lkml.org 
[lkml]   [2009]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 3/3] [resend] usbtouchscreen: add NEXIO (or iNexio) support
From
Date
Add support for NEXIO (or iNexio) USB touchscreens to usbtouchscreen driver.
Tested with NEX170MRT 17" LCD monitor with integrated touchscreen
(with xserver-xorg-input-evtouch 0.8.8-1):

T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 54 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=1870 ProdID=0001 Rev= 1.00
S:  Manufacturer=iNexio
S:  Product=iNexio USB
C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms

No datasheet is available, this was written by capturing some data with
SniffUSB in Windows:
http://www.rainbow-software.org/linux_files/nexio/


Signed-off-by: Ondrej Zary <linux@rainbow-software.org>

--- linux-source-2.6.31/drivers/input/touchscreen/usbtouchscreen.c.2 2009-11-23 10:40:08.000000000 +0100
+++ linux-source-2.6.31/drivers/input/touchscreen/usbtouchscreen.c 2009-11-23 10:52:38.000000000 +0100
@@ -13,6 +13,7 @@
* - IdealTEK URTC1000
* - General Touch
* - GoTop Super_Q2/GogoPen/PenPower tablets
+ * - NEXIO/iNexio
*
* Copyright (C) 2004-2007 by Daniel Ritz <daniel.ritz@gmx.ch>
* Copyright (C) by Todd E. Johnson (mtouchusb.c)
@@ -71,6 +72,7 @@ struct usbtouch_device_info {
int min_yc, max_yc;
int min_press, max_press;
int rept_size;
+ bool no_urb_in_open;

void (*process_pkt) (struct usbtouch_usb *usbtouch, unsigned char *pkt, int len);

@@ -84,6 +86,7 @@ struct usbtouch_device_info {

int (*read_data) (struct usbtouch_usb *usbtouch, unsigned char *pkt);
int (*init) (struct usbtouch_usb *usbtouch);
+ void (*exit) (struct usbtouch_usb *usbtouch);
};

/* a usbtouch device */
@@ -98,6 +101,7 @@ struct usbtouch_usb {
struct usbtouch_device_info *type;
char name[128];
char phys[64];
+ void *priv;

int x, y;
int touch, press;
@@ -118,6 +122,7 @@ enum {
DEVTYPE_IDEALTEK,
DEVTYPE_GENERAL_TOUCH,
DEVTYPE_GOTOP,
+ DEVTYPE_NEXIO,
};

#define USB_DEVICE_HID_CLASS(vend, prod) \
@@ -191,6 +196,14 @@ static struct usb_device_id usbtouch_dev
{USB_DEVICE(0x08f2, 0x00f4), .driver_info = DEVTYPE_GOTOP},
#endif

+#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
+ /* data interface only */
+ {USB_DEVICE_AND_INTERFACE_INFO(0x10f0, 0x2002, 0x0a, 0x00, 0x00),
+ .driver_info = DEVTYPE_NEXIO},
+ {USB_DEVICE_AND_INTERFACE_INFO(0x1870, 0x0001, 0x0a, 0x00, 0x00),
+ .driver_info = DEVTYPE_NEXIO},
+#endif
+
{}
};

@@ -564,6 +577,215 @@ static int gotop_read_data(struct usbtou
}
#endif

+/*****************************************************************************
+ * NEXIO Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
+
+#define NEXIO_TIMEOUT 5000
+#define NEXIO_BUFSIZE 1024
+#define NEXIO_THRESHOLD 50
+
+struct nexio_priv {
+ struct urb *ack;
+ unsigned char *ack_buf;
+};
+
+struct nexio_touch_packet {
+ u8 flags; /* 0xe1 = touch, 0xe1 = release */
+ __be16 data_len; /* total bytes of touch data */
+ __be16 x_len; /* bytes for X axis */
+ __be16 y_len; /* bytes for Y axis */
+ u8 data[];
+} __attribute__ ((packed));
+
+static unsigned char nexio_ack_pkt[2] = { 0xaa, 0x02 };
+static unsigned char nexio_init_pkt[4] = { 0x82, 0x04, 0x0a, 0x0f };
+
+static int nexio_init(struct usbtouch_usb *usbtouch)
+{
+ struct usb_device *dev = interface_to_usbdev(usbtouch->interface);
+ struct usb_host_interface *interface = usbtouch->interface->cur_altsetting;
+ struct nexio_priv *priv;
+ int ret = -ENOMEM;
+ int actual_len, i;
+ unsigned char *buf;
+ char *firmware_ver = NULL, *device_name = NULL;
+ int input_ep = 0, output_ep = 0;
+
+ /* find first input and output endpoint */
+ for (i = 0; i < interface->desc.bNumEndpoints; i++) {
+ if (!input_ep &&
+ usb_endpoint_dir_in(&interface->endpoint[i].desc))
+ input_ep = interface->endpoint[i].desc.bEndpointAddress;
+ if (!output_ep &&
+ usb_endpoint_dir_out(&interface->endpoint[i].desc))
+ output_ep = interface->endpoint[i].desc.bEndpointAddress;
+ }
+ if (!input_ep || !output_ep)
+ return -ENXIO;
+
+ buf = kmalloc(NEXIO_BUFSIZE, GFP_KERNEL);
+ if (!buf)
+ goto out_buf;
+ /* two empty reads */
+ for (i = 0; i < 2; i++) {
+ ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, input_ep),
+ buf, NEXIO_BUFSIZE, &actual_len,
+ NEXIO_TIMEOUT);
+ if (ret < 0)
+ goto out_buf;
+ }
+ /* send init command */
+ memcpy(buf, nexio_init_pkt, sizeof(nexio_init_pkt));
+ ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, output_ep),
+ buf, sizeof(nexio_init_pkt), &actual_len,
+ NEXIO_TIMEOUT);
+ if (ret < 0)
+ goto out_buf;
+ /* read replies */
+ for (i = 0; i < 3; i++) {
+ memset(buf, 0, NEXIO_BUFSIZE);
+ ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, input_ep),
+ buf, NEXIO_BUFSIZE, &actual_len,
+ NEXIO_TIMEOUT);
+ if (ret < 0 || actual_len < 1 || buf[1] != actual_len)
+ continue;
+ switch (buf[0]) {
+ case 0x83: /* firmware version */
+ if (!firmware_ver)
+ firmware_ver = kstrdup(&buf[2],
+ GFP_KERNEL);
+ break;
+ case 0x84: /* device name */
+ if (!device_name)
+ device_name = kstrdup(&buf[2],
+ GFP_KERNEL);
+ break;
+ }
+ }
+ printk(KERN_INFO "Nexio device: %s, firmware version: %s\n",
+ device_name, firmware_ver);
+ kfree(firmware_ver);
+ kfree(device_name);
+
+ /* prepare ACK URB */
+ ret = -ENOMEM;
+ usbtouch->priv = kmalloc(sizeof(struct nexio_priv), GFP_KERNEL);
+ if (!usbtouch->priv)
+ goto out_buf;
+ priv = usbtouch->priv;
+ priv->ack_buf = kmalloc(sizeof(nexio_ack_pkt), GFP_KERNEL);
+ if (!priv->ack_buf)
+ goto err_priv;
+ memcpy(priv->ack_buf, nexio_ack_pkt, sizeof(nexio_ack_pkt));
+ priv->ack = usb_alloc_urb(0, GFP_KERNEL);
+ if (!priv->ack) {
+ dbg("%s - usb_alloc_urb failed: usbtouch->ack", __func__);
+ goto err_ack_buf;
+ }
+ usb_fill_bulk_urb(priv->ack, dev, usb_sndbulkpipe(dev, output_ep),
+ priv->ack_buf, sizeof(priv->ack_buf), NULL,
+ usbtouch);
+ /* submit first IRQ URB */
+ ret = usb_submit_urb(usbtouch->irq, GFP_KERNEL);
+ if (ret < 0) {
+ usb_free_urb(priv->ack);
+ goto err_ack_buf;
+ }
+ goto out_buf;
+err_ack_buf:
+ kfree(priv->ack_buf);
+err_priv:
+ kfree(priv);
+out_buf:
+ kfree(buf);
+ return ret;
+}
+
+static void nexio_exit(struct usbtouch_usb *usbtouch)
+{
+ struct nexio_priv *priv = usbtouch->priv;
+
+ usb_kill_urb(priv->ack);
+ usb_free_urb(priv->ack);
+ kfree(priv);
+}
+
+static int nexio_read_data(struct usbtouch_usb *usbtouch, unsigned char *pkt)
+{
+ int x, y, begin_x, begin_y, end_x, end_y, w, h, ret;
+ struct nexio_touch_packet *packet = (void *) pkt;
+ struct nexio_priv *priv = usbtouch->priv;
+
+ /* got touch data? */
+ if ((pkt[0] & 0xe0) != 0xe0)
+ return 0;
+
+ /* send ACK */
+ ret = usb_submit_urb(priv->ack, GFP_ATOMIC);
+
+ if (!usbtouch->type->max_xc) {
+ usbtouch->type->max_xc = 2 * be16_to_cpu(packet->x_len);
+ input_set_abs_params(usbtouch->input, ABS_X, 0,
+ 2 * be16_to_cpu(packet->x_len), 0, 0);
+ usbtouch->type->max_yc = 2 * be16_to_cpu(packet->y_len);
+ input_set_abs_params(usbtouch->input, ABS_Y, 0,
+ 2 * be16_to_cpu(packet->y_len), 0, 0);
+ }
+ /* The device reports state of IR sensors on X and Y axes.
+ * Each byte represents "darkness" percentage (0-100) of one element.
+ * 17" touchscreen reports only 64 x 52 bytes so the resolution is low.
+ * This also means that there's a limited multi-touch capability but
+ * it's disabled (and untested) here as there's no X driver for that.
+ */
+ begin_x = end_x = begin_y = end_y = -1;
+ for (x = 0; x < be16_to_cpu(packet->x_len); x++) {
+ if (begin_x == -1 && packet->data[x] > NEXIO_THRESHOLD) {
+ begin_x = x;
+ continue;
+ }
+ if (end_x == -1 && begin_x != -1 && packet->data[x] < NEXIO_THRESHOLD) {
+ end_x = x - 1;
+ for (y = be16_to_cpu(packet->x_len);
+ y < be16_to_cpu(packet->data_len); y++) {
+ if (begin_y == -1 && packet->data[y] > NEXIO_THRESHOLD) {
+ begin_y = y - be16_to_cpu(packet->x_len);
+ continue;
+ }
+ if (end_y == -1 &&
+ begin_y != -1 && packet->data[y] < NEXIO_THRESHOLD) {
+ end_y = y - 1 - be16_to_cpu(packet->x_len);
+ w = end_x - begin_x;
+ h = end_y - begin_y;
+ /* multi-touch */
+/* input_report_abs(usbtouch->input,
+ ABS_MT_TOUCH_MAJOR, max(w,h));
+ input_report_abs(usbtouch->input,
+ ABS_MT_TOUCH_MINOR, min(x,h));
+ input_report_abs(usbtouch->input,
+ ABS_MT_POSITION_X, 2*begin_x+w);
+ input_report_abs(usbtouch->input,
+ ABS_MT_POSITION_Y, 2*begin_y+h);
+ input_report_abs(usbtouch->input,
+ ABS_MT_ORIENTATION, w > h);
+ input_mt_sync(usbtouch->input);*/
+ /* single touch */
+ usbtouch->x = 2 * begin_x + w;
+ usbtouch->y = 2 * begin_y + h;
+ usbtouch->touch = packet->flags & 0x01;
+ begin_y = end_y = -1;
+ return 1;
+ }
+ }
+ begin_x = end_x = -1;
+ }
+
+ }
+ return 0;
+}
+#endif
+

/*****************************************************************************
* the different device descriptors
@@ -703,6 +925,16 @@ static struct usbtouch_device_info usbto
.read_data = gotop_read_data,
},
#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
+ [DEVTYPE_NEXIO] = {
+ .rept_size = 128,
+ .no_urb_in_open = 1,
+ .read_data = nexio_read_data,
+ .init = nexio_init,
+ .exit = nexio_exit,
+ },
+#endif
};


@@ -853,8 +1085,9 @@ static int usbtouch_open(struct input_de

usbtouch->irq->dev = interface_to_usbdev(usbtouch->interface);

- if (usb_submit_urb(usbtouch->irq, GFP_KERNEL))
- return -EIO;
+ if (!usbtouch->type->no_urb_in_open)
+ if (usb_submit_urb(usbtouch->irq, GFP_KERNEL))
+ return -EIO;

return 0;
}
@@ -863,7 +1096,8 @@ static void usbtouch_close(struct input_
{
struct usbtouch_usb *usbtouch = input_get_drvdata(input);

- usb_kill_urb(usbtouch->irq);
+ if (!usbtouch->type->no_urb_in_open)
+ usb_kill_urb(usbtouch->irq);
}


@@ -1018,6 +1252,8 @@ static void usbtouch_disconnect(struct u
usb_kill_urb(usbtouch->irq);
input_unregister_device(usbtouch->input);
usb_free_urb(usbtouch->irq);
+ if (usbtouch->type->exit)
+ usbtouch->type->exit(usbtouch);
usbtouch_free_buffers(interface_to_usbdev(intf), usbtouch);
kfree(usbtouch);
}

--
Ondrej Zary
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2009-11-25 23:19    [W:0.036 / U:0.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site