Messages in this thread Patch in this message | | | Date | Mon, 10 Nov 2008 20:54:53 -0800 | From | Andrew Morton <> | Subject | Re: aacraid: Adaptec 2200S support broken on x86_64 by commit 94cf6ba11b068b8a8f68a1e88bffb6827e92124b |
| |
On Mon, 10 Nov 2008 20:20:57 -0800 James Bottomley <James.Bottomley@HansenPartnership.com> wrote:
> Could someone from Adaptec and Dell please verify that this is correct? > Mark Salyzyn no longer works there, but the aacraid@adaptec.com address > is supposed to still be working.
Here is the patch:
From: Tomas Henzl <thenzl@redhat.com>
A lot of 64bit machines with Adaptec 2200S and 2120S controllers don't recognize SCSI disks any more with the patch "fix driver failure with Dell PowerEdge Expandable RAID Controller 3/Di", but fail with tons of "aac_srb: aac_fib_send failed with status: 8195" instead. This patch disables the quirk introduced in the change cited above for those two controllers again.
Signed-off-by: Gernot Hillier <gernot.hillier@siemens.com> Signed-off-by: Tomas Henzl <thenzl@redhat.com> Cc: <aacraid@adaptec.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Thomas Guyot-Sionnest <dermoth@aei.ca> Cc: <stable@kernel.org> [2.6.27.x, 2.6.26.x, 2.6.25.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> ---
drivers/scsi/aacraid/linit.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff -puN drivers/scsi/aacraid/linit.c~aacraid-disable-dell-percraid-quirk-on-adaptec-2200s-and-2120s drivers/scsi/aacraid/linit.c --- a/drivers/scsi/aacraid/linit.c~aacraid-disable-dell-percraid-quirk-on-adaptec-2200s-and-2120s +++ a/drivers/scsi/aacraid/linit.c @@ -175,8 +175,8 @@ static struct aac_driver_ident aac_drive { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Boxster/PERC3DiB) */ { aac_rx_init, "aacraid", "ADAPTEC ", "catapult ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* catapult */ { aac_rx_init, "aacraid", "ADAPTEC ", "tomcat ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* tomcat */ - { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2120S ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2120S (Crusader) */ - { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2120S ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2120S (Crusader) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2200S (Vulcan) */ { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan-2m) */ { aac_rx_init, "aacraid", "Legend ", "Legend S220 ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S220 (Legend Crusader) */ { aac_rx_init, "aacraid", "Legend ", "Legend S230 ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S230 (Legend Vulcan) */ _
| |