lkml.org 
[lkml]   [2008]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Regression: kernel 2.6.24{,.1} ahci problem, does not boot (resend)
On Fri, 15 Feb 2008 08:35:10 +0900
Tejun Heo <htejun@gmail.com> wrote:

> Malte Schröder wrote:
> > Hello,
> > on one of my machines neither 2.6.24 nor 2.6.24.1 work.
> > The system is 64bit on Athlon X2 and ATI-Chipset (SB600).
> >
> > Extract from the kernel messages during boot:
> >
> > [ 66.943103] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
> > [ 66.950374] ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP
> > [ 67.956470] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
> > [ 67.964996] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part
> > [ 67.972820] scsi0 : ahci
> > [ 67.975699] scsi1 : ahci
> > [ 67.978445] scsi2 : ahci
> > [ 67.981178] scsi3 : ahci
> > [ 67.983949] ata1: SATA max UDMA/133 abar m1024@0xfadffc00 port 0xfadffd00 irq 509
> > [ 67.991825] ata2: SATA max UDMA/133 abar m1024@0xfadffc00 port 0xfadffd80 irq 509
> > [ 67.999729] ata3: SATA max UDMA/133 abar m1024@0xfadffc00 port 0xfadffe00 irq 509
> > [ 68.007619] ata4: SATA max UDMA/133 abar m1024@0xfadffc00 port 0xfadffe80 irq 509
> > [ 68.470669] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> > [ 98.431945] ata1.00: qc timeout (cmd 0xec)
> > [ 98.454907] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
> > [ 98.461296] ata1: failed to recover some devices, retrying in 5 secs
> > [ 103.916773] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> > [ 133.878045] ata1.00: qc timeout (cmd 0xec)
> > [ 133.882371] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
> > [ 133.888797] ata1: failed to recover some devices, retrying in 5 secs
> > [ 139.343901] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> > [ 169.305174] ata1.00: qc timeout (cmd 0xec)
> > [ 169.309534] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
> > [ 169.315926] ata1: failed to recover some devices, retrying in 5 secs
> > [ 174.771030] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> >
> > The complete boot-log (captured via serial console), lspci output,
> > output of hdparm -I and the kernel config are attached.
> >
> > The PC has one IDE-drive and four SATA-drives (see hdparm.txt).
> > If I wait long enough, the IDE-drive get's recognized and I can
> > continue the boot process, but the SATA-drives are never recognized.
> > The system work's fine with kernel 2.6.23.11 (later kernels not tested).
>
> Does irqpoll kernel parameter help?

No, problem stays.

--
---------------------------------------
Malte Schröder
MalteSch@gmx.de
ICQ# 68121508
---------------------------------------

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2008-02-15 19:15    [W:0.078 / U:0.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site