lkml.org 
[lkml]   [2009]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [bisected] Re: todays git: WARNING: at drivers/ata/libata-sff.c:1017 ata_sff_hsm_move+0x45e/0x750()
Hello.

Alan Cox wrote:

>>>> data_xfer transfers 18 bytes + 2 padding (correctly) -> 20 bytes
>>>>
>> Correctly indeed? I'm not at all sure it's correct to read an extra
>> 16-bit word off the device when it thinks it's already done with the
>> data transfer.
>>

OTOH, once can generally read the data register with no command
active and not have anything locked up, so I'm not sure of how risky
this can be... it's better to exclude such risk though.

> The VLB controller docs explicitly require you do entirely 32bit.

Didn't VLB contollers largely predate ATAPI devices?

> The AMD ones seem to imply you should.
>

Indeed, AMD-8111 datasheet requires 32-bit writes -- but only when
the write buffer is enabled.

> Its easy enough to not do that but for the VLB case we have to so the
> WARN needs fixing which ever path we go down.
>

Sure.

MBR, Sergei




\
 
 \ /
  Last update: 2009-01-11 10:21    [W:0.117 / U:0.588 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site