lkml.org 
[lkml]   [2009]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/9] pci: update pci bridge resource to get more big range for devices under it - v13
Yinghai Lu wrote:
> Kenji Kaneshige wrote:
>> My system doesn't boot (hangup) with the following error messages
>> from Fusion MPT SAS driver. Those are different from the one
>> captured with the previous version of your patches.
>>
>>
>> Fusion MPT SAS Host driver 3.04.12
>> mptsas 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>> mptbase: ioc0: Initiating bringup
>> mptbase: ioc0: WARNING - Unexpected doorbell active!
>> mptbase: ioc0: ERROR - Failed to come READY after reset! IocState=f0000000
>> mptbase: ioc0: WARNING - ResetHistory bit failed to clear!
>> mptbase: ioc0: ERROR - Diagnostic reset FAILED! (ffffffffh)
>> mptbase: ioc0: WARNING - NOT READY WARNING!
>> mptbase: ioc0: ERROR - didn't initialize properly! (-1)
>> mptsas: probe of 0000:09:00.0 failed with error -1
>> mptsas 0000:0a:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>> mptbase: ioc1: Initiating bringup
>> mptbase: ioc1: WARNING - Unexpected doorbell active!
>> mptbase: ioc1: ERROR - Failed to come READY after reset! IocState=f0000000
>> mptbase: ioc1: WARNING - ResetHistory bit failed to clear!
>> mptbase: ioc1: ERROR - Diagnostic reset FAILED! (ffffffffh)
>> mptbase: ioc1: WARNING - NOT READY WARNING!
>> mptbase: ioc1: ERROR - didn't initialize properly! (-1)
>> mptsas: probe of 0000:0a:00.0 failed with error -1
>>
>>
>> I'll send the whole boot log privately.
>
> thanks, at the same time please try "debug pci=try=1"
>

I confirmed system boot up without errors by "pci=try=1".
I'll capture the bootlog with "debug" option and send it
to you soon.

Thanks,
Kenji Kaneshige




\
 
 \ /
  Last update: 2009-11-30 08:29    [from the cache]
©2003-2014 Jasper Spaans. hosted at Digital Ocean