    -# CONFIG_CRYPTO_TGR192 is not set
    -CONFIG_CRYPTO_GF128MUL=m
    -CONFIG_CRYPTO_ECB=m
    -CONFIG_CRYPTO_CBC=m
    -CONFIG_CRYPTO_PCBC=m
    -CONFIG_CRYPTO_LRW=m
    -# CONFIG_CRYPTO_DES is not set
    -CONFIG_CRYPTO_FCRYPT=m
    -# CONFIG_CRYPTO_BLOWFISH is not set
    -# CONFIG_CRYPTO_TWOFISH is not set
    -# CONFIG_CRYPTO_SERPENT is not set
    -# CONFIG_CRYPTO_AES is not set
    -# CONFIG_CRYPTO_CAST5 is not set
    -# CONFIG_CRYPTO_CAST6 is not set
    -# CONFIG_CRYPTO_TEA is not set
    -# CONFIG_CRYPTO_ARC4 is not set
    -# CONFIG_CRYPTO_KHAZAD is not set
    -# CONFIG_CRYPTO_ANUBIS is not set
    -# CONFIG_CRYPTO_DEFLATE is not set
    -# CONFIG_CRYPTO_MICHAEL_MIC is not set
    -# CONFIG_CRYPTO_CRC32C is not set
    -CONFIG_CRYPTO_CAMELLIA=m
    -# CONFIG_CRYPTO_TEST is not set
    -
    -#
    -# Hardware crypto devices
    -#
    -
    -#
    -# Library routines
    -#
    -CONFIG_BITREVERSE=y
    -# CONFIG_CRC_CCITT is not set
    -# CONFIG_CRC16 is not set
    -CONFIG_CRC32=y
    -# CONFIG_LIBCRC32C is not set
    -CONFIG_ZLIB_INFLATE=y
    -CONFIG_ZLIB_DEFLATE=y
    -CONFIG_PLIST=y
    -CONFIG_HAS_IOMEM=y
    -CONFIG_HAS_IOPORT=y
    Index: linux-queue/arch/mips/configs/fuloong2e_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/fuloong2e_defconfig
    +++ linux-queue/arch/mips/configs/fuloong2e_defconfig
    @@ -10,7 +10,6 @@ CONFIG_MIPS=y
    #
    # CONFIG_MACH_ALCHEMY is not set
    # CONFIG_AR7 is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_BCM47XX is not set
    # CONFIG_BCM63XX is not set
    # CONFIG_MIPS_COBALT is not set
    Index: linux-queue/arch/mips/configs/ip22_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/ip22_defconfig
    +++ linux-queue/arch/mips/configs/ip22_defconfig
    @@ -9,7 +9,6 @@ CONFIG_MIPS=y
    # Machine selection
    #
    # CONFIG_MACH_ALCHEMY is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_BCM47XX is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    Index: linux-queue/arch/mips/configs/ip27_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/ip27_defconfig
    +++ linux-queue/arch/mips/configs/ip27_defconfig
    @@ -9,7 +9,6 @@ CONFIG_MIPS=y
    # Machine selection
    #
    # CONFIG_MACH_ALCHEMY is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    # CONFIG_MACH_JAZZ is not set
    Index: linux-queue/arch/mips/configs/ip28_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/ip28_defconfig
    +++ linux-queue/arch/mips/configs/ip28_defconfig
    @@ -9,7 +9,6 @@ CONFIG_MIPS=y
    # Machine selection
    #
    # CONFIG_MACH_ALCHEMY is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_BCM47XX is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    Index: linux-queue/arch/mips/configs/ip32_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/ip32_defconfig
    +++ linux-queue/arch/mips/configs/ip32_defconfig
    @@ -9,7 +9,6 @@ CONFIG_MIPS=y
    # Machine selection
    #
    # CONFIG_MACH_ALCHEMY is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_BCM47XX is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    Index: linux-queue/arch/mips/configs/jazz_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/jazz_defconfig
    +++ linux-queue/arch/mips/configs/jazz_defconfig
    @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
    # CONFIG_MIPS_DB1550 is not set
    # CONFIG_MIPS_DB1200 is not set
    # CONFIG_MIPS_MIRAGE is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    CONFIG_MACH_JAZZ=y
    Index: linux-queue/arch/mips/configs/jmr3927_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/jmr3927_defconfig
    +++ linux-queue/arch/mips/configs/jmr3927_defconfig
    @@ -9,7 +9,6 @@ CONFIG_MIPS=y
    # Machine selection
    #
    # CONFIG_MACH_ALCHEMY is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_BCM47XX is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    Index: linux-queue/arch/mips/configs/lasat_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/lasat_defconfig
    +++ linux-queue/arch/mips/configs/lasat_defconfig
    @@ -9,7 +9,6 @@ CONFIG_MIPS=y
    # Machine selection
    #
    # CONFIG_MACH_ALCHEMY is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    # CONFIG_MACH_JAZZ is not set
    Index: linux-queue/arch/mips/configs/lemote2f_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/lemote2f_defconfig
    +++ linux-queue/arch/mips/configs/lemote2f_defconfig
    @@ -10,7 +10,6 @@ CONFIG_MIPS=y
    #
    # CONFIG_MACH_ALCHEMY is not set
    # CONFIG_AR7 is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_BCM47XX is not set
    # CONFIG_BCM63XX is not set
    # CONFIG_MIPS_COBALT is not set
    Index: linux-queue/arch/mips/configs/malta_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/malta_defconfig
    +++ linux-queue/arch/mips/configs/malta_defconfig
    @@ -10,7 +10,6 @@ CONFIG_MIPS=y
    #
    CONFIG_ZONE_DMA=y
    # CONFIG_MACH_ALCHEMY is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_BCM47XX is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    Index: linux-queue/arch/mips/configs/markeins_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/markeins_defconfig
    +++ linux-queue/arch/mips/configs/markeins_defconfig
    @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
    # CONFIG_MIPS_DB1550 is not set
    # CONFIG_MIPS_DB1200 is not set
    # CONFIG_MIPS_MIRAGE is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    # CONFIG_MACH_JAZZ is not set
    Index: linux-queue/arch/mips/configs/mipssim_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/mipssim_defconfig
    +++ linux-queue/arch/mips/configs/mipssim_defconfig
    @@ -9,7 +9,6 @@ CONFIG_MIPS=y
    # Machine selection
    #
    # CONFIG_MACH_ALCHEMY is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_BCM47XX is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    Index: linux-queue/arch/mips/configs/mpc30x_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/mpc30x_defconfig
    +++ linux-queue/arch/mips/configs/mpc30x_defconfig
    @@ -9,7 +9,6 @@ CONFIG_MIPS=y
    # Machine selection
    #
    # CONFIG_MACH_ALCHEMY is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    # CONFIG_MACH_JAZZ is not set
    Index: linux-queue/arch/mips/configs/msp71xx_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/msp71xx_defconfig
    +++ linux-queue/arch/mips/configs/msp71xx_defconfig
    @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
    # CONFIG_MIPS_DB1550 is not set
    # CONFIG_MIPS_DB1200 is not set
    # CONFIG_MIPS_MIRAGE is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    # CONFIG_MACH_JAZZ is not set
    Index: linux-queue/arch/mips/configs/mtx1_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/mtx1_defconfig
    +++ linux-queue/arch/mips/configs/mtx1_defconfig
    @@ -9,7 +9,6 @@ CONFIG_MIPS=y
    # Machine selection
    #
    CONFIG_MACH_ALCHEMY=y
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    # CONFIG_MACH_JAZZ is not set
    Index: linux-queue/arch/mips/configs/pb1100_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/pb1100_defconfig
    +++ linux-queue/arch/mips/configs/pb1100_defconfig
    @@ -23,7 +23,6 @@ CONFIG_MIPS_PB1100=y
    # CONFIG_MIPS_DB1550 is not set
    # CONFIG_MIPS_DB1200 is not set
    # CONFIG_MIPS_MIRAGE is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    # CONFIG_MACH_JAZZ is not set
    Index: linux-queue/arch/mips/configs/pb1500_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/pb1500_defconfig
    +++ linux-queue/arch/mips/configs/pb1500_defconfig
    @@ -23,7 +23,6 @@ CONFIG_MIPS_PB1500=y
    # CONFIG_MIPS_DB1550 is not set
    # CONFIG_MIPS_DB1200 is not set
    # CONFIG_MIPS_MIRAGE is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    # CONFIG_MACH_JAZZ is not set
    Index: linux-queue/arch/mips/configs/pb1550_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/pb1550_defconfig
    +++ linux-queue/arch/mips/configs/pb1550_defconfig
    @@ -23,7 +23,6 @@ CONFIG_MIPS_PB1550=y
    # CONFIG_MIPS_DB1550 is not set
    # CONFIG_MIPS_DB1200 is not set
    # CONFIG_MIPS_MIRAGE is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    # CONFIG_MACH_JAZZ is not set
    Index: linux-queue/arch/mips/configs/pnx8335-stb225_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/pnx8335-stb225_defconfig
    +++ linux-queue/arch/mips/configs/pnx8335-stb225_defconfig
    @@ -9,7 +9,6 @@ CONFIG_MIPS=y
    # Machine selection
    #
    # CONFIG_MACH_ALCHEMY is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_BCM47XX is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    Index: linux-queue/arch/mips/configs/pnx8550-jbs_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/pnx8550-jbs_defconfig
    +++ linux-queue/arch/mips/configs/pnx8550-jbs_defconfig
    @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
    # CONFIG_MIPS_DB1550 is not set
    # CONFIG_MIPS_DB1200 is not set
    # CONFIG_MIPS_MIRAGE is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    # CONFIG_MACH_JAZZ is not set
    Index: linux-queue/arch/mips/configs/pnx8550-stb810_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/pnx8550-stb810_defconfig
    +++ linux-queue/arch/mips/configs/pnx8550-stb810_defconfig
    @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
    # CONFIG_MIPS_DB1550 is not set
    # CONFIG_MIPS_DB1200 is not set
    # CONFIG_MIPS_MIRAGE is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    # CONFIG_MACH_JAZZ is not set
    Index: linux-queue/arch/mips/configs/powertv_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/powertv_defconfig
    +++ linux-queue/arch/mips/configs/powertv_defconfig
    @@ -10,7 +10,6 @@ CONFIG_MIPS=y
    #
    # CONFIG_MACH_ALCHEMY is not set
    # CONFIG_AR7 is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_BCM47XX is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    Index: linux-queue/arch/mips/configs/rb532_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/rb532_defconfig
    +++ linux-queue/arch/mips/configs/rb532_defconfig
    @@ -9,7 +9,6 @@ CONFIG_MIPS=y
    # Machine selection
    #
    # CONFIG_MACH_ALCHEMY is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_BCM47XX is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    Index: linux-queue/arch/mips/configs/rbtx49xx_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/rbtx49xx_defconfig
    +++ linux-queue/arch/mips/configs/rbtx49xx_defconfig
    @@ -10,7 +10,6 @@ CONFIG_MIPS=y
    #
    # CONFIG_MACH_ALCHEMY is not set
    # CONFIG_AR7 is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_BCM47XX is not set
    # CONFIG_BCM63XX is not set
    # CONFIG_MIPS_COBALT is not set
    Index: linux-queue/arch/mips/configs/rm200_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/rm200_defconfig
    +++ linux-queue/arch/mips/configs/rm200_defconfig
    @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
    # CONFIG_MIPS_DB1550 is not set
    # CONFIG_MIPS_DB1200 is not set
    # CONFIG_MIPS_MIRAGE is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    # CONFIG_MACH_JAZZ is not set
    Index: linux-queue/arch/mips/configs/sb1250-swarm_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/sb1250-swarm_defconfig
    +++ linux-queue/arch/mips/configs/sb1250-swarm_defconfig
    @@ -9,7 +9,6 @@ CONFIG_MIPS=y
    # Machine selection
    #
    # CONFIG_MACH_ALCHEMY is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_BCM47XX is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    Index: linux-queue/arch/mips/configs/tb0219_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/tb0219_defconfig
    +++ linux-queue/arch/mips/configs/tb0219_defconfig
    @@ -9,7 +9,6 @@ CONFIG_MIPS=y
    # Machine selection
    #
    # CONFIG_MACH_ALCHEMY is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_BCM47XX is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    Index: linux-queue/arch/mips/configs/tb0226_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/tb0226_defconfig
    +++ linux-queue/arch/mips/configs/tb0226_defconfig
    @@ -9,7 +9,6 @@ CONFIG_MIPS=y
    # Machine selection
    #
    # CONFIG_MACH_ALCHEMY is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_BCM47XX is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    Index: linux-queue/arch/mips/configs/tb0287_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/tb0287_defconfig
    +++ linux-queue/arch/mips/configs/tb0287_defconfig
    @@ -9,7 +9,6 @@ CONFIG_MIPS=y
    # Machine selection
    #
    # CONFIG_MACH_ALCHEMY is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_BCM47XX is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    Index: linux-queue/arch/mips/configs/workpad_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/workpad_defconfig
    +++ linux-queue/arch/mips/configs/workpad_defconfig
    @@ -9,7 +9,6 @@ CONFIG_MIPS=y
    # Machine selection
    #
    # CONFIG_MACH_ALCHEMY is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    # CONFIG_MACH_JAZZ is not set
    Index: linux-queue/arch/mips/configs/wrppmc_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/wrppmc_defconfig
    +++ linux-queue/arch/mips/configs/wrppmc_defconfig
    @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
    # CONFIG_MIPS_DB1550 is not set
    # CONFIG_MIPS_DB1200 is not set
    # CONFIG_MIPS_MIRAGE is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    # CONFIG_MACH_JAZZ is not set
    Index: linux-queue/arch/mips/configs/yosemite_defconfig
    ===================================================================
    --- linux-queue.orig/arch/mips/configs/yosemite_defconfig
    +++ linux-queue/arch/mips/configs/yosemite_defconfig
    @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
    # CONFIG_MIPS_DB1550 is not set
    # CONFIG_MIPS_DB1200 is not set
    # CONFIG_MIPS_MIRAGE is not set
    -# CONFIG_BASLER_EXCITE is not set
    # CONFIG_MIPS_COBALT is not set
    # CONFIG_MACH_DECSTATION is not set
    # CONFIG_MACH_JAZZ is not set
    Index: linux-queue/arch/mips/Makefile
    ===================================================================
    --- linux-queue.orig/arch/mips/Makefile
    +++ linux-queue/arch/mips/Makefile
    @@ -369,13 +369,6 @@ cflags-$(CONFIG_PMC_YOSEMITE) += -I$(src
    load-$(CONFIG_PMC_YOSEMITE) += 0xffffffff80100000

    #
    -# Basler eXcite
    -#
    -core-$(CONFIG_BASLER_EXCITE) += arch/mips/basler/excite/
    -cflags-$(CONFIG_BASLER_EXCITE) += -I$(srctree)/arch/mips/include/asm/mach-excite
    -load-$(CONFIG_BASLER_EXCITE) += 0x80100000
    -
    -#
    # LASAT platforms
    #
    core-$(CONFIG_LASAT) += arch/mips/lasat/
    Index: linux-queue/arch/mips/pci/Makefile
    ===================================================================
    --- linux-queue.orig/arch/mips/pci/Makefile
    +++ linux-queue/arch/mips/pci/Makefile
    @@ -22,7 +22,6 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o
    #
    # These are still pretty much in the old state, watch, go blind.
    #
    -obj-$(CONFIG_BASLER_EXCITE) += ops-titan.o pci-excite.o fixup-excite.o
    obj-$(CONFIG_LASAT) += pci-lasat.o
    obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o
    obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o
    Index: linux-queue/arch/mips/pci/fixup-excite.c
    ===================================================================
    --- linux-queue.orig/arch/mips/pci/fixup-excite.c
    +++ /dev/null
    @@ -1,36 +0,0 @@
    -/*
    - * Copyright (C) 2004 by Basler Vision Technologies AG
    - * Author: Thomas Koeller <thomas.koeller@baslerweb.com>
    - *
    - * This program is free software; you can redistribute it and/or modify
    - * it under the terms of the GNU General Public License as published by
    - * the Free Software Foundation; either version 2 of the License, or
    - * (at your option) any later version.
    - *
    - * This program is distributed in the hope that it will be useful,
    - * but WITHOUT ANY WARRANTY; without even the implied warranty of
    - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
    - * GNU General Public License for more details.
    - *
    - * You should have received a copy of the GNU General Public License
    - * along with this program; if not, write to the Free Software
    - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
    - */
    -#include <linux/kernel.h>
    -#include <linux/init.h>
    -#include <linux/pci.h>
    -#include <excite.h>
    -
    -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
    -{
    - if (pin == 0)
    - return -1;
    -
    - return USB_IRQ; /* USB controller is the only PCI device */
    -}
    -
    -/* Do platform specific device initialization at pci_enable_device() time */
    -int pcibios_plat_dev_init(struct pci_dev *dev)
    -{
    - return 0;
    -}
    Index: linux-queue/drivers/watchdog/Makefile
    ===================================================================
    --- linux-queue.orig/drivers/watchdog/Makefile
    +++ linux-queue/drivers/watchdog/Makefile
    @@ -109,7 +109,6 @@ obj-$(CONFIG_RC32434_WDT) += rc32434_wdt
    obj-$(CONFIG_INDYDOG) += indydog.o
    obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
    obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
    -obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
    obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
    obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
    obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
    Index: linux-queue/drivers/watchdog/rm9k_wdt.c
    ===================================================================
    --- linux-queue.orig/drivers/watchdog/rm9k_wdt.c
    +++ /dev/null
    @@ -1,419 +0,0 @@
    -/*
    - * Watchdog implementation for GPI h/w found on PMC-Sierra RM9xxx
    - * chips.
    - *
    - * Copyright (C) 2004 by Basler Vision Technologies AG
    - * Author: Thomas Koeller <thomas.koeller@baslerweb.com>
    - *
    - * This program is free software; you can redistribute it and/or modify
    - * it under the terms of the GNU General Public License as published by
    - * the Free Software Foundation; either version 2 of the License, or
    - * (at your option) any later version.
    - *
    - * This program is distributed in the hope that it will be useful,
    - * but WITHOUT ANY WARRANTY; without even the implied warranty of
    - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
    - * GNU General Public License for more details.
    - *
    - * You should have received a copy of the GNU General Public License
    - * along with this program; if not, write to the Free Software
    - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
    - */
    -
    -#include <linux/platform_device.h>
    -#include <linux/module.h>
    -#include <linux/moduleparam.h>
    -#include <linux/interrupt.h>
    -#include <linux/fs.h>
    -#include <linux/reboot.h>
    -#include <linux/notifier.h>
    -#include <linux/miscdevice.h>
    -#include <linux/watchdog.h>
    -#include <linux/io.h>
    -#include <linux/uaccess.h>
    -#include <asm/atomic.h>
    -#include <asm/processor.h>
    -#include <asm/system.h>
    -#include <asm/rm9k-ocd.h>
    -
    -#include <rm9k_wdt.h>
    -
    -
    -#define CLOCK 125000000
    -#define MAX_TIMEOUT_SECONDS 32
    -#define CPCCR 0x0080
    -#define CPGIG1SR 0x0044
    -#define CPGIG1ER 0x0054
    -
    -
    -/* Function prototypes */
    -static irqreturn_t wdt_gpi_irqhdl(int, void *);
    -static void wdt_gpi_start(void);
    -static void wdt_gpi_stop(void);
    -static void wdt_gpi_set_timeout(unsigned int);
    -static int wdt_gpi_open(struct inode *, struct file *);
    -static int wdt_gpi_release(struct inode *, struct file *);
    -static ssize_t wdt_gpi_write(struct file *, const char __user *, size_t,
    - loff_t *);
    -static long wdt_gpi_ioctl(struct file *, unsigned int, unsigned long);
    -static int wdt_gpi_notify(struct notifier_block *, unsigned long, void *);
    -static const struct resource *wdt_gpi_get_resource(struct platform_device *,
    - const char *, unsigned int);
    -static int __init wdt_gpi_probe(struct platform_device *);
    -static int __exit wdt_gpi_remove(struct platform_device *);
    -
    -
    -static const char wdt_gpi_name[] = "wdt_gpi";
    -static atomic_t opencnt;
    -static int expect_close;
    -static int locked;
    -
    -
    -/* These are set from device resources */
    -static void __iomem *wd_regs;
    -static unsigned int wd_irq, wd_ctr;
    -
    -
    -/* Module arguments */
    -static int timeout = MAX_TIMEOUT_SECONDS;
    -module_param(timeout, int, 0444);
    -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds");
    -
    -static unsigned long resetaddr = 0xbffdc200;
    -module_param(resetaddr, ulong, 0444);
    -MODULE_PARM_DESC(resetaddr, "Address to write to to force a reset");
    -
    -static unsigned long flagaddr = 0xbffdc104;
    -module_param(flagaddr, ulong, 0444);
    -MODULE_PARM_DESC(flagaddr, "Address to write to boot flags to");
    -
    -static int powercycle;
    -module_param(powercycle, bool, 0444);
    -MODULE_PARM_DESC(powercycle, "Cycle power if watchdog expires");
    -
    -static int nowayout = WATCHDOG_NOWAYOUT;
    -module_param(nowayout, bool, 0444);
    -MODULE_PARM_DESC(nowayout, "Watchdog cannot be disabled once started");
    -
    -
    -/* Kernel interfaces */
    -static const struct file_operations fops = {
    - .owner = THIS_MODULE,
    - .open = wdt_gpi_open,
    - .release = wdt_gpi_release,
    - .write = wdt_gpi_write,
    - .unlocked_ioctl = wdt_gpi_ioctl,
    -};
    -
    -static struct miscdevice miscdev = {
    - .minor = WATCHDOG_MINOR,
    - .name = wdt_gpi_name,
    - .fops = &fops,
    -};
    -
    -static struct notifier_block wdt_gpi_shutdown = {
    - .notifier_call = wdt_gpi_notify,
    -};
    -
    -
    -/* Interrupt handler */
    -static irqreturn_t wdt_gpi_irqhdl(int irq, void *ctxt)
    -{
    - if (!unlikely(__raw_readl(wd_regs + 0x0008) & 0x1))
    - return IRQ_NONE;
    - __raw_writel(0x1, wd_regs + 0x0008);
    -
    -
    - printk(KERN_CRIT "%s: watchdog expired - resetting system\n",
    - wdt_gpi_name);
    -
    - *(volatile char *) flagaddr |= 0x01;
    - *(volatile char *) resetaddr = powercycle ? 0x01 : 0x2;
    - iob();
    - while (1)
    - cpu_relax();
    -}
    -
    -
    -/* Watchdog functions */
    -static void wdt_gpi_start(void)
    -{
    - u32 reg;
    -
    - lock_titan_regs();
    - reg = titan_readl(CPGIG1ER);
    - titan_writel(reg | (0x100 << wd_ctr), CPGIG1ER);
    - iob();
    - unlock_titan_regs();
    -}
    -
    -static void wdt_gpi_stop(void)
    -{
    - u32 reg;
    -
    - lock_titan_regs();
    - reg = titan_readl(CPCCR) & ~(0xf << (wd_ctr * 4));
    - titan_writel(reg, CPCCR);
    - reg = titan_readl(CPGIG1ER);
    - titan_writel(reg & ~(0x100 << wd_ctr), CPGIG1ER);
    - iob();
    - unlock_titan_regs();
    -}
    -
    -static void wdt_gpi_set_timeout(unsigned int to)
    -{
    - u32 reg;
    - const u32 wdval = (to * CLOCK) & ~0x0000000f;
    -
    - lock_titan_regs();
    - reg = titan_readl(CPCCR) & ~(0xf << (wd_ctr * 4));
    - titan_writel(reg, CPCCR);
    - wmb();
    - __raw_writel(wdval, wd_regs + 0x0000);
    - wmb();
    - titan_writel(reg | (0x2 << (wd_ctr * 4)), CPCCR);
    - wmb();
    - titan_writel(reg | (0x5 << (wd_ctr * 4)), CPCCR);
    - iob();
    - unlock_titan_regs();
    -}
    -
    -
    -/* /dev/watchdog operations */
    -static int wdt_gpi_open(struct inode *inode, struct file *file)
    -{
    - int res;
    -
    - if (unlikely(atomic_dec_if_positive(&opencnt) < 0))
    - return -EBUSY;
    -
    - expect_close = 0;
    - if (locked) {
    - module_put(THIS_MODULE);
    - free_irq(wd_irq, &miscdev);
    - locked = 0;
    - }
    -
    - res = request_irq(wd_irq, wdt_gpi_irqhdl, IRQF_SHARED | IRQF_DISABLED,
    - wdt_gpi_name, &miscdev);
    - if (unlikely(res))
    - return res;
    -
    - wdt_gpi_set_timeout(timeout);
    - wdt_gpi_start();
    -
    - printk(KERN_INFO "%s: watchdog started, timeout = %u seconds\n",
    - wdt_gpi_name, timeout);
    - return nonseekable_open(inode, file);
    -}
    -
    -static int wdt_gpi_release(struct inode *inode, struct file *file)
    -{
    - if (nowayout) {
    - printk(KERN_INFO "%s: no way out - watchdog left running\n",
    - wdt_gpi_name);
    - __module_get(THIS_MODULE);
    - locked = 1;
    - } else {
    - if (expect_close) {
    - wdt_gpi_stop();
    - free_irq(wd_irq, &miscdev);
    - printk(KERN_INFO "%s: watchdog stopped\n",
    - wdt_gpi_name);
    - } else {
    - printk(KERN_CRIT "%s: unexpected close() -"
    - " watchdog left running\n",
    - wdt_gpi_name);
    - wdt_gpi_set_timeout(timeout);
    - __module_get(THIS_MODULE);
    - locked = 1;
    - }
    - }
    -
    - atomic_inc(&opencnt);
    - return 0;
    -}
    -
    -static ssize_t wdt_gpi_write(struct file *f, const char __user *d, size_t s,
    - loff_t *o)
    -{
    - char val;
    -
    - wdt_gpi_set_timeout(timeout);
    - expect_close = (s > 0) && !get_user(val, d) && (val == 'V');
    - return s ? 1 : 0;
    -}
    -
    -static long wdt_gpi_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
    -{
    - long res = -ENOTTY;
    - const long size = _IOC_SIZE(cmd);
    - int stat;
    - void __user *argp = (void __user *)arg;
    - static struct watchdog_info wdinfo = {
    - .identity = "RM9xxx/GPI watchdog",
    - .firmware_version = 0,
    - .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING
    - };
    -
    - if (unlikely(_IOC_TYPE(cmd) != WATCHDOG_IOCTL_BASE))
    - return -ENOTTY;
    -
    - if ((_IOC_DIR(cmd) & _IOC_READ)
    - && !access_ok(VERIFY_WRITE, arg, size))
    - return -EFAULT;
    -
    - if ((_IOC_DIR(cmd) & _IOC_WRITE)
    - && !access_ok(VERIFY_READ, arg, size))
    - return -EFAULT;
    -
    - expect_close = 0;
    -
    - switch (cmd) {
    - case WDIOC_GETSUPPORT:
    - wdinfo.options = nowayout ?
    - WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING :
    - WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
    - WDIOF_MAGICCLOSE;
    - res = __copy_to_user(argp, &wdinfo, size) ? -EFAULT : size;
    - break;
    -
    - case WDIOC_GETSTATUS:
    - break;
    -
    - case WDIOC_GETBOOTSTATUS:
    - stat = (*(volatile char *) flagaddr & 0x01)
    - ? WDIOF_CARDRESET : 0;
    - res = __copy_to_user(argp, &stat, size) ?
    - -EFAULT : size;
    - break;
    -
    - case WDIOC_SETOPTIONS:
    - break;
    -
    - case WDIOC_KEEPALIVE:
    - wdt_gpi_set_timeout(timeout);
    - res = size;
    - break;
    -
    - case WDIOC_SETTIMEOUT:
    - {
    - int val;
    - if (unlikely(__copy_from_user(&val, argp, size))) {
    - res = -EFAULT;
    - break;
    - }
    -
    - if (val > MAX_TIMEOUT_SECONDS)
    - val = MAX_TIMEOUT_SECONDS;
    - timeout = val;
    - wdt_gpi_set_timeout(val);
    - res = size;
    - printk(KERN_INFO "%s: timeout set to %u seconds\n",
    - wdt_gpi_name, timeout);
    - }
    - break;
    -
    - case WDIOC_GETTIMEOUT:
    - res = __copy_to_user(argp, &timeout, size) ?
    - -EFAULT : size;
    - break;
    - }
    -
    - return res;
    -}
    -
    -
    -/* Shutdown notifier */
    -static int wdt_gpi_notify(struct notifier_block *this, unsigned long code,
    - void *unused)
    -{
    - if (code == SYS_DOWN || code == SYS_HALT)
    - wdt_gpi_stop();
    -
    - return NOTIFY_DONE;
    -}
    -
    -
    -/* Init & exit procedures */
    -static const struct resource *wdt_gpi_get_resource(struct platform_device *pdv,
    - const char *name, unsigned int type)
    -{
    - char buf[80];
    - if (snprintf(buf, sizeof(buf), "%s_0", name) >= sizeof(buf))
    - return NULL;
    - return platform_get_resource_byname(pdv, type, buf);
    -}
    -
    -/* No hotplugging on the platform bus - use __devinit */
    -static int __devinit wdt_gpi_probe(struct platform_device *pdv)
    -{
    - int res;
    - const struct resource
    - * const rr = wdt_gpi_get_resource(pdv, WDT_RESOURCE_REGS,
    - IORESOURCE_MEM),
    - * const ri = wdt_gpi_get_resource(pdv, WDT_RESOURCE_IRQ,
    - IORESOURCE_IRQ),
    - * const rc = wdt_gpi_get_resource(pdv, WDT_RESOURCE_COUNTER,
    - 0);
    -
    - if (unlikely(!rr || !ri || !rc))
    - return -ENXIO;
    -
    - wd_regs = ioremap_nocache(rr->start, rr->end + 1 - rr->start);
    - if (unlikely(!wd_regs))
    - return -ENOMEM;
    - wd_irq = ri->start;
    - wd_ctr = rc->start;
    - res = misc_register(&miscdev);
    - if (res)
    - iounmap(wd_regs);
    - else
    - register_reboot_notifier(&wdt_gpi_shutdown);
    - return res;
    -}
    -
    -static int __devexit wdt_gpi_remove(struct platform_device *dev)
    -{
    - int res;
    -
    - unregister_reboot_notifier(&wdt_gpi_shutdown);
    - res = misc_deregister(&miscdev);
    - iounmap(wd_regs);
    - wd_regs = NULL;
    - return res;
    -}
    -
    -
    -/* Device driver init & exit */
    -static struct platform_driver wgt_gpi_driver = {
    - .driver = {
    - .name = wdt_gpi_name,
    - .owner = THIS_MODULE,
    - },
    - .probe = wdt_gpi_probe,
    - .remove = __devexit_p(wdt_gpi_remove),
    -};
    -
    -static int __init wdt_gpi_init_module(void)
    -{
    - atomic_set(&opencnt, 1);
    - if (timeout > MAX_TIMEOUT_SECONDS)
    - timeout = MAX_TIMEOUT_SECONDS;
    - return platform_driver_register(&wdt_gpi_driver);
    -}
    -
    -static void __exit wdt_gpi_cleanup_module(void)
    -{
    - platform_driver_unregister(&wdt_gpi_driver);
    -}
    -
    -module_init(wdt_gpi_init_module);
    -module_exit(wdt_gpi_cleanup_module);
    -
    -MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>");
    -MODULE_DESCRIPTION("Basler eXcite watchdog driver for gpi devices");
    -MODULE_VERSION("0.1");
    -MODULE_LICENSE("GPL");
    -MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
    -
    Index: linux-queue/drivers/watchdog/Kconfig
    ===================================================================
    --- linux-queue.orig/drivers/watchdog/Kconfig
    +++ linux-queue/drivers/watchdog/Kconfig
    @@ -815,16 +815,6 @@ config PNX833X_WDT
    timer has expired and no process has written to /dev/watchdog during
    that time.

    -config WDT_RM9K_GPI
    - tristate "RM9000/GPI hardware watchdog"
    - depends on CPU_RM9000
    - help
    - Watchdog implementation using the GPI hardware found on
    - PMC-Sierra RM9xxx CPUs.
    -
    - To compile this driver as a module, choose M here: the
    - module will be called rm9k_wdt.
    -
    config SIBYTE_WDOG
    tristate "Sibyte SoC hardware watchdog"
    depends on CPU_SB1
    Index: linux-queue/arch/mips/pci/pci-excite.c
    ===================================================================
    --- linux-queue.orig/arch/mips/pci/pci-excite.c
    +++ /dev/null
    @@ -1,149 +0,0 @@
    -/*
    - * Copyright (C) 2004 by Basler Vision Technologies AG
    - * Author: Thomas Koeller <thomas.koeller@baslerweb.com>
    - * Based on the PMC-Sierra Yosemite board support by Ralf Baechle.
    - *
    - * This program is free software; you can redistribute it and/or modify
    - * it under the terms of the GNU General Public License as published by
    - * the Free Software Foundation; either version 2 of the License, or
    - * (at your option) any later version.
    - *
    - * This program is distributed in the hope that it will be useful,
    - * but WITHOUT ANY WARRANTY; without even the implied warranty of
    - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
    - * GNU General Public License for more details.
    - *
    - * You should have received a copy of the GNU General Public License
    - * along with this program; if not, write to the Free Software
    - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
    - */
    -#include <linux/init.h>
    -#include <linux/kernel.h>
    -#include <linux/types.h>
    -#include <linux/pci.h>
    -#include <linux/bitops.h>
    -#include <asm/rm9k-ocd.h>
    -#include <excite.h>
    -
    -
    -extern struct pci_ops titan_pci_ops;
    -
    -
    -static struct resource
    - mem_resource = {
    - .name = "PCI memory",
    - .start = EXCITE_PHYS_PCI_MEM,
    - .end = EXCITE_PHYS_PCI_MEM + EXCITE_SIZE_PCI_MEM - 1,
    - .flags = IORESOURCE_MEM
    - },
    - io_resource = {
    - .name = "PCI I/O",
    - .start = EXCITE_PHYS_PCI_IO,
    - .end = EXCITE_PHYS_PCI_IO + EXCITE_SIZE_PCI_IO - 1,
    - .flags = IORESOURCE_IO
    - };
    -
    -
    -static struct pci_controller bx_controller = {
    - .pci_ops = &titan_pci_ops,
    - .mem_resource = &mem_resource,
    - .mem_offset = 0x00000000UL,
    - .io_resource = &io_resource,
    - .io_offset = 0x00000000UL
    -};
    -
    -
    -static char
    - iopage_failed[] __initdata = "Cannot allocate PCI I/O page",
    - modebits_no_pci[] __initdata = "PCI is not configured in mode bits";
    -
    -#define RM9000x2_OCD_HTSC 0x0604
    -#define RM9000x2_OCD_HTBHL 0x060c
    -#define RM9000x2_OCD_PCIHRST 0x078c
    -
    -#define RM9K_OCD_MODEBIT1 0x00d4 /* (MODEBIT1) Mode Bit 1 */
    -#define RM9K_OCD_CPHDCR 0x00f4 /* CPU-PCI/HT Data Control. */
    -
    -#define PCISC_FB2B 0x00000200
    -#define PCISC_MWICG 0x00000010
    -#define PCISC_EMC 0x00000004
    -#define PCISC_ERMA 0x00000002
    -
    -
    -
    -static int __init basler_excite_pci_setup(void)
    -{
    - const unsigned int fullbars = memsize / (256 << 20);
    - unsigned int i;
    -
    - /* Check modebits to see if PCI is really enabled. */
    - if (!((ocd_readl(RM9K_OCD_MODEBIT1) >> (47-32)) & 0x1))
    - panic(modebits_no_pci);
    -
    - if (NULL == request_mem_region(EXCITE_PHYS_PCI_IO, EXCITE_SIZE_PCI_IO,
    - "Memory-mapped PCI I/O page"))
    - panic(iopage_failed);
    -
    - /* Enable PCI 0 as master for config cycles */
    - ocd_writel(PCISC_EMC | PCISC_ERMA, RM9000x2_OCD_HTSC);
    -
    -
    - /* Set up latency timer */
    - ocd_writel(0x8008, RM9000x2_OCD_HTBHL);
    -
    - /* Setup host IO and Memory space */
    - ocd_writel((EXCITE_PHYS_PCI_IO >> 4) | 1, LKB7);
    - ocd_writel(((EXCITE_SIZE_PCI_IO >> 4) & 0x7fffff00) - 0x100, LKM7);
    - ocd_writel((EXCITE_PHYS_PCI_MEM >> 4) | 1, LKB8);
    - ocd_writel(((EXCITE_SIZE_PCI_MEM >> 4) & 0x7fffff00) - 0x100, LKM8);
    -
    - /* Set up PCI BARs to map all installed memory */
    - for (i = 0; i < 6; i++) {
    - const unsigned int bar = 0x610 + i * 4;
    -
    - if (i < fullbars) {
    - ocd_writel(0x10000000 * i, bar);
    - ocd_writel(0x01000000 * i, bar + 0x140);
    - ocd_writel(0x0ffff029, bar + 0x100);
    - continue;
    - }
    -
    - if (i == fullbars) {
    - int o;
    - u32 mask;
    -
    - const unsigned long rem = memsize - i * 0x10000000;
    - if (!rem) {
    - ocd_writel(0x00000000, bar + 0x100);
    - continue;
    - }
    -
    - o = ffs(rem) - 1;
    - if (rem & ~(0x1 << o))
    - o++;
    - mask = ((0x1 << o) & 0x0ffff000) - 0x1000;
    - ocd_writel(0x10000000 * i, bar);
    - ocd_writel(0x01000000 * i, bar + 0x140);
    - ocd_writel(0x00000029 | mask, bar + 0x100);
    - continue;
    - }
    -
    - ocd_writel(0x00000000, bar + 0x100);
    - }
    -
    - /* Finally, enable the PCI interrupt */
    -#if USB_IRQ > 7
    - set_c0_intcontrol(1 << USB_IRQ);
    -#else
    - set_c0_status(1 << (USB_IRQ + 8));
    -#endif
    -
    - ioport_resource.start = EXCITE_PHYS_PCI_IO;
    - ioport_resource.end = EXCITE_PHYS_PCI_IO + EXCITE_SIZE_PCI_IO - 1;
    - set_io_port_base((unsigned long) ioremap_nocache(EXCITE_PHYS_PCI_IO, EXCITE_SIZE_PCI_IO));
    - register_pci_controller(&bx_controller);
    - return 0;
    -}
    -
    -
    -arch_initcall(basler_excite_pci_setup);
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/
    \
     
     \ /
      Last update: 2009-12-02 17:53    [W:0.274 / U:211.848 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site