lkml.org 
[lkml]   [2008]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [regression] CD-DA delay needed after insertion
From
Date
On Tue, 2008-06-17 at 15:31 +0200, Geert Uytterhoeven wrote:
> On Mon, 16 Jun 2008, James Bottomley wrote:
> > On Mon, 2008-06-16 at 17:05 +0200, Geert Uytterhoeven wrote:
> > > On Sun, 15 Jun 2008, James Bottomley wrote:
> > > > On Fri, 2008-06-13 at 13:57 +0200, Geert Uytterhoeven wrote:
> > > > > We've found another regression in 2.6.25 w.r.t. CD media change on PS3.
> > > > >
> > > > > It can easily be reproduced by:
> > > > >
> > > > > 1. Inserting an audio CD
> > > > > 2. Running the following command as soon as the blue CD/DVD/BD drive LED
> > > > > stops blinking and is lit continuously:
> > > > >
> > > > > cdparanoia -Z -q 1-1[:1] /dev/null || echo failed
> > > > >
> > > > > On 2.6.25 (and current mainline), you have to wait ca. 10 seconds after
> > > > > insertion, or it will fail.
> > > > > On 2.6.24 and older, it just works immediately.
> > > > >
> > > > > It does not matter whether
> > > > > http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fjejb%2Fscsi-rc-fixes-2.6.git;a=commitdiff_plain;h=d1daeabf0da5bfa1943272ce508e2ba785730bf0
> > > > > is applied or not.
> > > > >
> > > > > We haven't bisected it yet.
> > > >
> > > > There aren't that many commits affecting sr between 2.6.24 and 2.6.25,
> > > > so I'd bet on the previous culprits.
> > > >
> > > > This time, the taxonomy looks like NOT_READY isn't being waited for
> > > > properly. I'd still tend to blame
> > > > 210ba1d1724f5c4ed87a2ab1a21ca861a915f734 it's just that this time I
> > >
> > > Reverting that commit doesn't fix the problem.
> >
> > That's a bit of a problem. Particularly as:
> >
> > > > suspect this to be the problem line:
> > > >
> > > > if (sshdr.sense_key == NOT_READY && sshdr.asc == 0x04)
> > > > return CDS_DISC_OK;
> > > >
> > > > Previously the code would have returned CDS_NO_DISC for the not ready
> > > > case. The CD would have tried to close the door but (and this is the
> > > > key) it would have waited for the door to close before trying again.
> > >
> > > I tried the patch below.
> > >
> > > Now the kernel spits out messages every 2 seconds:
> > >
> > > | G: CDS_NO_DISC
> > > | G: CDS_NO_DISC
> > >
> > > Insert CD-DA media
> > >
> > > Reading from CD using cdparanioa fails
> > >
> > > | F: CDS_DISC_OK
> > > | F: CDS_DISC_OK
> > > | F: CDS_DISC_OK
> > > | F: CDS_DISC_OK
> > > | F: CDS_DISC_OK
> >
> > That's in the two lines I fingered as the source of the problem ...
> > however, if reversing the apparently bad commit (that introduces those
> > lines) doesn't work there's something else wrong.
> >
> > Could you try altering your F: case to return CDS_DRIVE_NOT_READY, but
> > if that doesn't work, it's going to take a bit of bisection, I'm
> > afraid ...
>
> Doesn't make any difference.
>
> git-bisect taught me it was introduced by
>
> commit 38582a62ecd337de4212004c7d4844899dc57890
> Author: James Bottomley <James.Bottomley@HansenPartnership.com>
> Date: Wed Feb 6 13:01:58 2008 -0600
>
> [SCSI] sr: fix test unit ready responses
>
> Commit 210ba1d1724f5c4ed87a2ab1a21ca861a915f734 updated sr.c to use
> the scsi_test_unit_ready() function. Unfortunately, this has the
> wrong characteristic of eating NOT_READY returns which sr.c relies on
> for tray status.
>
> Fix by rolling an internal sr_test_unit_ready() that doesn't do this.

OK, I thought I had a test case for this, but when I revert this commit
on git head (and fix up the one reject which just leaves the sr_
function in place) I still produce the same behaviour.

What I'm trying is

sg_start -i -l <cdrom>

to close the tray followed by your cdparanoia command

Could you see if reverting this commit on git head works for you (in
which case I'm not reproducing it correctly)?

Thanks,

James




\
 
 \ /
  Last update: 2008-06-28 00:31    [W:0.141 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site