lkml.org 
[lkml]   [2008]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: aacraid: Adaptec 2200S support broken on x86_64 by commit 94cf6ba11b068b8a8f68a1e88bffb6827e92124b
From
Date
On Mon, 2008-11-10 at 15:20 -0800, Andrew Morton wrote:
> On Tue, 07 Oct 2008 15:37:04 +0200
> Tomas Henzl <thenzl@redhat.com> wrote:
>
> > Hillier, Gernot wrote:
> > > Hi there!
> > >
> > > On our AMD64 machines equipped with old Adaptec 2200S controllers, we
> > > experienced a regression when updating to 2.6.25. The machines won't
> > > boot anymore (in a reasonable time), but instead spit out tons of those
> > > messages:
> > > aac_srb: aac_fib_send failed with status: 8195
> > >
> > > This is already reported in quite some places including LKML:
> > > http://lkml.org/lkml/2008/5/12/365
> > > https://bugzilla.redhat.com/show_bug.cgi?id=450444
> > > https://bugzilla.redhat.com/show_bug.cgi?id=453472
> > > http://www.linuxquestions.org/questions/red-hat-31/aacsrb-aacfibsend-failed-with-status-8195-651078/
> > > http://forums.gentoo.org/viewtopic-p-5077382.html?sid=a51c3a0fba6aa854c0b49b8fae5cc15a
> > >
> > > We found that this regression seems to be introduced by the bugfix
> > > "aacraid: fix driver failure with Dell PowerEdge
> > > Expandable RAID Controller 3/Di":
> > > http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=94cf6ba11b068b8a8f68a1e88bffb6827e92124b
> > >
> > > By simply removing the quirk flag for our controller, we could boot again.
> > >
> > > We did some quick stress tests on an AMD64bit machine with 16GB of RAM
> > > and saw no problems after this change:
> > >
> > > diff -ur linux-2.6.25.11-0.1.ct1.orig/drivers/scsi/aacraid/linit.c linux-2.6.25.11-0.1.ct1/drivers/scsi/aacraid/linit.c
> > > --- linux-2.6.25.11-0.1.ct1.orig/drivers/scsi/aacraid/linit.c 2008-09-15 16:07:14.000000000 +0100
> > > +++ linux-2.6.25.11-0.1.ct1/drivers/scsi/aacraid/linit.c 2008-09-15 16:09:26.000000000 +0100
> > > @@ -176,7 +176,7 @@
> > > { aac_rx_init, "aacraid", "ADAPTEC ", "catapult ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* catapult */
> > > { aac_rx_init, "aacraid", "ADAPTEC ", "tomcat ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* tomcat */
> > > { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2120S ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2120S (Crusader) */
> > > - { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan) */
> > > + { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2200S (Vulcan) */
> > > { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan-2m) */
> > > { aac_rx_init, "aacraid", "Legend ", "Legend S220 ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S220 (Legend Crusader) */
> > > { aac_rx_init, "aacraid", "Legend ", "Legend S230 ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S230 (Legend Vulcan) */
> > >
> > > Can this be safely changed/merged? Or is this the wrong way to fix it?
> > >
> > > Please note that we also have machines equipped with newer Adaptec 2230S
> > > controllers (PCI ID 9005:0286) which run perfectly with the current driver.
> > >
> > >
> > Hi,
> > from what I read about this it seems to me that people are complaining also about issues with the 2120S Controller.
> > So if the patch is taken in this form the original patch should be extended to cover both controllers.
> >
> > Signed-off-by: Tomas Henzl <thenzl@redhat.com>
> >
> > ---
> > diff -Naurp linux-2.6.18.i686b/drivers/scsi/aacraid/linit.c linux-2.6.18.i686p6/drivers/scsi/aacraid/linit.c
> > --- linux-2.6.18.i686b/drivers/scsi/aacraid/linit.c 2008-09-25 18:06:23.000000000 +0200
> > +++ linux-2.6.18.i686p6/drivers/scsi/aacraid/linit.c 2008-10-03 12:12:06.000000000 +0200
> > @@ -175,8 +175,8 @@ static struct aac_driver_ident aac_drive
> > { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Boxster/PERC3DiB) */
> > { aac_rx_init, "aacraid", "ADAPTEC ", "catapult ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* catapult */
> > { aac_rx_init, "aacraid", "ADAPTEC ", "tomcat ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* tomcat */
> > - { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2120S ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2120S (Crusader) */
> > - { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan) */
> > + { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2120S ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2120S (Crusader) */
> > + { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2200S (Vulcan) */
> > { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan-2m) */
> > { aac_rx_init, "aacraid", "Legend ", "Legend S220 ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S220 (Legend Crusader) */
> > { aac_rx_init, "aacraid", "Legend ", "Legend S230 ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S230 (Legend Vulcan) */
> >
> >
>
> I added this to my tree with Tomas's title&changelog (thanks - I was
> about to whine about that). Thanks Thomas for the reminder. I tagged
> it as backportable to 2.6.25.x, 2.6.26.x and 2.6.27.x.

Could someone from Adaptec and Dell please verify that this is correct?
Mark Salyzyn no longer works there, but the aacraid@adaptec.com address
is supposed to still be working.

Thanks,

James




\
 
 \ /
  Last update: 2008-11-11 05:23    [W:0.131 / U:0.804 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site