Messages in this thread | | | Date | Mon, 30 Nov 2009 00:19:58 -0800 | From | Yinghai Lu <> | Subject | Re: [PATCH 0/9] pci: update pci bridge resource to get more big range for devices under it - v13 |
| |
Kenji Kaneshige wrote: > Yinghai Lu wrote: >> Kenji Kaneshige wrote: >>> My system doesn't boot (hangup) with the following error messages >>> from Fusion MPT SAS driver. Those are different from the one >>> captured with the previous version of your patches. >>> >>> >>> Fusion MPT SAS Host driver 3.04.12 >>> mptsas 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 >>> mptbase: ioc0: Initiating bringup >>> mptbase: ioc0: WARNING - Unexpected doorbell active! >>> mptbase: ioc0: ERROR - Failed to come READY after reset! >>> IocState=f0000000 >>> mptbase: ioc0: WARNING - ResetHistory bit failed to clear! >>> mptbase: ioc0: ERROR - Diagnostic reset FAILED! (ffffffffh) >>> mptbase: ioc0: WARNING - NOT READY WARNING! >>> mptbase: ioc0: ERROR - didn't initialize properly! (-1) >>> mptsas: probe of 0000:09:00.0 failed with error -1 >>> mptsas 0000:0a:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 >>> mptbase: ioc1: Initiating bringup >>> mptbase: ioc1: WARNING - Unexpected doorbell active! >>> mptbase: ioc1: ERROR - Failed to come READY after reset! >>> IocState=f0000000 >>> mptbase: ioc1: WARNING - ResetHistory bit failed to clear! >>> mptbase: ioc1: ERROR - Diagnostic reset FAILED! (ffffffffh) >>> mptbase: ioc1: WARNING - NOT READY WARNING! >>> mptbase: ioc1: ERROR - didn't initialize properly! (-1) >>> mptsas: probe of 0000:0a:00.0 failed with error -1 >>> >>> >>> I'll send the whole boot log privately. >> >> thanks, at the same time please try "debug pci=try=1" >> > > I confirmed system boot up without errors by "pci=try=1". > I'll capture the bootlog with "debug" option and send it > to you soon.
Please also try "debug pci=try=7" it should work too.
Thanks
Yinghai
| |