lkml.org 
[lkml]   [2008]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Regression: kernel 2.6.24{,.1} ahci problem, does not boot (resend)
Malte Schröder wrote:
> Hello,
> on one of my machines neither 2.6.24 nor 2.6.24.1 work.
> The system is 64bit on Athlon X2 and ATI-Chipset (SB600).
>
> Extract from the kernel messages during boot:
>
> [ 66.943103] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
> [ 66.950374] ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP
> [ 67.956470] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
> [ 67.964996] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part
> [ 67.972820] scsi0 : ahci
> [ 67.975699] scsi1 : ahci
> [ 67.978445] scsi2 : ahci
> [ 67.981178] scsi3 : ahci
> [ 67.983949] ata1: SATA max UDMA/133 abar m1024@0xfadffc00 port 0xfadffd00 irq 509
> [ 67.991825] ata2: SATA max UDMA/133 abar m1024@0xfadffc00 port 0xfadffd80 irq 509
> [ 67.999729] ata3: SATA max UDMA/133 abar m1024@0xfadffc00 port 0xfadffe00 irq 509
> [ 68.007619] ata4: SATA max UDMA/133 abar m1024@0xfadffc00 port 0xfadffe80 irq 509
> [ 68.470669] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 98.431945] ata1.00: qc timeout (cmd 0xec)
> [ 98.454907] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
> [ 98.461296] ata1: failed to recover some devices, retrying in 5 secs
> [ 103.916773] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 133.878045] ata1.00: qc timeout (cmd 0xec)
> [ 133.882371] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
> [ 133.888797] ata1: failed to recover some devices, retrying in 5 secs
> [ 139.343901] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 169.305174] ata1.00: qc timeout (cmd 0xec)
> [ 169.309534] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
> [ 169.315926] ata1: failed to recover some devices, retrying in 5 secs
> [ 174.771030] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>
> The complete boot-log (captured via serial console), lspci output,
> output of hdparm -I and the kernel config are attached.
>
> The PC has one IDE-drive and four SATA-drives (see hdparm.txt).
> If I wait long enough, the IDE-drive get's recognized and I can
> continue the boot process, but the SATA-drives are never recognized.
> The system work's fine with kernel 2.6.23.11 (later kernels not tested).

Does irqpoll kernel parameter help?

--
tejun
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2008-02-15 00:37    [W:1.545 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site