lkml.org 
[lkml]   [2008]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjecte1000 driver not loading in 2.6.24.3 on x86_64 (worked in 2.6.24-rc7)
I'm trying to move from 2.6.24-rc7 to 2.6.24.3 on a x86_64 desktop
machine. With 2.6.24.3, the e1000 driver (compiled in, not a module)
does not claim the device. In 2.6.24-rc7 it works just fine.

The ethernet device shows up in lspci in both kernels, but the driver
doesn't seem to probe the card in 2.6.24.3

2.6.24-rc7:
loop: module loaded
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:04:00.0 to 64
e1000: 0000:04:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:76:c9:33>
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
e1000e: Copyright (c) 1999-2007 Intel Corporation.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

2.6.24.3:
loop: module loaded
e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
e1000e: Copyright (c) 1999-2007 Intel Corporation.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

There were a few minor configuration changes between the two kernels
(added ACPI_SYSFS_POWER, removed ACPI_PROC_EVENT) but nothing I would
think that prevent the e1000 driver from loading.

Any ideas?
Clem


\
 
 \ /
  Last update: 2008-03-01 21:45    [W:0.045 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site