lkml.org 
[lkml]   [2008]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[patch 2.6.28-rc5] regulator: improved mode error checks
Date
From: David Brownell <dbrownell@users.sourceforge.net>

Minor bugfixes in handling of regulator modes:

- have the routine verifying regulator modes check against
the set of legal modes (!);

- have regulator_set_optimum_mode() verify the return value
of regulator_ops.get_optimum_mode(), like drms_uA_update();

- one call to regulator_ops.set_mode() treated zero as a
failure code; make this consistent with other callers.

Both regulator_set_mode() and regulator_set_optimum_mode() now
require valid_ops_mask to include REGULATOR_CHANGE_MODE; that
seems like a bugfix too.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
---
drivers/regulator/core.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)

--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -174,6 +174,16 @@ static int regulator_check_current_limit
/* operating mode constraint check */
static int regulator_check_mode(struct regulator_dev *rdev, int mode)
{
+ switch (mode) {
+ case REGULATOR_MODE_FAST:
+ case REGULATOR_MODE_NORMAL:
+ case REGULATOR_MODE_IDLE:
+ case REGULATOR_MODE_STANDBY:
+ break;
+ default:
+ return -EINVAL;
+ }
+
if (!rdev->constraints) {
printk(KERN_ERR "%s: no constraints for %s\n", __func__,
rdev->desc->name);
@@ -1463,7 +1473,8 @@ int regulator_set_optimum_mode(struct re
mode = rdev->desc->ops->get_optimum_mode(rdev,
input_uV, output_uV,
total_uA_load);
- if (ret <= 0) {
+ ret = regulator_check_mode(rdev, mode);
+ if (ret < 0) {
printk(KERN_ERR "%s: failed to get optimum mode for %s @"
" %d uA %d -> %d uV\n", __func__, rdev->desc->name,
total_uA_load, input_uV, output_uV);
@@ -1471,7 +1482,7 @@ int regulator_set_optimum_mode(struct re
}

ret = rdev->desc->ops->set_mode(rdev, mode);
- if (ret <= 0) {
+ if (ret < 0) {
printk(KERN_ERR "%s: failed to set optimum mode %x for %s\n",
__func__, mode, rdev->desc->name);
goto out;

\
 
 \ /
  Last update: 2008-11-17 00:09    [W:0.044 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site